For assistance or to order, call (800) 531-5782 PT6670 ADVANCED INFORMATION - AVAILABLE 3Q98 Series 3.3V INPUT 20W BOOST INTEGRATED SWITCHING REGULATOR • • • • • Input Voltage Range: 3.0 to 3.6V Adjustable Output Voltage 85% Efficiency Remote Sense Capability Soft Start Pin-Out Information Pin Standard Application VOAdjust REMOTE SENSE 14 VIN 4,5,6 C1 1 PT6670 + VOUT 11,12,13 7,8,9,10 C2 + GND LOAD GND C1 = Required 560µF electrolytic C2 = Required 560µF electrolytic 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Function Remote Sense Do not connect Do not connect The PT6670 series is a new addition to the Power Trends high performance family of 14-Pin SIP (Single In-line Package) Integrated Switching Regulators (ISRs), designed for 3.3V bus applications needing 5 to 12 volts for auxilliary circuits at up to 20W of output power. Ordering Information PT6671¨ = +5.0 Volts PT6672¨ = +9.0 Volts PT6673¨ = +12.0 Volts Vin Vin Vin GND GND GND GND Vout Vout Vout Vout Adjust Revised 11/18/98 PT Series Suffix (PT1234X) Case/Pin Configuration Heat Spreader Vertical Through-Hole Horizontal Through-Hole Horizontal Surface Mount P D E Pkg Style 400 Note: Back surface of product is conducting metal. PT6670 Preliminary Specifications PT6670 SERIES Characteristics (Ta = 25°C unless noted) Symbols Conditions Min Typ Max Units Output Current Io Ta = 60°C, 200 LFM, pkg P Ta = 25°C, natural convection 0.1 0.1 0.1 0.1 — — — — TBD 4.0 2.2 1.7 A A A A Input Voltage Range Vin Over Vo and Io range 3.0 — 3.6 V Inrush Current Iir On start-up — — TBD A Output Voltage Tolerance ∆Vo Vin = +3.3V, Io = I omax Ta = 0°C to 65°C — 1.5 — %Vo Output Voltage Adjust Range Voadj Pin 14 to Vo or ground — — — TBD TBD TBD — — — V Line Regulation Regline Over Vin range, I o = Iomax — ±0.25 ±0.5 %Vo Load Regulation Regload Vin = +3.3V, 0.1 ≤ Io ≤ Iomax — ±0.25 ±0.5 %Vo Vo Ripple/Noise Vn Vin = +3.3V, Io = Iomax — 3 — %Vo Transient Response with C1= C2= 560µF t tr Vos Io step between ½Iomax and Iomax Vo over/undershoot — — 500 5 — — µSec %Vo Efficiency h Vin = +3.3V, Io = ½Iomax Vo = +5V Vo = +9V Vo = +12V — — — 87 86 87 — — — % % % Vin = +3.3V, Io = Iomax Vo = +5V Vo = +9V Vo = +12V — — — 84 80 82 — — — % % % Vo= +5V Vo= +9V Vo= +12V Vo= +5V Vo= +9V Vo= +12V Note: The PT6670 Series requires two 560µF electrolytic capacitors (input and output) for proper operation in all applications. Please note that this product does not include short circuit protection. Power Trends, Inc. 27715 Diehl Road, Warrenville, IL 60555 (800) 531-5782 Fax: (630) 393-6902 http://www.powertrends.com For assistance or to order, call PT6670 (800) 531-5782 Series Preliminary Specifications (continued) PT6670 SERIES Symbols Conditions Min Typ Max Units Switching Frequency ƒo 3.0V ≤ V in ≤ 3.6V 0.1A ≤ I o ≤ Iomax — 300 — kHz Absolute Maximum Operating Temperature Range Ta -40 — +85 °C Recommended Operating Temperature Range Ta -40 — +65 °C Thermal Resistance θja Free Air Convection (40-60 LFM) — TBD — °C/W Storage Temperature Ts — -40 — +125 °C Mechanical Shock — Per Mil-STD-883D, Method 2002.3 — 500 — G’s Mechanical Vibration — Per Mil-STD-883D, Method 2007.2, 20-2000 Hz, soldered in a PC board — 7.5 — G’s Weight — — — 14 — grams Free Air Convection (40-60 LFM) Over Vin and Io ranges with heat tab Note: The PT6670 Series requires two 560µF electrolytic capacitors (input and output) for proper operation in all applications. Please note that this product does not include short circuit protection. C H A R A C T E R I S T I C D A T A PT6670 Series (@ Vin=+3.3V) (See Note 1) Efficiency vs Output Current 100 Efficiency - % 90 PT6671 PT6672 PT6673 80 70 60 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Iout-(Amps) Ripple vs Output Current 200 180 160 Ripple-(mV) 140 120 PT6671 PT6672 PT6673 100 80 60 40 20 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Iout-(Amps) Power Dissipation vs Output Current 6 PD-(Watts) 5 4 PT6671 PT6672 PT6673 3 2 1 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Iout-(Amps) Note 1: All data listed in the above graphs has been developed from actual products tested at 25°C. This data is considered typical data for the ISR. Power Trends, Inc. 27715 Diehl Road, Warrenville, IL 60555 (800) 531-5782 Fax: (630) 393-6902 http://www.powertrends.com DATA SHEETS Characteristics (Ta = 25°C unless noted) IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1999, Texas Instruments Incorporated