RECTRON ISR10100 SEMICONDUCTOR TECHNICAL SPECIFICATION SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 100 Volts CURRENT 10 Amperes FEATURES * * * * * * * Low switching noise Low forward voltage drop Low thermal resistance High current capability High switching capability High surge capabitity High reliability ITO-220 MECHANICAL DATA * * * * * .114(2.9) .098(2.5) Case: ITo-220 molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 2.24 grams .04MAX. (1.0) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. .071(1.8) .055(1.4) .055(1.4) .039(1.0) .035(0.9) .020(0.5) .108(2.75) .091(2.30) For capacitive load, derate current by 20%. .138(3.5) .122(3.1) .406(10.3) .382(9.7) .185(4.7) .169(4.3) .134(3.4) .110(2.8) .602(15.3) .579(14.7) PIN 1 2 .154 (3.9) .138 (3.5) .531(13.5) .492(12.5) PIN 1 PIN 2 .114(2.9) .098(2.5) .031(0.8) .016 (0.4) Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) SYMBOL ISR10100 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 100 Volts Maximum RMS Voltage VRMS 70 Volts VDC 100 Volts IO 10 Amps I FSM 150 Amps RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Derating Case Temperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 1) RθJC 3 Typical Junction Capacitance (Note 3) CJ 500 Operating Temperature Range TJ -55 to + 150 0 C T STG -55 to + 150 0 C Storage Temperature Range 0 C/W pF ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 10.0A DC Maximum Average Reverse Current @T C = 25 o C at Rated DC Blocking Voltage @T C = 125 o C NOTES : 1. Thermal Resistance Junction to Case. 2. Suffix “A” = Common Anode. 3. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 4 “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. VF IR ISR10100 UNITS .80 Volts 190 uAmps 15 mAmps 2005-7 10 10 8 6 Single Phase Half Wave 60Hz Inductive or Resistive Load 4 2 PEAK FORWARD SURGE CURRENT, (A) 0 50 100 CASE TEMPERATURE, ( 150 ) FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 175 TC = 150 TC = 125 1.0 TC = 75 .1 TC = 25 .01 150 125 .001 8.3ms Single Half Sine-Wave (JEDED Method) 100 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 75 50 25 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 INSTANTANEOUS FORWARD CURRENT, (A) FIG. 4 - TYPICAL JUNCTION CAPACITANCE 4000 JUNCTION CAPACITANCE, (pF) FIG. 2 - TYPICAL REVERSE CHARACTERISTICS FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 12 INSTANTANEOUS REVERSE CURRENT, (mA) AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( ISR10100 ) 2000 1000 800 600 400 200 100 .1 .4 1.0 4 10 REVERSE VOLTAGE, ( V ) 40 80 100 FIG. 5 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 50 TJ = 125 10 TJ = 25 1.0 Pulse Width=300uS 1% Duty Cycle 0.1 .1 .2 .3 .4 .5 .6 .7 .8 .9 INSTANTANEOUS FORWARD VOLTAGE, (V) RECTRON