New Product LQ121S1DG31 Color TFT-LCD Module (FA/POS/Measuring instruments) Features ■ 31 cm [12.1"] SVGA format ■ High brightness (300 cd/m2) ■ Built-in long life CCFT backlight (50 000 h, easily replaceable) ■ Wide viewing angle ■ Connector is attached from the back of the module (Horizontal: 140° Vertical: 110°) Specifications Parameter Display size Dot format (H x V) Dot pitch (H x V) Active area (H x V) Color Input signal Viewing direction Backlight type 31 [12.1] 800 x RGB x 600 0.1025 x 0.3075 246.0 x 184.5 262 144 6-bit CMOS 6:00 2CCFT(E) Unit Parameter Unit cm [ "] dot mm mm - Brightness 300 cd/m2 Contrast ratio 300 : 1 Power consumption 7.2 W Outline dimensions (W x H x D) 276.0 x 209.0 x 14.0 mm Weight 775 g Operating temperature 0 to +50 °C Storage temperature -25 to +60 °C Outline Dimensions unit : mm 14 MAX 14MAX 276 2.7 5.5 3 1 3 1 CN3 Active Area 246 x 184.5 2 7.5 2.5 2.5 14MAX 14MAX 4 5.5 In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Specifications are subject to change without notice for improvement. (161) Active Center 97 209 185.8 14MAX 14MAX 2.5 CN2 4.5 Bezel Opening 249 x 187.5 90 3.4 Mounting Hole 270.3 136.5 19.2 2.5 3.4 Mounting Hole 138 23 3 5.5 5.5