NOTES: 1. 2. REVISIONS THIRD ANGLE PROJ. REV MATERIALS AND FINISHES: BODY AND BAYONET SLEEVE - BRASS, NICKEL PLATING OUTER CONTACT - BeCu, NICKEL PLATING CONTACT - PHOSPHOR BRONZE, GOLD PLATING FERRULE - COPPER, NICKEL PLATING INSULATOR - PTFE ELECTRICAL: A. IMPEDANCE: 75 OHM B. FREQUENCY RANGE: DC - 3 GHz C. RETURN LOSS: 30 dB MIN. D. DIELECTRIC WITHSTANDING VOLTAGE: E. INSULATION RESISTANCE: 10,000 M DESCRIPTION 1 1,95 [0.077 ] DIELECTRIC PROTOTYPE RELEASE DATE ECO APPR 19-May-10 -- AAP 8,35 [0.329 ] BRAID & FOIL 3,96 [0.156 ] 1000 VRMS, MIN. MIN SCALE 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 C TO +165 C STUD LOCATING AND INSTALLATION/ REMOVAL TOOL GROOVES 4. ENVIRONMENTAL: A. THERMAL SHOCK PER MIL-STD-202 METHOD 107 TEST CONDITION B (EXCEPT HIGH TEMP @200 C) B. VIBRATION: MIL-STD-202 METHOD 204 TEST CONDITION B C. SHOCK: MIL-STD-202 METHOD 213 TEST CONDITION B D. CORROSION: MIL-STD-202 METHOD 101 TEST CONDITION B 5% SALT SOLUTION 5. 3.000 SCALE 5.000 RECOMMENDED CABLE STRIPPING DIMENSIONS PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED: "AMPHENOLRF, 34-1033 DATE CODE" 6. HIGH DENSITY INSTALLATION/REMOVAL TOOL: 227-T2000 32,64 REF [1.285 ] 7. CABLE ASSEMBLY INSTRUCTIONS: A. TRIM CABLE AS SHOWN. B. CRIMP CONTACT TO CABLE CENTER CONDUCTOR WITH .042" SQUARE DIE C. CRIMP FERRULE WITH 0.213" HEX. 6,80 REF [0.268 ] 8. SHOWS CABLE ENTRY DIMENSIONS. 8 5,60 [0.220 ] 8 3,70 [0.146 ] 7,75 REF [0.305 ] 6,35 [0.250 ] 8 7,00 REF [0.276 ] PRELIMINARY ISSUE 0,80 [0.032 ] CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: <0.5mm 0.5 - 6mm 6 - 30mm 30 - 120mm ANGLES 0.05mm 0.1mm 0.3mm 0.2mm 1 NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon requiest; and (3) arre confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the funishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implicatioin or otherwise in any manner licensing, granting rights to permitting such holder or any other sperson to manufacture, use or sell any product, process or design, patented or otherwsie, that may in any way be related to or disclosed by said drawings, specifications, or other data. MATERIAL SEE NOTES REFERENCE EAR # 4068 CONFIGURATION LEVEL: Prototype FINISH DRAWN A ARUN PRABU DATE 19-May-10 ENGINEER A ARUN PRABU DATE 19-May-10 APPROVED DATE TITLE HD-BNC STR PLUG FOR TFC HD 210 SCALE: 7.9:1.0 CAD FILE Root Folder/HD-BNC /34-1033 SHEET Amphenol RF Danbury CT USA, Tainan, Taiwan, Shenzhen, China www.amphenolrf.com DRAWING NO. 34-1033 2 OF 2 DWG SIZE REV B 1 ITEM NO. 34-1033 PART NO. 34-1033