Telefon: +49 (0) 6135 931069 Telefax: +49 (0) 6135 931070 www.peak-electronics.de [email protected] P6DG-XXXXE 1KV ISOLATED 1 W REGULATED SINGLE OUTPUT DIP14 Available Inputs: 5, 12 and 24 VDC Available Outputs: 3.0, 3.3, 5, 9, 12 and 15 VDC Other specifications please enquire. Electrical Specifications (Typical at + 25° C, nominal input voltage, rated output current unless otherwise specified) Input Specifications Voltage range +/- 10 % Filter Capacitors Isolation Specifications Rated voltage 1000 VDC Resistance 109 Ohm Capacitance 60 pF typ. Output Specifications Voltage accuracy +/- 2 % Ripple and noise (at 20 MHz BW) 50 mV p-p, max. Short circuit protection Short term Line voltage regulation +/- 0,5 % max. (3.3 VDC output +/- 1% max.) Load voltage regulation +/- 0,5 % typ., +/- 1% max. (no load/full load) Temperature coefficient +/- 0,02 % / °C General Specifications Efficiency 58 % to 66 % Switching frequency 70 KHz, typ. Environmental Specifications Operating temperature (ambient) - 40° C to + 85° C Storage temperature - 55 °C to + 125 °C Derating See graph Humidity Up to 90 %, non condensing Cooling Free air convection Physical Characteristics Dimensions DIP 20,32 x 10,16 x 6,88 mm 0,80 x 0,40 x 0,27 inches Weight 2,0 g Case material Non conductive black plastic Examples of Partnumbers/Modelcode PART NO. P6DG-0503E P6DG-053R3E P6DG-054R8E P6DG-0505E P6DG-0509E P6DG-0512E P6DG-1203E P6DG-123R3E P6DG-124R8E P6DG-1205E P6DG-1209E P6DG-1212E P6DG-2403E P6DG-243R3E P6DG-244R8E P6DG-2405E P6DG-2409E P6DG-2412E INPUT VOLTAGE (VDC) INPUT CURRENT NO LOAD INPUT CURRENT FULL LOAD OUTPUT VOLTAGE (VDC) OUTPUT CURRENT (max. mA) EFFICIENCY FULL LOAD (% TYP.) 5 5 5 5 5 5 12 12 12 12 12 12 24 24 24 24 24 24 20 22 25 28 32 45 15 15 15 16 16 22 8 8 7 7 10 10 200 220 318 312 312 312 83 92 133 130 123 123 43 47 64 64 63 63 3 3,3 4,85 5 9 12 3 3,3 4,85 5 9 12 3 3,3 4,85 5 9 12 200 200 200 200 111 84 200 200 200 200 111 84 200 200 200 200 111 84 60 60 61 63 64 64 60 60 61 64 68 68 58 58 63 65 66 66 P6DG-XXXXE 1KV ISOLATED 1 W REGULATED SINGLE OUTPUT DIP14 Dimensions 7.62 (0.30) 1 7 Bottom View 8 14 0.50 (0.02) 2.54 (0.10) 6.88 (0.27) 0.25 (0.01) 15.24 (0.60) 20.32 (0.80) 10.16 (0.40) PEAK Modelcode Datecode 3.05 (0.12) All dimensions are typical in millimeters (inches). Tolerance x.xx = +/- 0.30 (+/- 0.01) Specification may change without notice. Pin length is typical. Derating Graph and Pinning Output in W Temperature Derating Graph Ambient Temperature ° C 85 1.50 1.25 1.00 0.75 0.60 Pin # 1 7 8 9 10 11 14 Connection Single - V Input N. C. Omitted + V Output Omitted - V Output + V Input Safe operating area - 40 0 40 80 100 If specification prior to this data sheet is needed, please enquire. Specification can be changed without notice. REV:A / 06.2003 Copyright PEAK electronics GmbH