SHINDENGEN TSS KU Series KU10R29N SMD OUTLINE DIMENSIONS Case : M2F (Unit : mm) RATINGS ●Absolute Maximum Ratings Item Storage Temperature Junction Temperature Operating Temperature Maximum Off-State Voltage Surge On-State Current ●Electrical Characteristics (Tc=25℃) Item Breakover Voltage Off-State Current Holding Current On-State Voltage Junction Capacitance Symbol Ratings Conditions Tstg -40~125 Tj 125 Top -40~70 VDRM 250 ITSM Pulse-waveform 10/1000μs, Non-repetitive 100 Symbol VBO IDRM IH VT Cj Copyright & Copy;2000 Shindengen Electric Mfg.Co.Ltd Conditions dv/dt = 8V/ms (Peak hold) VD = VDRM Pulse measurement IT = 2A f = 1kHz OSC = 1V, DC = 50V Ratings Min 275 Max 5.0 Min 150(100) TYP 1.60 Max 90 Unit ℃ ℃ ℃ V A Unit V μA mA V pF KU10R29N On-State Voltage - On-State Current On-State Current IT [A] 100 Tl=25°C [TYP] 10 Pulse measurement 1 0 1 2 3 4 5 On-State Voltage VT [V] 6 7 8 Breakover Voltage Ratio VBO(T) / VBO(Tj=25°C) 0.8 -40 0.85 0.9 0.95 1 1.05 1.1 -20 0 20 40 60 80 100 120 TYP Pulse test Peak hold method Breakover Voltage - Junction Temperature Junction Temperature Tj [°C] KU10R29N Holding Current IH(Tj) / IH(Tj=25°C) 0 -40 0.5 1 1.5 2 2.5 3 -20 0 40 60 80 100 Holding Current - Junction Temperature Junction Temperature Tj [°C] 20 KU10R29N 120 TYP Pulse test Junction Capacitance Cj [pF] 10 100 1 10 100 Junction Capacitance Frequency f [kHz] KU10R29N VD = 50V VD = 0V 1000 TYP Junction Capacitance Cj [pF] 10 0.1 100 1000 10 Junction Capacitance Off-State Applied Voltage VD [V] 1 KU10R29N TYP f = 1kHz Tl = 25°C