SIPEX SPX1432

SPX1432
®
1.24V Precision Adjustable Shunt Regulator
FEATURES
■
■
■
■
■
■
■
■
ANODE
Reference Voltage: 1.24V
Initial Accuracy: 0.5%
Wide Operating Current, 60µA to 100mA
Ultra Low Reference Input Current, 100nA
Operating Voltage Range: VREF to 20V
0°C to 105°C Guaranteed Operation
SOT-23-3 Package
Upgrade to LMV431, TLV431, SC431L
3
3
SPX1432
1
2
1
2
REF
CATHODE
Now Available in Lead Free Packaging
APPLICATIONS
■
■
■
■
■ Switching Power Supplies
■ Adjustable Supplies
■ Error Amplifiers
Single Supply Amplifier
Monitors / VCRs / TVs
Personal Computers
Voltage References
DESCRIPTION
The SPX1432 is a three terminal adjustable shunt voltage regulator that provides a highly accurate 1.24V
bandgap reference with 0.5% accuracy, eliminating the need for trimming in most power supply designs.
Offered in the tiny SOT-23 package, the SPX1432 has an extremely wide operating current range of 60uA
to 100mA, and reference input current of only 100nA (typ). The SPX1432 can regulate outputs from VREF
to 20V, using two external resistors, and is guaranteed over the extended commercial temperature range
of 0°C to 105°C.
The combination of the small size, wide output current capability, flexible voltage range, and stable
performance over the entire extended commercial temperature range, makes the SPX1432 the ideal
candidate a variety of shunt regulator and current source designs in applications such as Portable meters,
Instrumentation, and Industrial Process Control.
FUNCTIONAL DIAGRAM
Cathode (K)
Reference
(R)
+
1.24V
Anode (A)
Date: 5/6/04
SPX1432 1.24V Precision Adjustable Shunt Regulator
1
© Copyright 2004 Sipex Corporation
ABSOLUTE MAXIMUM RATINGS
Cathode-Anode Reverse Breakdown VKZ ....................................... 22V
Anode-Cathode Forward Current, (<10ms) IAK ................................. 1A
Operating Cathode Current IKA .................................................. 120mA
Reference Input Current IREF .......................................................... 1mA
Continuos Power Dissipation at 25°C PD
SOT-23 .................................................................. 200 mW
Junction Temperature TJ ........................................................... 150 °C
Storage Temperature TSTG .............................................. -65 to 150 °C
Lead Temperature (Soldering 10 sec.) TL .................................. 300°C
Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
TYPICAL THERMAL RESISTANCES
RECOMMENDED CONDITIONS
PARAMETER
SYMBOL
RATING
UNIT
Cathode Voltage
VKA
VREF to 20
V
Cathode Current
IK
10
mA
PACKAGE
SOT-23
θJA
θJC
575°C/W 150°C/W
TYPICAL
DERATING
1.7 mW/°C
Typical deratings of the thermal resistances are given for ambient
temperature >25°.
ELECTRICAL CHARACTERISTICS
Electrical characteristics are guaranted over the full junction temperature range (0°C to 105°C). Ambient temperature must
be derated based upon power dissipation and package thermal characteristics. Unless otherwise specified, test conditions are:
VKA = VREF and IK = 10mA.
PARAMETER
SYMBOL
FIGURE CONDITIONS
MIN
Accuracy 0.5%
Output Voltage
TYP
MAX
UNITS
1.240
1.246
V
mV
SPX1432A
VREF
2
TJ = 25°C
Temperature Deviation
VREF
2
0 < TJ < 105°C
6
12
Line Regulation
VREF
3
VKA = 1.25V to 15V
15
37
mV
Load Regulation
VREF
2
IK = 100µA to 100mA
10
30
mV
Reference Input Current
IREF
3
TJ = 25°C, R1 = 10KΩ, R2 = ∞
0.1
0.3
µA
Reference Input Current
Temperature Coefficient
IREF
3
0 < TJ < 105°C,
R1 = 10KΩ, R2 = ∞
0.05
0.2
µA
Minimim Cathode
Current for Regulation
IK(MIN)
2
TJ = 25°C
60
80
µA
Off State Leakage
IK(MIN)
4
VREF = 0V, VKA = 18V, TJ = 25°C
0.01
500
nA
TYP
MAX
UNITS
PARAMETER
SYMBOL
FIGURE CONDITIONS
1.234
MIN
Accuracy 1.0%
SPX1432
Output Voltage
VREF
2
TJ = 25°C
Temperature Deviation
VREF
2
0 < TJ < 105°C
Line Regulation
VREF
3
VKA = 1.25V to 15V
15
37
mV
Load Regulation
VREF
2
IK = 100µA to 100mA
10
30
mV
Reference Input Current
IREF
3
TJ = 25°C, R1 = 10KΩ, R2 = ∞
0.1
0.5
µA
Reference Input Current
Temperature Coefficient
IREF
3
0 < TJ < 105°C,
R1 = 10KΩ, R2 = ∞
0.05
0.4
µA
Minimim Cathode
Current for Regulation
IK(MIN)
2
TJ = 25°C
60
100
µA
Off State Leakage
IK(MIN)
4
VREF = 0V, VKA = 18V, TJ = 25°C
0.01
500
nA
Date: 5/6/04
SPX1432 1.24V Precision Adjustable Shunt Regulator
2
1.228
1.240
1.252
V
9
18
mV
© Copyright 2004 Sipex Corporation
CALCULATION AVERAGE TEMPERATURE COEFICIENT (TC)
ppm
0
%
mV
0
0
∆VREF(mV)
∆TA
• TC in mV / °C =
∆VREF
∆T
• TC in % / °C =
-5
5000
(
∆VREF
∆VREF at 25°C
15
30
45
60
75
90
• TC in ppm / °C =
105
x 100
∆TA
0.5
0
)
(
∆VREF
∆VREF at 25°C
)
x 106
∆TA
Junction Temperature (°C)
0.0033mV /°C
0.0027% / °C
27ppm/°C
Figure 1. VREF VS Temperature.
TEST CIRCUITS
VIN
VIN
VKA = VREF
VKA
VIN
VKA
IK (OFF)
IREF
R1
IK
IREF
IK
(VREF)
R2
Figure 2. Test Circuit for VKA = VREF
Figure 3. Test Circuit for VKA > VREF
Figure 4. Test Circuit for IKOFF
TYPICAL PERFORMANCE CHARACTERISTICS
15.0
IK Cathode Current (mA)
10.0
200
VKA = VREF
25°C
IREF-Reference Input Current (nA)
12.5
7.5
5.0
2.5
0
-2.5
-5.0
160
120
80
40
-7.5
-10.0
-2
1.24
-1
0
1
0
2
-60
3
-40
0
20
40
60
80
100 120
Reference Input Current VS Ambient Temperature.
High Current Operating Characteristics.
Date: 5/6/04
-20
TA-Ambient Temperature (°C)
VKA Cathode Voltage (V)
SPX1432 1.24V Precision Adjustable Shunt Regulator
3
© Copyright 2004 Sipex Corporation
TYPICAL PERFORMANCE CHARACTERISTICS: Continued
1.25
1.245
VKA--Cathode Voltage (V)
VREF-Reference Voltage (V)
1.25
1.24
1.235
1.23
1.225
1.22
-60
-30
0
30
60
90
1.245
1.24
1.235
0.01
120
0.1
1
10
Ik--cathode Current (mA)
TA-Ambient Temperature (°C)
Reference Voltage VS Ambient Temperature.
100
Reference Voltage Load Regulation.
0
Ikoff Cathode Current (nA)
1000.0000
DVREF(mV)
-10
-20
-30
100.0000
10.0000
1.0000
0.1000
0.0100
0.0010
0.0001
-40
0
-50
3
6
9
12
15
18
21
0
50
100
150
Ta Ambient Temperature (C)
VKA-Cathode Voltage (V)
Reference Voltage Line Regulation.
VIN
Off State Leakage VS Ambient Temperature.
R
VOUT
IK
fP = 100kHz
Ch1-VIN
50Ω
Ch2-VKA
GND
Test Circuit for Pulse Response.
Date: 5/6/04
IKA = 0 to 100µA.
SPX1432 1.24V Precision Adjustable Shunt Regulator
4
© Copyright 2004 Sipex Corporation
TYPICAL PERFORMANCE CHARACTERISTICS: Continued
IKA = 0 to 300µA.
IKA = 0 to 1mA.
IKA = 0 to 10mA.
IKA = 0 to 50mA.
IKA = 0 to 80mA
IKA = 0 to 100mA
Date: 5/6/04
SPX1432 1.24V Precision Adjustable Shunt Regulator
5
© Copyright 2004 Sipex Corporation
PACKAGE: 3 PIN SOT23
D
b
B
3
B
E1
1
SEE VIEW C
E
2
e
Gauge Plane
e1
L2
L
L1
VIEW C
3 PIN SOT-23
JEDEC TO-236
(AB) Variation
Dimensions in (mm)
A
MIN
A
0.89
A1
0.01
A2
NOM MAX
-
1.12
-
0.88
.95
-
0.50
c
0.08
-
0.20
2.90
e
0.95 BSC
e1
1.90 BSC
E
2.10
E1
1.20
L
0.30
SIDE VIEW
b
WITH PLATING
-
2.64
1.40
c
0.60
0.54 REF
L1
Ø
C
A1
3.04
1.30
0.45
A
1.02
0.30
2.80
Seating Plane
0.10
b
D
A2
A
BASE METAL
0º
-
8º
3 PIN SOT-23
Date: 5/6/04
SPX1432 1.24V Precision Adjustable Shunt Regulator
6
© Copyright 2004 Sipex Corporation
ORDERING INFORMATION
PART NUMBER
ACC
OUTPUT VOLTAGE
TOP MARK
SPX1432AM ............ 0.5% .................. 1.24V .......................... W1 ............
SPX1432AM/TR ...... 0.5% .................. 1.24V .......................... W1 ............
SPX1432M ............... 1.0% .................. 1.24V ........................... F2 ............
SPX1432M/TR ......... 1.0% .................. 1.24V ........................... F2 ............
PACKAGES
3-Pin SOT-23
3-Pin SOT-23
3-Pin SOT-23
3-Pin SOT-23
Available in lead free packaging. To order add “-L” suffix to part number.
Example: SPX1432AM/TR = standard; SPX1432AM-L/TR = lead free
/TR = Tape and Reel
Pack quantity is 2500 for SOT-23.
Corporation
ANALOG EXCELLENCE
Sipex Corporation
Headquarters and
Sales Office
233 South Hillview Drive
Milpitas, CA 95035
TEL: (408) 934-7500
FAX: (408) 935-7600
Sipex Corporation reserves the right to make changes to any products described herein. Sipex does not assume any liability arising out of the
application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others.
Date: 5/6/04
SPX1432 1.24V Precision Adjustable Shunt Regulator
7
© Copyright 2004 Sipex Corporation