OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY1 Series Pb RoHS Compliant 20.8 x 13.2 x 8.2 mm | | | | | | | | | | | | | | APPLICATIONS: • Cellular Infrastructure • Radar Systems • Test & Measurement Equipment • GPS Tracking with precision hold-over accuracy • WiMax / WLAN FEATURES: • 20.8 x 13.2 x 8.2 mm Leaded- RoHS Compliant Reflow-able Package • AT-Cut, High “Q” resonator based design • Either Sinewave or CMOS RF output • Available with ±500 ppb over -40°C to +75°C operating temperature Range • Tighter Stabilities to ±50.0 ppb over 0°C to +50°C also available • Exceptional long-term Aging of ±3 ppm max. over 10-Year Product Life • Excellent close-in phase noise (-145 dBc/Hz Typical @1k Hz offset; 10MHz carrier) STANDARD SPECIFICATIONS: Parameters Minimum Typical Maximum Units Notes MHz Overall Frequency range RF Output Frequency Standard Available Frequencies Waveform Level "1" (Logic High) 10.00 100.00 10.00, 12.80, 13.00, 26.00, 38.88, 40.00, 100.00 MHz CMOS 0.9*Vdd Volts Level "0" (Logic Low) 0.1*Vdd Load 15 pf Rise & Fall Time Duty Cycle Waveform Peak Power Volts 45 6.0 ns 55 % Sinewave 2.00 Output Load dBm 50 Ω 75 ºC Alan Variance See Stability Options 0º C to +50ºC ±50.00 ppb Default Spec. -20º C to +70ºC ±200.00 ppb Option “E” -40º C to +75ºC ±500.00 ppb Option “F” ±50.00 ppb ±500.00 ppb Power Consumption @ turn on 2.00 Watts Power Consumption Steady State 1.00 Watt 3.46 Volts Yearly ±500 ppb 10-Years ±3.00 ppm Short Term Stability Operable Temperature Range 1x10 -9 -40 /second Frequency Stability Options Frequency Stability vs. Supply Voltage (Vdd ± 5%) Warm-Up @ 25 ºC Supply Voltage (Vdd) 3.13 3.30 In < 3-minutes See Options Aging ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.01.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY1 Series Pb RoHS Compliant 20.8 x 13.2 x 8.2 mm | | | | | | | | | | | | | | | STANDARD SPECIFICATIONS - continued. Parameters Minimum Typical Maximum Supply Voltage Variation Spectral Content Spurious Response Units ±50 ppb -35 dBc Notes VDD ± 5% change Phase Noise (10MHz Carrier) @ 5V @ 10 Hz offset -90 dBc / Hz @ 100 Hz offset -120 dBc / Hz @ 1,000 Hz offset -145 dBc / Hz @ 10,000 Hz offset -150 dBc / Hz Vdd Volts Electrical Frequency Adjustment Control Voltage Range (Vc) 0.0 Frequency Pull Range ±5.00 ppm Frequency Pull Slope Positive Control Voltage Port Impedance 10 (Vdd/2) 0.5 Center Control Voltage kΩ Vdd/2 Control Port Linearity (Vdd/2) +0.5 ±10 Storage Temperature Volts % -40 +100 ºC OPTIONS AND PART IDENTIFICATION (Left blank if standard) AOCJY1 - - Supply Voltage Option Blank 3.30V A 5.00V Frequency in MHz Such as; 10.000 MHz 26.000 MHz 100.000 MHz ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE MHz - - Temperature Options E -20°C to +70°C F -40°C to +75°C RF Output Options Blank CMOS SW Sinewave Revised: 12.01.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com . Visit www.abracon.com for Terms & Conditions of Sale OVEN CONTROLLED CRYSTAL OSCILLATOR AOCJY1 Series Pb RoHS Compliant 20.8 x 13.2 x 8.2 mm | | | | | | | | | | | | | | | OUTLINE DIMENSIONS 7.80 Max Pin 1 PACKAGING:(50) units per tray Function 7 Control Voltage GND 8 Output 14 Power Supply REFLOW PROFILE: TS max to TL (Ramp-up Rate) 3°C/second max. Preheat Temperature Min. (TS Min.) 150°C Temperature Typical (T S Typ.) 175°C Temperature Max. (TS Max.) 200°C Time (tS) 60 ~ 180 seconds Ramp-up rate (TL to Tp ) 3°C/second max. Time Maintained Above: --Temperature (TL)/Time (TL) 217°C/60 ~ 150 seconds Peak Temperature (Tp) 250°C max. for 10 seconds Target Peak Temperature (Tp Target) 250°C +0/-5°C Time within 5°C of actual peak (tp) 20 ~ 40 seconds Ramp-down Rate 6°C/second max. Tune 25°C to Peak Temperature (t) 8 minutes max. ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS IS ABRACON ISO9001:2008 CERTIFIED RTIFIED CE Visit www.abracon.com for Terms & Conditions of Sale Revised: 12.01.10 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com .