Under Development LQ121S1DG11 Color TFT-LCD Module (FA/POS/Banking terminals) Features ■ 31 cm [12.1"] SVGA format ■ Built-in long life CCFT backlight (50 000 h) ■ Easy replaceable lamp (CCFT) ■ High brightness (250 cd/m2) ■ Wide viewing angle (Horizontal: 140° Vertical: 110°) ■ Power supply/voltage: 3.3 V/5.0 V Specifications Parameter Unit Display size Dot format (H x V) Dot pitch (H x V) Active area (H x V) Color Input signal Viewing direction Backlight type 31 [12.1] cm [ "] 800 x RGB x 600 dot 0.1025 x 0.3075 mm 246.0 x 184.5 mm 262 144 (6-bit each color) Digital RGB 6:00 2CCFT(E) - Parameter Unit Brightness 250 cd/m2 Contrast ratio 300 : 1 Power consumption 7.5 W Outline dimensions (W x H x D) 290.0 x 225.0 x 13.2 mm Weight 830 g Operating temperature 0 to +50 °C Storage temperature -25 to +60 °C Outline Dimensions unit : mm Bezel Opening 249.0 x 187.5 171 85.5 110 213 225 38 Arrow shows 6 o'clock viewing angle Active Area 246.0 x 184.5 6.65 90 2-3.4 290 Active Area Center 2.5 5.5 13.2 6 4.75 149.5 4 In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Specifications are subject to change without notice for improvement. 129.5 283 90