TK15420 75 Ω VIDEO LINE DRIVER FEATURES APPLICATIONS ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Fixed Gain (6 dB) Internal 75 Ω Drivers Very Small Output Capacitor at SAG Function Pin Active High ON/OFF Control Very Low Standby Current (typ. ICCS ≤ 25 µA) Internal Summing Circuit of Y/C Signal. Video Equipment Digital Cameras CCD Cameras TV Monitors Video Tape Recorders LCD Televisions DESCRIPTION TK15420 The TK15420M is a vidoe line driver IC which contains 2 channels. It is an operational amplifier type and the voltage gain is adjustable with an external resistor. VCC OUTPUT A It is suitable for replacement of Motorola’s video line driver IC MC14577CF. -INPUT A OUTPUT B +INPUT A -INPUT B VEE +INPUT B The TK15420M is available in the SOP-8 surface mount package. - + ORDERING INFORMATION + - BLOCK DIAGRAM TK15420M Tape/Reel Code TAPE/REEL CODE TL: Tape Left August 1999 TOKO, Inc. Page 1 TK15420 ABSOLUTE MAXIMUM RATINGS Supply Voltage ......................................................... 14 V Operating Voltage Range ............................ 4.0 to 12.0 V Power Dissipation (Note 1) ................................ 400 mW Storage Temperature Range ................... -55 to +150 °C Operating Temperature Range ...................-25 to +85 °C Input Frequency .................................................. 20 MHz TK15408M ELECTRICAL CHARACTERISTICS Test conditions: VCC = 5.0 V, VEE = -5.0 V, TA = 25 °C unless otherwise specified. SYMBOL PARAMETER TEST CONDITIONS MI N TYP MAX UNITS ICC Supply Current No signal 16.9 23.0 mA IIB Input Bias Current Input terminal 5.0 15.0 µA GVA Voltage Gain fin = 1 MHz, VIN = 1 VP-P 5.9 6.2 dB fr Frequency Response fin = 1 MHz / 10 MHz VOPP Maximum Output Voltage Swing DC voltage DG Differential Gain DP 5.6 -0.5 dB 5.0 5.7 VP-P VIN = 1 VP-P, Staircase -3.0 0.3 +3.0 % Differential Phase VIN = 1 VP-P, Staircase -3.0 0.4 +3.0 deg CT Cross Talk fIN = 4.43 MHz, VIN = 1 VP-P 50.0 63.4 dB SVRR Supply Voltage Rejection Ratio ∆ V = 0.4 VP-P, fIN = 100 kHz 48.6 dB CIN Input Capacitance 8.6 pF ZIN Input Impedance 5.0 MΩ Note 1: Power dissipation is 400 mW when mounted as recommended. Derate at 3.2 mW/°C for operation above 25°C. Note 2: Turn on in order of VEE and VCC when using this IC with two power supplies. Page 2 August 1999 TOKO, Inc. TK15420 TEST CIRCUIT VCC 5V + 2 kΩ 75 Ω 47 µF 2 kΩ 75 Ω 75 Ω August 1999 TOKO, Inc. 47 µF + VEE 5V Page 3 TK15420 PACKAGE OUTLINE Marking Information 0.76 1.27 SOP-8 Marking 420 5.4 TK15420 e1 Mark 3.9 e 1.27 + 0.15 1.75 max 1.45 1.27 0 ~ 0.25 e + 0.15 0.42 - 0.05 6.0 0.2 - 0.05 0.5 4.9 0 ~ 10 Recommended Mount Pad + 0.3 0.1 0.12 M Dimensions are shown in millimeters Tolerance: x.x = ± 0.2 mm (unless otherwise specified) Toko America, Inc. Headquarters 1250 Feehanville Drive, Mount Prospect, Illinois 60056 Tel: (847) 297-0070 Fax: (847) 699-7864 TOKO AMERICA REGIONAL OFFICES Midwest Regional Office Toko America, Inc. 1250 Feehanville Drive Mount Prospect, IL 60056 Tel: (847) 297-0070 Fax: (847) 699-7864 Western Regional Office Toko America, Inc. 2480 North First Street , Suite 260 San Jose, CA 95131 Tel: (408) 432-8281 Fax: (408) 943-9790 Eastern Regional Office Toko America, Inc. 107 Mill Plain Road Danbury, CT 06811 Tel: (203) 748-6871 Fax: (203) 797-1223 Semiconductor Technical Support Toko Design Center 4755 Forge Road Colorado Springs, CO 80907 Tel: (719) 528-2200 Fax: (719) 528-2375 Visit our Internet site at http://www.tokoam.com The information furnished by TOKO, Inc. is believed to be accurate and reliable. However, TOKO reserves the right to make changes or improvements in the design, specification or manufacture of its products without further notice. TOKO does not assume any liability arising from the application or use of any product or circuit described herein, nor for any infringements of patents or other rights of third parties which may result from the use of its products. No license is granted by implication or otherwise under any patent or patent rights of TOKO, Inc. Page 4 August 1999 TOKO, Inc.