SHINDENGEN TSS KT Series KT10L07 OUTLINE DIMENSIONS Case : TO-221 (Unit : mm) RATINGS ●Absolute Maximum Ratings Item Storage Temperature Junction Temperature Maximum Off-State Voltage Surge On-State Current ●Electrical Characteristics (Tl=25℃) Item Breakover Voltage Off-State Current Holding Current On-State Voltage Junction Capacitance Clamping Voltage Symbol Tstg Tj VDRM I TSM Symbol VBO IDRM IH VT Cj VCL Copyright & Copy;2000 Shindengen Electric Mfg.Co.Ltd Conditions 10/1000μs, Non-repetitive 10/200μs, Non-repetitive 8/20μs, Non-repetitive Conditions Pulse measurement (Peak hold) VD = VDRM Pulse measurement IT = 2A f = 1kHz OSC = 1V, VD = 50V dv/dt = 100V/μs Ratings -40∼125 125 58 100 150 250 Unit ℃ ℃ V Ratings Min 65 Max 10 Min 100 TYP 1.15 Max 180 Unit V μA mA V pF Max 80 V A KT10L07 On-State Voltage - On-State Current TYP On-State Current IT [A] 100 10 Pulse measurement 1 0 1 2 3 4 5 On-State Voltage VT [V] 6 7 Breakover Voltage Ratio VBO(T) / VBO(Tj=25°C) 0.8 -40 0.85 0.9 0.95 1 1.05 1.1 0 40 80 120 TYP Pulse test Peak hold method Breakover Voltage - Junction Temperature Junction Temperature Tj [°C] KT10L07 Holding Current IH(Tj) / IH(Tj=25°C) 0 -40 0.5 1 1.5 2 2.5 3 0 40 80 Holding Current - Junction Temperature Junction Temperature Tj [°C] KT10L07 120 TYP Pulse test Junction Capacitance Cj [pF] 10 100 1000 1 10 100 Junction Capacitance Frequency f [kHz] KT10L07 VD = 50V VD = 0V 1000 TYP Junction Capacitance Cj [pF] 10 0.1 100 1000 10 Junction Capacitance Off-State Applied Voltage VD [V] 1 KT10L07 TYP f = 1kHz 100