JT-N RELAYS COMPACT ECONOMICAL 30 AMP. RELAY FEATURES • High switching capacity — 30 A for 1 Form A • 2 contact arrangements — 1 Form A or 1 Form C • Sealed and “TMP” types available • UL/CSA recognized (PCB & TMP type: UL508 group A spacing, UL873 spacing) • Class F types standard for PCB & TMP type PCB type TMP type SPECIFICATIONS Contacts Characteristics PCB & TMP type Arrangement 1 Form A Initial contact resistance, max. (By voltage drop method, 6 V DC 1 A) Contact material Max. switching power Max. switchRating ing voltage Max. switching current 1 Form C 50 mΩ Silver alloy 277 V AC N.C.: 10 A N.O.: 20 A 30 A Min. 1×107 Expected life Mechanical Electrical (Resistive load) N.O.: 20 A 277 V AC Min. 1×105* N.C.: 10 A 277 V AC Min. 1×105* 20 A 277 V AC Min. 1×105* * For sealed types, the life shown is for open venting-hole condition. Coil at 20°C 68°F Minimum operating power Nominal operating power Release time (without diode)* (at nominal voltage) Functional*4 Shock resistance Destructive*5 3 N.C.: 2770 VA N.O.: 5440 VA 8310 VA Initial insulation resistance*1 Between contacts Initial breakdown Between contacts voltage*2 and coil Operate time*3 (at nominal voltage) PCB & TMP type Approx. 450 mW Approx. 800 mW Vibration resistance Functional*6 Destructive Ambient Conditions for operation, trans- temp. port and storage*7 (Not freezing and condensing at low Humidity temperature) Unit weight PCB & TMP type Min. 100 MΩ at 500 V DC 1,200 Vrms 2,500 Vrms Max. 15 ms Max. 10 ms Min. 98 m/s2 {10 G} Min. 980 m/s2 {100 G} Max. 88.2 m/s2 {9 G}, 10 to 55 Hz at double amplitude of 1.5 mm Max. 117.6 m/s2 {12 G}, 10 to 55 Hz at double amplitude of 2 mm –55°C to +85°C –67°F to +185°F 5 to 85% R.H. PCB type: Approx. 25 g (.88 oz) TMP type: Approx. 30 g (1.06 oz) Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Intial breakdown voltage” section *2 Detection current: 10 mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms; detection time: 10µs *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10µs *7 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24). TYPICAL APPLICATIONS • Automotive • Air conditioner • Heating & ventilation • Home appliance 118 JT-N ORDERING INFORMATION JT-N Relays (PCB and TMP type) JTN Contact arrangement 1a S TMP Protective construction 1a: 1 Form A 1: 1 Form C S: Sealed type F Mounting classtification DC12V Coil insulation PA: PCB type (UL508) TMP: TMP type (UL508) Coil voltage DC 5, 6, 9, 12, 15, 18, 24 V F: Class F UL/CSA approved type is standard. Note: DC rating is available for class A type. For the class A type, please consult us. COIL DATA (at 20°C 68°F) Nominal Pick-up voltage, Drop-out voltage, voltage, V DC V DC (max.) (Initial) V DC (min.) (Initial) 5 3.75 0.5 6 4.5 0.6 9 6.75 0.9 12 9.0 1.2 15 11.25 1.5 18 13.5 1.8 24 18.0 2.4 Coil resistance, Ω (±10%) Open PCB & TMP 26 31 38 45 94 101 155 180 256 281 380 405 660 720 Nominal operating power, mW Max. allowable voltage, V DC (at 70°C 158°F) Open PCB & TMP 962 800 6 947 800 7.2 862 800 10.8 930 800 14.4 879 800 18 853 800 21.6 873 800 28.8 DIMENSIONS mm inch 1. PCB type 3.6±0.5 20.2±0.6 .142±.020 .795±.024 26.9±0.6 1.059±.024 1 Form A Terminals 0.8×1.6 .031×.063 31.9±0.6 1.256±.024 3.6±0.5 20.2±0.6 .142±.020 .795±.024 26.9±0.6 1.059±.024 1 Form C Terminals 2-0.8×1.6 2-.031×.063 31.9±0.6 1.256±.024 PC board pattern (Copper-side view) 2-2.1 dia. 2-.083 dia. 2.54 .100 Coil Terminals 2-0.6 dia. 2-.024 dia. Terminal 1.14×1.14 .045×.045 Schematic (Bottom view) 15.24 .600 PC board pattern (Copper-side view) 3-2.1 dia. 3-.083 dia. 7.62 .300 Coil Terminals 2-0.6 dia. 2-.024 dia. Terminal 1.14×1.14 .045×.045 Schematic (Bottom view) 15.24 2.54 .600 .100 3.81 .150 2. TMP type 0.8±0.1 .031±.004 0.8±0.1 .031±.004 2-1.1 dia. 2-.043 dia. 13.97 .550 17.78 .700 3.6±0.5 27.9±0.6 .142±.020 1.096±.024 27.4±0.6 1.079±.024 6.35±0.1 .250±.004 1 Form A 3.81 .150 2-1.1 dia. 2-.043 dia. 13.97 .550 17.78 .700 Terminals 0.8×1.6 .031×.063 Tolerance: ±0.1 ±.004 3.6±0.5 27.9±0.6 .142±.020 1.096±.024 27.4±0.6 1.079±.024 6.35±0.1 .250±.004 1 Form C 0.8±0.1 .031±.004 N.C. N.O. Terminals 2-0.8×1.6 2-.031×.063 N.C. N.O. 32.2±0.6 1.268±.024 0.8±0.1 .031±.004 32.2±0.6 1.268±.024 COM COM Coil Terminals 2-0.6 dia. 2-.024 dia. Terminal 1.14×1.14 .045×.045 PC board pattern (Copper-side view) 6.20±0.5 .244±.020 2-2.1 dia. 2-.083 dia. 2.54 .100 Schematic 10.93±0.5 .430±.020 Coil Terminals 2-0.6 dia. 2-.024 dia. Terminal 1.14×1.14 .045×.045 PC board pattern (Copper-side view) 6.20±0.5 .244±.020 3-2.1 dia. 3-.083 dia. Schematic 10.93±0.5 .430±.020 7.62 .300 N.C. 15.24 .600 15.24 2.54 .600 .100 N.O. N.O. COM 3.81 .150 13.97 .550 17.78 .700 COM 2-1.1 dia. 2-.043 dia. 3.81 .150 (Top view) (Bottom view) 13.97 .550 17.78 .700 2-1.1 dia. 2-.043 dia. (Top view) (Bottom view) Tolerance: ±0.1 ±.004 119 JT-N REFERENCE DATA 1. Change of rate of pick-up and drop-out voltage (at 20°C 68°F) 2. Operate & release time (at 20°C 68°F) 3. Operate & release time (at 20°C 68°F) Sample: JTN1S-TMP-F-DC24V (6 pcs.) Sample: JTN1aS-PA-F-DC24V (6 pcs.) 40 Drop-out voltage 30 20 10 Pick-up voltage –55 –35 –15 5 25 45 65 85 105 –67 –31 +5 +41 +113+149+185+221 +77 Ambient –10 temperature, °C °F –20 Time, ms 20 Operate time 10 –30 Max. Min. Max. Min. Release time –40 0 80 90 100 110 Operate/release time, ms Rate of change, % Sample: JTN1S-TMP-F-DC24V (6 pcs.) 20 Operate time 10 Max. Min. Release time 0 120 80 Coil applied voltage,%V 4. Distribution frequency of pick-up voltage (at 20°C 68°F) 5. Distribution frequency of drop-out voltage (at 20°C 68°F) Sample: JTN1S-TMP-F-DC12V (30 pcs.) Sample: JTN1S-TMP-F-DC12V (30 pcs.) 6.-(1) Coil temperature rise (TMP type)* 5 80 Temperature rise, °C Distribution frequency Distribution frequency 10 90 100 110 120 Coil applied voltage,%V Ambient temperature: 20°C 68°F Sample: JTN1aS-TMP-F-DC12V (6 pcs.) 15 15 Max. Min. 10 5 20 A 60 10 A 40 20 0 0 7.3 7.5 7.7 7.9 8.1 8.3 8.5 0 3 3.2 3.4 3.6 3.8 4.0 4.2 Pick-up voltage, V 0 80 100 120 140 Coil applied voltage,%V Drop-out voltage, V * Coil temperature rise of sealed types are same as data of the dust cover type. Ambient temperature: 55°C 131°F Sample: JTN1aS-TMP-F-DC12V (6 pcs.) Ambient temperature: 85°C 185°F Sample: JTN1aS-TMP-F-DC12V (6 pcs.) 10 A 40 20 20 A 60 10 A 40 80 100 120 140 Coil applied voltage,%V 0 20 A 60 10 A 40 20 20 0 Temperature rise, °C 60 0 80 80 20 A Temperature rise, °C Temperature rise, °C 80 Ambient temperature: 105°C 221°F Sample: JTN1aS-TMP-F-DC12V (6 pcs.) 0 80 100 120 140 Coil applied voltage,%V 0 0 80 100 120 For Cautions for Use, see Relay Technical Information (Page 11 to 39). 120 140 Coil applied voltage,%V