IXGH 15N120C IXGT 15N120C IGBT Lightspeed Series VCES = 1200 V = 30 A IC25 VCE(sat) = 3.8 V tfi(typ) = 115 ns Preliminary data Symbol Test Conditions Maximum Ratings VCES TJ = 25°C to 150°C 1200 V VCGR TJ = 25°C to 150°C; RGE = 1 MW 1200 V VGES Continuous ±20 V VGEM Transient ±30 V IC25 TC = 25°C 30 A IC90 TC = 90°C 15 A ICM TC = 25°C, 1 ms 60 A SSOA (RBSOA) VGE = 15 V, TVJ = 125°C, RG = 10 W Clamped inductive load PC TC = 25°C ICM = 40 @ 0.8 VCES A 150 W -55 ... +150 °C TJM 150 °C Tstg -55 ... +150 °C TJ Maximum Lead temperature for soldering 1.6 mm (0.062 in.) from case for 10 s Maximum Tab temperature for soldering SMD devices for 10 s Md Mounting torque (M3) 300 °C 260 °C 1.13/10 Nm/lb.in. Weight TO-247 AD TO-268 6 4 g g TO-268 (IXGT) G E (TAB) TO-247 AD (IXGH) G C (TAB) C E G = Gate, E = Emitter, C = Collector, TAB = Collector Features • International standard packages JEDEC TO-268 surface and JEDEC TO-247 AD • Low switching losses • MOS Gate turn-on - drive simplicity Applications Symbol Test Conditions BVCES VGE(th) IC IC ICES VCE = VCES VGE = 0 V IGES VCE = 0 V, VGE = ±20 V VCE(sat) IC Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. = 250 mA, VGE = 0 V = 250 mA, VCE = VGE 1200 2.5 TJ = 25°C TJ = 125°C = IC90, VGE = 15 V TJ = 125°C IXYS reserves the right to change limits, test conditions, and dimensions. © 2000 IXYS All rights reserved 3.0 5 V V 100 3.5 mA mA ±100 nA 3.8 V V • • • • • AC motor speed control DC servo and robot drives DC choppers Uninterruptible power supplies (UPS) Switched-mode and resonant-mode power supplies Advantages • High power density • Suitable for surface mounting • Easy to mount with 1 screw, (mounting screw hole) 98633A (7/00) 1-2 IXGH 15N120C IXGT 15N120C Symbol Test Conditions Characteristic Values (TJ = 25°C, unless otherwise specified) min. typ. max. gfs IC = IC90; VCE = 10 V, Pulse test, t £ 300 ms, duty cycle £ 2 % C ies Coes VCE = 25 V, VGE = 0 V, f = 1 MHz C res Qg Qge IC = IC90, VGE = 15 V, VCE = 0.5 VCES Qgc td(on) Inductive load, TJ = 25°C t ri IC = IC90, VGE = 15 V VCE = 0.8 VCES, RG = Roff = 10 W td(off) tfi Eoff td(on) t ri Eon td(off) tfi Eoff Remarks: Switching times may increase for VCE (Clamp) > 0.8 • VCES, higher TJ or increased RG Inductive load, TJ = 125°C IC = IC90, VGE = 15 V VCE = 0.8 VCES, RG = Roff = 10 W Remarks: Switching times may increase for VCE (Clamp) > 0.8 • VCES, higher TJ or increased RG 12 15 S 1720 pF 95 pF 35 pF 69 nC 13 nC 26 nC 25 ns 15 Dim. Millimeter Min. Max. Inches Min. Max. A B 19.81 20.32 20.80 21.46 0.780 0.800 0.819 0.845 C D 15.75 16.26 3.55 3.65 0.610 0.640 0.140 0.144 mJ E F 4.32 5.49 5.4 6.2 0.170 0.216 0.212 0.244 25 ns G H 1.65 2.13 4.5 0.065 0.084 0.177 18 ns 0.60 mJ J K 1.0 1.4 10.8 11.0 0.040 0.055 0.426 0.433 220 ns L M 4.7 0.4 5.3 0.8 0.185 0.209 0.016 0.031 250 ns N 1.5 2.49 0.087 0.102 2.1 mJ 150 200 ns 115 190 ns 1.05 1.6 TO-268AA (D3 PAK) 0.83 K/W RthJC RthCK ns TO-247 AD (IXGH) Outline (TO-247) 0.25 K/W Min. Recommended Footprint Dim. A A1 A2 b b2 C D E E1 e H L L1 L2 L3 L4 © 2000 IXYS All rights reserved Millimeter Min. Max. 4.9 5.1 2.7 2.9 .02 .25 1.15 1.45 1.9 2.1 .4 .65 13.80 14.00 15.85 16.05 13.3 13.6 5.45 BSC 18.70 19.10 2.40 2.70 1.20 1.40 1.00 1.15 0.25 BSC 3.80 4.10 IXYS MOSFETS and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,881,106 5,017,508 5,049,961 5,187,117 5,486,715 4,850,072 4,931,844 5,034,796 5,063,307 5,237,481 5,381,025 Inches Min. Max. .193 .201 .106 .114 .001 .010 .045 .057 .75 .83 .016 .026 .543 .551 .624 .632 .524 .535 .215 BSC .736 .752 .094 .106 .047 .055 .039 .045 .010 BSC .150 .161 2-2