ASSMANN HMM25H

53.04
47.04
38.96
33.24
Cover
30.48
Strain Relief
Without Insulator Support
Material:
• Insulator: Glass-Filled Thermoplastic PBT, UL94V-0
• Contact: Copper alloy
• Shell: Steel, 100” Tin Over 50” min Copper
*Important is that the min mating cycles D-subs must have are 1,000
Electrical:
• Contact Resistance: 20M Max. @1Amp DC
• Insulation Resistance: 1,000M @500V DC
• Dielectric Withstanding Voltage: 1,000V AC/rms 60Hz for 1 Min.
• Current Rating: 3 Amp
• Voltage Rating: 250V AC/rms 60Hz
Unit: MM±0.25MM
ITEM NO.
RoHS
Compliant
A-DSF25LPXX-III-R
TITLE
Flat Ribbon Cable D-Sub Assembly - 25Pin, Male,
Low Profile
ASSMANN
Electronics, Inc.
1840 W. Drake Drive, Suite 101 • Tempe, AZ 85283
Toll Free: 1-877-277-6266 • Email: [email protected]
THIS DRAWING IS UNPUBLISHED
©Copyright 2010 by Assmann Electronic Components
All International Rights Reserved