Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 105 Polysnap ® With over 26,000 combinations Bulgin’s Polysnap mains power inlet modules offer a very adaptable and flexible solution to panel design. Polysnap allow combinations of mains inlets and outlets, filtered inlets, switches, fuseholders, voltage selectors and indicators mounted in either horizontal or vertical format bezels ready for quick snap-fit assembly. The compact design occupies the minimum of panel area and a single rectangular mounting hole, offering easy installation for this mains power entry module. To complement Polysnap the Polyflange range offers a flange fixing alternative for designers who prefer the security of screw fixing. IEC CONNECTORS All types and variations are available through Bulgin’s extensive distribution network. Type Page BZV Series 108-116 BZH Series 117-121 BZM Series 122 BVA & BVB Series 123-124 Filter Options 125-129 www.elektron-bulgin.com 105 Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 106 POLYSNAP® POWER INLET MODULES Components used in Polysnap® and Polyflange Power Inlet Modules Note: Components are Approved Individually (where applicable). Please see individual component pages for full specifications. IEC CONNECTORS, FUSEHOLDERS AND VOLTAGE SELECTORS Type Description Rating Approvals DX0928 Neon Indicator 110V or 250V a.c./d.c. working FX0359 5 x 20mm Fuseholder Max. rating 10A. 250V See Page 150 PF0011 C14 Power Inlet with Integral 5 x 20mm Fuseholder Max. rating 10A. 250V a.c. See Page 81 PF0033 C14 Power Inlet with Integral twin 5 x 20mm Fuseholder Max. rating 10A. 250V a.c. See Page 82 PX0575 C14 Power Inlet, Cold condition Max. rating 10A. 250V a.c. See Page 77 PX0595 C16 Power Inlet, Hot Condition Max. rating 10A. 250V a.c. See Page 83 PX0695 Sheet F Power Outlet Max. rating 10A. 250V a.c. See Page 90 PX0783 Sheet F Shuttered Power Outlet Max. rating 10A. 250V a.c. See Page 91 PX0598 C20 Power Inlet Max. rating 16A, 250V a.c. See Page 93 VS0001 Voltage Selector marked 120/240V Max. rating 6.3A. 120/240V a.c. See Page 196 IEC CONNECTORS SWITCHES, INDICATORS AND CIRCUIT BREAKERS No Poles Single Pole Double Pole Illumination Current Ratings Circuit Approvals Non-illuminated Max. rating 16A Resistive, 4A Inductive, 250Vac. High Inrush Max. rating 16A Resistive, 4A Inductive, 250Vac. Inrush current, 150A to IEC65. 1 Illuminated Max. rating 16A Resistive, 4A Inductive, 250Vac. 1 Non-illuminated Max. rating 16A Resistive, 4A Inductive, 250Vac. High Inrush Max. rating 16A Resistive, 4A Inductive, 250Vac. Inrush current, 150A to IEC65. 1 4 Illuminated Max. rating 16A Resistive, 4A Inductive, 250Vac. 250Vac Neon. 4 Non-illuminated Max. rating 10A Resistive, 4A Inductive, 250Vac. 1a 2a Illuminated Max. rating 10A Resistive, 4A Inductive, 250Vac. 250Vac Neon. 1a 2a 3b Non-illuminated Max. rating 10A Resistive, 4A Inductive, 250Vac. 1 4 2 High Inrush Max. rating 10A Resistive, 4A Inductive, 250Vac. Inrush current, 85A to EN61058-1. 1a 2a 3b 4b Max. rating 10A Resistive, 4A Inductive, 250Vac. 250Vac Neon. 4 250Vac neon lamp connected internally to terminals. 1 1 2 3 2 2 5 2 5 For Mini Bezel: Single Pole Double Pole Illuminated Indicator RoHS 1 5 2 5 3 Polysnap and Polyflange range and all components are compliant 106 www.elektron-bulgin.com Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 107 POLYSNAP® POWER INLET MODULES OVERVIEW OF POLYSNAP MODULES INLETS Style Snap to Panel Vertical C14 C14 Fused C16 C20 OUTLETS Sheet F With SP switch Page 110 With SP switch Page 108 With SP switch Page 110 With SP switch Page 114 With SP switch Page 116 INLET/OUTLET COMBINATIONS C14 C14 Fused With DP Switch Page 109 Snap to Panel Horizontal With other components Pages 111, 112, 113 With SP switch Page 117 With DP Switch Page 118 Mini Bezel With SP Switch Page 122 With other components Page 115 With SP switch Page 119 With DP switch Page 120 No additional components Page 121 Mini Bezel With DP Switch Page 122 Flange Mount Vertical With SP switch Page 123 With DP switch Page 124 www.elektron-bulgin.com 107 IEC CONNECTORS With other components Pages 111, 112, 113 Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 108 C14 IEC Fused Inlet - Vertical VERTICAL MODULE ARRANGEMENT ᔢ Fused Inlet with 2.8mm or 6.3mm tags ᔢ Single Pole Switch Variations ᔢ Filtered Inlet Option ᔢ Options of I/O marked switches BZV01/Z0000/01 How to Order Type of Inlet / Outlet Filtered or Non Filtered Inlet Combination of Other Components Single Fused C14 Power Inlet (cold condition), 6.3 or 2.8mm tabs: Z0000 = Non Filtered Single Pole Switch: Axxxx = Standard 01 = S.P. Switch 01 = PF0011/63 02 = PF0011/28 IEC CONNECTORS BZV xx / xxxxx / xx Bxxxx = Medical (Twin Fuse Version only) Single Pole Neon Switch: Twin Fused C14 Power Inlet (cold condition), 6.3 or 2.8mm tabs: 02 = S.P. Red Neon Switch 08 = S.P. Green Neon Switch 15 = PF0033/63 16 = PF0033/28 Neon Indicator: 03 = Red Neon Indicator Single Pole High Inrush Switch: 46 = S.P. High Inrush Switch For Filtered inlet use 6th to 9th characters from filter Single Pole Switch Marked I/O: ordering code see pages 127-129. 69 = S.P. Switch (I/O) E.g. BZV01/A0620/01 Single Pole Neon Switch Marked (I/O): 71 = S.P. Red Neon Switch (I/O) 74 = S.P. Green Neon Switch (I/O) Single Pole High Inrush Switch Marked (I/O): 98 = S.P. High Inrush Switch (I/O) Note: For technical details of individual components please see page 106 108 www.elektron-bulgin.com Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 109 C14 IEC Fused Inlet - Vertical VERTICAL MODULE ARRANGEMENT ᔢ Fused Inlet with 2.8mm or 6.3mm tags ᔢ Double Pole Switch or Indicator Variations ᔢ Filtered Inlet Option ᔢ Options of I/O marked switches BZV01/Z0000/10 How to Order BZV xx / xxxxx / xx Type of Inlet / Outlet Filtered or Non Filtered Inlet Combination of Other Components Single Fused C14 Power Inlet (cold condition), 6.3 or 2.8mm tabs: Z0000 = Non Filtered Neon Indicator: Axxxx = Standard D3 = Red Neon Indicator Bxxxx = Medical (Twin Fuse Version only) Double Pole Switch: 10 = D.P. Switch Twin Fused C14 Power Inlet (cold condition), 6.3 or 2.8mm tabs: IEC CONNECTORS 01 = PF0011/63 02 = PF0011/28 Double Pole Neon Switch: 15 = PF0033/63 16 = PF0033/28 11 = D.P. Red Neon Switch 12 = D.P. Green Neon Switch Double Pole High Inrush Switch: 13 = D.P. High Inrush Switch For Filtered inlet use 6th to 9th characters from filter ordering code see pages 127-129. E.g. BZV01/A0620/10 Double Pole Switch Marked I/O: 70 = D.P. Switch (I/O) Double Pole Neon Switch Marked (I/O): 76 = D.P. Red Neon Switch (I/O) 77 = D.P. Green Neon Switch (I/O) Double Pole High Inrush Switch Marked (I/O): 78 = D.P. High Inrush Switch (I/O) B1 = D.P. High Inrush Green Neon Switch (I/O) Note: For technical details of individual components please see page 106 www.elektron-bulgin.com 109 Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 110 POLYSNAP® POWER INLET MODULES C14 and C16 IEC Inlet - Vertical VERTICAL MODULE ARRANGEMENT BZV03/Z0000/02 How to Order BZV xx / xxxxx / xx Type of Inlet / Outlet Filtered or Non Filtered Inlet Combination of Other Components C14 Power Inlet (cold condition), 6.3 or 2.8mm tabs: Z0000 = Non Filtered Single Pole Switch: Axxxx = Standard 01 = S.P. Switch 03 = PX0575/63 04 = PX0575/28 IEC CONNECTORS ᔢ Inlet with 2.8mm or 6.3mm tags ᔢ Single Pole Switch or Neon Indicator Variations ᔢ Filtered Inlet Option ᔢ Options of I/O marked switches ᔢ Non Fused Bxxxx = Medical Single Pole Neon Switch: 02 = S.P. Red Neon Switch 08 = S.P. Green Neon Switch C16 Power Inlet (hot condition), 6.3 or 2.8mm tabs: 05 = PX0595/63 06 = PX0595/28 Neon Indicator: 03 = Red Neon Indicator Single Pole High Inrush Switch: Please note type 05 and 06 are not available in filtered version 46 = S.P. High Inrush Switch For Filtered inlet use 6th to 9th characters from filter ordering code see pages 125-126. E.g. BZV03/A0120/02 Single Pole Switch Marked I/O: 69 = S.P. Switch (I/O) Single Pole Neon Switch Marked (I/O): 71 = S.P. Red Neon Switch (I/O) 74 = S.P. Green Neon Switch (I/O) Single Pole High Inrush Switch Marked (I/O): 98 = S.P. High Inrush Switch (I/O) Note: For technical details of individual components please see page 106 110 www.elektron-bulgin.com Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 111 POLYSNAP® POWER INLET MODULES C14 and C16 IEC Inlet - Vertical VERTICAL MODULE ARRANGEMENT BZV03/Z0000/07 ᔢ Inlet with 2.8mm or 6.3mm tags ᔢ Double Pole Switch/ Fuseholder/Indicator/ Voltage Selectors/ Blanking Plate ᔢ Filtered Inlet Option ᔢ Options of I/O marked switches How to Order BZV xx / xxxxx / xx Filtered or Non Filtered Inlet C14 Power Inlet (cold condition), 6.3 or 2.8mm tabs: Z0000 = Non Filtered 03 = PX0575/63 04 = PX0575/28 Bxxxx = Medical Axxxx = Standard C16 Power Inlet (hot condition), 6.3 or 2.8mm tabs: 05 = PX0595/63 06 = PX0595/28 Combination of Other Components Twin Fuseholder and Double Pole Switch: 05 = 2 x FX0359 + D.P. Switch Twin Fuseholder and Double Pole Neon Switch: 06 = 2 x FX0359 + D.P. Red Neon Switch 09 = 2 x FX0359 + D.P. Green Neon Switch 19 = 2 x FX0359 + D.P. Red Neon Switch 125V Twin Fuseholder and Neon Indicator: 07 = 2 x FX0359 + Red Neon Indicator Please note type 05 and 06 are not available in filtered version For Filtered inlet use 6th to 9th characters from filter ordering code see pages 125-126. E.g. BZV03/A0120/07 Voltage Selector, Fuseholder and Double Pole Switch: 15 = 1 x VS0001 + 1 x FX0359 + Double Pole switch Voltage Selector, Fuseholder and Double Pole Neon Switch: 16 = 1 x VS0001 + 1 x FX0359 + D.P. Red Neon Switch 18 = 1 x VS0001 + 1 x FX0359 + D.P. Green Neon Switch Voltage Selector, Fuseholder and Neon Indicator: 17 = 1 x VS0001 + 1 x FX0359 + Red Neon Indicator Twin Fuseholder and Double Pole High Inrush Switch: 20 = 2 x FX0359 + D.P. High Inrush Switch Twin Fuseholder and Double Pole High Inrush Neon Switch: 21 = 2 x FX0359 + 1 x D.P. High Inrush Green Neon Switch 22 = 2 x FX0359 + 1 x D.P. High Inrush Red Neon Switch Voltage Selector, Neon Indicator and Double Pole Switch 25 = 1 x VS0001 + 1 x DX0928/110V/Red + D.P. Switch 26 = 1 x VS0001 + 1 x DX0928/110V/Green + D.P. Switch 27 = 1 x VS0001 + 1 x DX0928/250V/Red + D.P. Switch 28 = 1 x VS0001 + 1 x DX0928/250V/Green + D.P. Switch Voltage Selector, Neon Indicator and Double Pole High Inrush Switch: 29 = 1 x VS0001 + 1 x DX0928/250V/Red + D.P. High Inrush Switch 30 = 1 x VS0001 + 1 x DX0928/250V/Green + D.P. High Inrush Switch Fuseholder, Neon Indicator and Double Pole Switch 31 = 1 x FX0359 + 1 x DX0928/110V/Red + D.P. Switch 32 = 1 x FX0359 + 1 x DX0928/110V/Green + D.P. Switch 33 = 1 x FX0359 + 1 x DX0928/250V/Red + D.P. Switch 34 = 1 x Fx0359 + 1 x DX0928/250V/Green + D.P. Switch Fuseholder, Neon Indicator and Double Pole High Inrush Switch: 35 = 1 x FX0359 + 1 x DX0928/250V/Red + D.P. High Inrush Switch 36 = 1 x FX0359 + 1 x DX0928/250V/Green + D.P. High Inrush Switch Fuseholder, Blanking Plate and Double Pole High Inrush Neon Switch: 47 = 1 x FX0359 + 1 x Blanking Plate (Right) + D.P. High Inrush Green Neon Switch Fuseholder, Blanking Plate and Double Pole Switch: 48 = 1 x FX0359 + 1 x Blanking Plate (Right) + D.P. Switch www.elektron-bulgin.com 111 IEC CONNECTORS Type of Inlet / Outlet Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 112 POLYSNAP® POWER INLET MODULES C14 and C16 IEC Inlet - Vertical VERTICAL MODULE ARRANGEMENT BZV03/Z0000/07 ᔢ Inlet with 2.8mm or 6.3mm tags ᔢ Double Pole Switch/ Fuseholder/Indicator/ Voltage Selectors/ Blanking Plate ᔢ Filtered Inlet Option ᔢ Options of I/O marked switches IEC CONNECTORS How to Order BZV xx / xxxxx / xx Type of Inlet / Outlet Filtered or Non Filtered Inlet C14 Power Inlet (cold condition), 6.3 or 2.8mm tabs: Z0000 = Non Filtered 03 = PX0575/63 04 = PX0575/28 Bxxxx = Medical Axxxx = Standard C16 Power Inlet (hot condition), 6.3 or 2.8mm tabs: 05 = PX0595/63 06 = PX0595/28 Combination of Other Components Twin Fuseholder and Double Pole Switch Marked (I/O): 72 = 2 x FX0359 + D.P. Switch (I/O) Twin Fuseholder and Double Pole Neon Switch Marked (I/O): 73 = 2 x FX0359 + D.P. Red Neon Switch (I/O) 75 = 2 x FX0359 + D.P. Green Neon Switch(I/O) 82 = 2 x FX0359 + D.P. Red Neon Switch 125V(I/O) Voltage Selector, Fuseholder and Double Pole Switch Marked (I/O): 79 = 1 x VS0001 + 1 x FX0359 + Double Pole switch (I/O) Please note type 05 and 06 are not available in filtered version For Filtered inlet use 6th to 9th characters from filter ordering code see pages 125-126. E.g. BZV03/A0120/07 Voltage Selector, Fuseholder and Double Pole Neon Switch Marked (I/O): 80 = 1 x VS0001 + 1 x FX0359 + D.P. Red Neon Switch (I/O) 81 = 1 x VS0001 + 1 x FX0359 + D.P. Green Neon Switch (I/O) Twin Fuseholder and Double Pole High Inrush Switch Marked (I/O): 83 = 2 x FX0359 + D.P. High Inrush Switch (I/O) Twin Fuseholder and Double Pole High Inrush Neon Switch Marked (I/O): 84 = 2 x FX0359 + 1 x D.P. High Inrush Green Neon Switch (I/O) 85 = 2 x FX0359 + 1 x D.P. High Inrush Red Neon Switch (I/O) Voltage Selector, Neon Indicator and Double Pole Switch Marked (I/O): 86 = 1 x VS0001 + 1 x DX0928/110V/Red + D.P. Switch (I/O) 87 = 1 x VS0001 + 1 x DX0928/110V/Green + D.P. Switch (I/O) 88 = 1 x VS0001 + 1 x DX0928/250V/Red + D.P. Switch (I/O) 89 = 1 x VS0001 + 1 x DX0928/250V/Green + D.P. Switch (I/O) 112 Voltage Selector, Neon Indicator and Double Pole High Inrush Switch Marked (I/O): 90 = 1 x VS0001 + 1 x DX0928/250V/Red + D.P. High Inrush Switch(I/O) 91 = 1 x VS0001 + 1 x DX0928/250V/Green + D.P. High Inrush Switch(I/O) Fuseholder, Neon Indicator and Double Pole Switch Marked (I/O) 92 = 1 x FX0359 + 1 x DX0928/110V/Red + D.P. Switch (I/O) 93 = 1 x FX0359 + 1 x DX0928/110V/Green + D.P. Switch (I/O) 94 = 1 x FX0359 + 1 x DX0928/250V/Red + D.P. Switch (I/O) 95 = 1 x FX0359 + 1 x DX0928/250V/Green + D.P. Switch (I/O) Fuseholder, Neon Indicator and Double Pole High Inrush Switch Marked (I/O): 96 = 1 x FX0359 + 1 x DX0928/250V/Red + D.P. High Inrush Switch (I/O) 97 = 1 x FX0359 + 1 x DX0928/250V/Green + D.P. High Inrush Switch (I/O) Fuseholder, Blanking Plate and Double Pole High Inrush Neon Switch Marked (I/O): 99 = 1 x FX0359 + 1 x Blanking Plate (Right) + D.P. High Inrush Green Neon Switch (I/O) Fuseholder, Blanking Plate and Double Pole Switch Marked (I/O): A0 = 1 x FX0359 + 1 x Blanking Plate (Right) + D.P. Switch (I/O) B2 = 1 x VS0002 + 1 x Blanking Plate B3 = 1 x FX0359 + 1 x Blanking Plate + D.P. High Inrush Switch (I/O) www.elektron-bulgin.com Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 113 POLYSNAP® POWER INLET MODULES C14 and C16 IEC Inlet - Vertical VERTICAL MODULE ARRANGEMENT ᔢ Inlet with 2.8mm or 6.3mm tags ᔢ Fuseholder/Voltage Selector/Indicator options/Blanking plate ᔢ Filtered Inlet Option BZV04/Z0000/04 BZV xx / xxxxx / xx Type of Inlet / Outlet Filtered or Non Filtered Inlet Combination of Other Components C14 Power Inlet (cold condition), 6.3 or 2.8mm tabs: Z0000 = Non Filtered Twin Fuseholder: Axxxx = Standard 04 = 2 x FX0359 03 = PX0575/63 04 = PX0575/28 Bxxxx = Medical Voltage Selector and Fuseholder: 14 = 1 x VS0001 + 1 x FX0359 C16 Power Inlet (hot condition), 6.3 or 2.8mm tabs: Voltage selector and Neon: 05 = PX0595/63 06 = PX0595/28 37 38 39 40 Please note type 05 and 06 are not available in filtered version = = = = 1 1 1 1 x x x x VS0001 VS0001 VS0001 VS0001 + + + + DX0928/110V/Red DX0928/110V/Green DX0928/250V/Red DX0928/250V/Green Fuseholder and Neon: For Filtered inlet use 6th to 9th characters from filter ordering code see pages 125-126. E.g. BZV04/A0120/04 41 42 43 44 = = = = 1 1 1 1 x x x x FX0359 FX0359 FX0359 FX0359 + + + + DX0928/110V/Red DX0928/110V/Green DX0928/250V/Red DX0928/250V/Green Fuseholder and Blanking Plate: 45 = 1 x FX0359 + Blanking Plate Voltage Selector and Blanking Plate: B2 = 1 x VS0001 + Blanking Plate Note: For technical details of individual components please see page 106 www.elektron-bulgin.com 113 IEC CONNECTORS How to Order Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 114 POLYSNAP® POWER INLET MODULES C20 IEC Inlet - Vertical VERTICAL MODULE ARRANGEMENT BZV49/Z0000/69 How to Order ᔢ Inlet with 4.8mm or 6.3mm tags ᔢ Single Pole Switch marked I/O ᔢ Illuminated, red or green, switches ᔢ High inrush non-illuminated switch Panel Thickness: 1.0, 1.5, 2.0, 3.0mm. BZV xx / xxxxx / xx Type of Inlet Filtered or Non Filtered Inlet Combination of Other Components C20 Power Inlet (cold condition), 4.8 or 6.3mm tabs: Z0000 = Non Filtered Single Pole Switch: 49 = PX0598/63 50 = PX0598/48 01 = S.P. Switch Single Pole Switch Marked (I/O): IEC CONNECTORS 69 = S.P. Switch (I/O) Single Pole Illuminated Switch: 02 = S.P. Illuminated Red 08 = S.P. Illuminated Green Single Pole Non-illuminated High Inrush Switch Marked I/O: 98 = S.P. High Inrush Switch (I/O) Single Pole Illuminated (Red or Green 250v Neon) Switch Marked I/O: 71 = S.P. Switch Illuminated Red (I/O) 74 = S.P. Switch Illuminated Green (I/O) Note: For technical details of individual components please see page 106 114 www.elektron-bulgin.com Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 115 POLYSNAP® POWER INLET MODULES C14 IEC Inlet/Sheet F IEC Outlet - Vertical VERTICAL MODULE ARRANGEMENT ᔢ Inlet/Outlet Combination ᔢ 2.8mm or 6.3mm tags ᔢ Filtered Inlet and Blanking Plate options ᔢ Shuttered or Non-shuttered Outlet ᔢ Fused BZV09/Z0000/04 BZV xx / xxxxx / xx Type of Inlet / Outlet Filtered or Non Filtered Inlet Combination of Other Components C14 Power Inlet (cold condition) and Sheet F Non-shuttered Power Outlet, 2.8 or 6.3mm tabs: Z0000 = Non Filtered Twin Fuseholder: Axxxx = Standard 04 = 2 x FX0359 09 = PX0575/63 + PX0695/63 10 = PX0575/28 + PX0695/28 Bxxxx = Medical Voltage Selector and Fuseholder: 14 = 1 x VS0001 + 1 x FX0359 C14 Power Inlet (cold condition) and Sheet F Shuttered Power Outlet, 2.8 or 6.3mm tabs: Voltage selector and Neon: 17 = PX0575/63 + PX0783/63 18 = PX0575/28 + PX0783/28 37 38 39 40 For Filtered inlet use 6th to 9th characters from filter ordering code see pages 125-126. E.g. BZV09/A0120/04 = = = = 1 1 1 1 x x x x VS0001 VS0001 VS0001 VS0001 + + + + DX0928/110V/Red DX0928/110V/Green DX0928/250V/Red DX0928/250V/Green Fuseholder and Neon: 41 42 43 44 = = = = 1 1 1 1 x x x x FX0359 FX0359 FX0359 FX0359 + + + + DX0928/110V/Red DX0928/110V/Green DX0928/250V/Red DX0928/250V/Green Fuseholder and Blanking Plate: 45 = 1 x FX0359 + Blanking Plate Voltage Selector and Blanking Plate: B2 = 1 x VS0001 + Blanking Plate Note: For technical details of individual components please see page 106 www.elektron-bulgin.com 115 IEC CONNECTORS How to Order Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 116 POLYSNAP® POWER INLET MODULES Sheet F IEC Outlet - Vertical VERTICAL MODULE ARRANGEMENT ᔢ Outlet with 2.8mm or 6.3mm tags ᔢ Shuttered or Non-Shuttered ᔢ Single Pole Switch or Neon Indicator ᔢ I/O Marking Options Panel Thickness: 1.0, 1.5, 2.0, 3.0mm. BZV45/Z0000/02 How to Order BZV xx / xxxxx / xx Type of Outlet Non Filtered Outlet Combination of Other Components Sheet F Power Outlet (non shuttered), 6.3 or 2.8mm tabs: Z0000 = Non Filtered Single Pole Switch: IEC CONNECTORS 45 = PX0695/63 46 = PX0695/28 Sheet F Power Outlet (shuttered), 6.3 or 2.8mm tabs: 47 = PX0783/63 48 = PX0783/28 01 = S.P. Switch Single Pole Neon Switch: 02 = S.P. Red Neon Switch 08 = S.P. Green Neon Switch Neon Indicator: 03 = Red Neon Indicator Single Pole High Inrush Switch: 46 = S.P. High Inrush Switch Single Pole Switch Marked I/O: 69 = S.P. Switch (I/O) Single Pole Neon Switch Marked (I/O): 71 = S.P. Red Neon Switch (I/O) 74 = S.P. Green Neon Switch (I/O) Single Pole High Inrush Switch Marked (I/O): 98 = S.P. High Inrush Switch (I/O) Note: For technical details of individual components please see page 106 116 www.elektron-bulgin.com Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 117 POLYSNAP® POWER INLET MODULES C14 IEC Fused Inlet - Horizontal HORIZONTAL MODULE ARRANGEMENT ᔢ Fused Inlet with 2.8mm or 6.3mm tags ᔢ Single Pole Switch Variations ᔢ Filtered Inlet Option ᔢ Options of I/O marked switches BZH01/Z0000/01 How to Order BZH xx / xxxxx / xx Type of Inlet / Outlet Filtered or Non Filtered Inlet Combination of Other Components Single Fused C14 Power Inlet (cold condition), 2.8 or 6.3mm tabs: Z0000 = Non Filtered Single Pole Switch: Axxxx = Standard 01 = S.P. Switch Bxxxx = Medical (Twin Fuse Version only) Single Pole Neon Switch: 02 = S.P. Red Neon Switch 08 = S.P. Green Neon Switch Twin Fused C14 Power Inlet (cold condition), 2.8 or 6.3mm tabs: 15 = PF0033/63 16 = PF0033/28 IEC CONNECTORS 01 = PF0011/63 02 = PF0011/28 Neon Indicator: 03 = Red Neon Indicator Single Pole High Inrush Switch: 46 = S.P. High Inrush Switch For Filtered inlet use 6th to 9th characters from filter ordering code see pages 127-129. E.g. BZH01/A0620/01 Single Pole Switch Marked I/O: 69 = S.P. Switch (I/O) Single Pole Neon Switch Marked (I/O): 71 = S.P. Red Neon Switch (I/O) 74 = S.P. Green Neon Switch (I/O) Single Pole High Inrush Switch Marked (I/O): 98 = S.P. High Inrush Switch (I/O) Note: For technical details of individual components please see page 106 www.elektron-bulgin.com 117 Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 118 POLYSNAP® POWER INLET MODULES C14 IEC Fused Inlet - Horizontal HORIZONTAL MODULE ARRANGEMENT ᔢ Fused Inlet with 2.8mm or 6.3mm tags ᔢ Double Pole Switch Variations ᔢ Filtered Inlet Option ᔢ Options of I/O marked switches BZH01/Z0000/10 How to Order Type of Inlet / Outlet Filtered or Non Filtered Inlet Combination of Other Components Single Fused C14 Power Inlet (cold condition), 2.8 or 6.3mm tabs: Z0000 = Non Filtered Neon Indicator: Axxxx = Standard 03 = Red Neon Indicator 01 = PF0011/63 02 = PF0011/28 IEC CONNECTORS BZH xx / xxxxx / xx Bxxxx = Medical (Twin Fuse Version only) Double Pole Switch: 10 = D.P. Switch Twin Fused C14 Power Inlet (cold condition), 2.8 or 6.3mm tabs: Double Pole Neon Switch: 15 = PF0033/63 16 = PF0033/28 11 = D.P. Red Neon Switch 12 = D.P. Green Neon Switch Double Pole High Inrush Switch: 13 = D.P. High Inrush Switch For Filtered inlet use 6th to 9th characters from filter ordering code see pages 127-129. E.g. BZH01/A0620/10 Double Pole Switch marked I/O: 70 = D.P. Switch (I/O) Double Pole Neon Switch Marked (I/O): 76 = D.P. Red Neon Switch (I/O) 77 = D.P. Green Neon Switch (I/O) Double Pole High Inrush Switch Marked (I/O): 78 = D.P. High Inrush Switch (I/O) B1 = D.P. High Inrush Green Neon Switch (I/O) Note: For technical details of individual components please see page 106 118 www.elektron-bulgin.com Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 119 POLYSNAP® POWER INLET MODULES C14 IEC Inlet/Sheet F IEC Outlet - Horizontal HORIZONTAL MODULE ARRANGEMENT BZH09/Z0000/01 How to Order ᔢ Inlet/Outlet Combination with 2.8mm or 6.3mm tags ᔢ Shuttered or Non-Shuttered Outlet ᔢ Single Pole Switch Variations ᔢ Filtered Inlet Option ᔢ Options of I/O marked switches BZH xx / xxxxx / xx Type of Inlet / Outlet Filtered or Non Filtered Inlet Combination of Other Components C14 Power Inlet (cold condition) and Sheet F Non-shuttered Power Outlet, 2.8 or 6.3mm tabs: Z0000 = Non Filtered Single Pole Switch: Axxxx = Standard 01 = S.P. Switch Bxxxx = Medical Single Pole Neon Switch: 02 = S.P. Red Neon Switch 08 = S.P. Green Neon Switch C14 Power Inlet (cold condition) and Sheet F Shuttered Power Outlet , 2.8 or 6.3mm tabs: 17 = PX0575/63 + PX0783/63 18 = PX0575/28 + PX0783/28 IEC CONNECTORS 09 = PX0575/63 + PX0695/63 10 = PX0575/28 + PX0695/28 Neon Indicator: 03 = Red Neon Indicator Single Pole High Inrush Switch: 46 = S.P. High Inrush Switch For Filtered inlet use 6th to 9th characters from filter ordering code see pages 125-126. E.g. BZH09/A0120/01 Single Pole Switch Marked I/O: 69 = S.P. Switch (I/O) Single Pole Neon Switch Marked (I/O): 71 = S.P. Red Neon Switch (I/O) 74 = S.P. Green Neon Switch (I/O) Single Pole High Inrush Switch Marked (I/O): 98 = S.P. High Inrush Switch (I/O) Note: For technical details of individual components please see page 106 www.elektron-bulgin.com 119 Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 120 POLYSNAP® POWER INLET MODULES C14 IEC Inlet/Sheet F IEC Outlet - Horizontal HORIZONTAL MODULE ARRANGEMENT BZH11/Z0000/10 ᔢ Inlet/Outlet Combination with 2.8mm or 6.3mm tags ᔢ Single or Twin Fused Inlet ᔢ Shuttered or Non-Shuttered Outlet ᔢ Double Pole Switch Variations ᔢ Filtered Inlet Option ᔢ Options of I/O marked switches How to Order Type of Inlet/Outlet Filtered or Non Filtered Inlet Combination of Other Components Single Fused C14 Power Inlet (cold condition) and Sheet F Power Outlet, 2.8 or 6.3mm tabs: Z0000 = Non Filtered Neon Indicator: Axxxx = Standard D3 = Red Neon Indicator 11 = PF0011/63 + PX0695/63 12 = PF0011/28 + PX0695/28 IEC CONNECTORS BZH xx / xxxxx / xx Bxxxx = Medical (Twin Fuse Version only) Double Pole Switch: 10 = D.P. Switch Twin Fused C14 Power Inlet (cold condition) and Sheet F Power Outlet , 2.8 or 6.3mm tabs: Double Pole Neon Switch: 13 = PF0033/63 + PX0695/63 14 = PF0033/28 + PX0695/28 11 = D.P. Red Neon Switch 12 = D.P. Green Neon Switch Single Fused C14 Power Inlet (cold condition) and Sheet F Shuttered Power Outlet, 2.8 or 6.3mm tabs: Double Pole High Inrush Switch: 19 = PF0011/63 + PX0783/63 20 = PF0011/28 + PX0783/28 Twin Fused C14 Power Inlet (cold condition) and Sheet F Shuttered Power Outlet , 2.8 or 6.3mm tabs: 13 = D.P. High Inrush Switch For Filtered inlet use 6th to 9th characters from filter ordering code see pages 127-129. E.g. BZH11/A0620/10 21 = PF0033/63 + PX0783/63 22 = PF0033/28 + PX0783/28 Double Pole Switch Marked I/O: 70 = D.P. Switch (I/O) Double Pole Neon Switch Marked (I/O): 76 = D.P. Red Neon Switch (I/O) 77 = D.P. Green Neon Switch (I/O) Double Pole High Inrush Switch Marked (I/O): 78 = D.P. High Inrush Switch (I/O) B1 = D.P. High Inrush Green Neon Switch (I/O) Note: For technical details of individual components please see page 106 120 www.elektron-bulgin.com Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 121 POLYSNAP® POWER INLET MODULES C14 IEC Fused Inlet/Sheet F IEC Outlet - Horizontal HORIZONTAL MODULE ARRANGEMENT ᔢ Fused Inlet/Outlet Combination with 2.8mm or 6.3mm tags ᔢ Filtered Inlet Option ᔢ Single or Twin Fused BZH11/Z0000/00 How to Order BZH xx / xxxxx / xx Filtered or Non Filtered Inlet Combination of Other Components Single Fused C14 Power Inlet (cold condition) and Sheet F Non-shuttered Power Outlet, 2.8 or 6.3mm tabs: Z0000 = Non Filtered None Axxxx = Standard 00 = None 11 = PF0011/63 + PX0695/63 12 = PF0011/28 + PX0695/28 Bxxxx = Medical (Twin Fuse Version only) IEC CONNECTORS Type of Inlet / Outlet Twin Fused C14 Power Inlet (cold condition) and Sheet F Non-shuttered Power Outlet , 2.8 or 6.3mm tabs: 13 = PF0033/63 + PX0695/63 14 = PF0033/28 + PX0695/28 Single Fused C14 Power Inlet (cold condition) and Sheet F Shuttered Power Outlet, 2.8 or 6.3mm tabs: 19 = PF0011/63 + PX0783/63 20 = PF0011/28 + PX0783/28 Twin Fused C14 Power Inlet (cold condition) and Sheet F Shuttered Power Outlet , 2.8 or 6.3mm tabs: For Filtered inlet use 6th to 9th characters from filter ordering code see pages 127-129. E.g. BZH11/A0620/00 21 = PF0033/63 + PX0783/63 22 = PF0033/28 + PX0783/28 Note: For technical details of individual components please see page 106 www.elektron-bulgin.com 121 Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 122 POLYSNAP® POWER INLET MODULES C14 IEC Inlet - Mini Bezel MINIMUM COMBINED BEZEL SIZE ᔢ Inlet with 2.8, 4.8 or 6.3mm tags ᔢ Horizontal Module Arrangement ᔢ Single and Double Pole Switch Variations ᔢ Filtered Inlet Option BZM27/Z0000/57B How to Order BZM xx / xxxxx / xx x Type of Inlet / Outlet Filtered or Non Filtered Inlet Switch Variation Panel Thickness C14 Power Inlet (cold condition), 6.3, 4.8 & 2.8mm tabs: Z0000 = Non Filtered Single Pole Switch, 4.8mm or solder tab, marked I/O: 53 = S.P. Switch, 4.8mm tab (I/O) 54 = S.P. Switch, solder tab (I/O) 1.0mm = A 27 = PX0575/63 42 = PX0575/48* 28 = PX0575/28 Bxxxx = Medical Single Pole Illuminated Switch, 4.8mm or solder tab: 55 = S.P. Switch Illum. Red, 4.8mm tab 61 = S.P. Switch Illum. Green, 4.8mm tab 56 = S.P. Switch Illum. Red, solder tab 62 = S.P. Switch Illum. Green, solder tab 2.0mm = C Axxxx = Standard *filter option not available 1.5mm = B 3.0mm = D IEC CONNECTORS Double Pole Switch, 4.8mm or solder tab, marked I/O: 57 = D.P. Switch, 4.8mm tab (I/O) 58 = D.P. Switch, solder tab (I/O) Double Pole Illuminated Switch, 4.8mm or solder tab: 59 = D.P. Switch Illum. Red, 4.8mm tab 63 = D.P. Switch Illum. Green, 4.8mm tab 60 = D.P. Switch Illum. Red, solder tab 64 = D.P. Switch Illum. Green, solder tab For Filtered inlet use 6th to 9th characters from filter ordering code see pages 125-126. E.g. BZM27/A0120/57B Double Pole High Inrush, 4.8mm tabs: 65 = D.P. High Inrush Switch, 4.8mm tabs (S.P. format) Double Pole High Inrush, 4.8mm tabs, marked I/O: 68 = D.P. High Inrush Switch, 4.8mm tabs, I/O (S.P. format) Single Pole Illuminated Switch, 4.8mm or solder tab, Marked I/O: A1 = S.P. Switch Illum. Red, 4.8mm tab (I/O) A5 = S.P. Switch Illum. Green, 4.8mm tab (I/O) A2 = S.P. Switch Illum. Red, solder tab (I/O) A6 = S.P. Switch Illum. Green, solder tab (I/O) Double Pole Illuminated Switch, 4.8mm or solder tab, Marked I/O: A3 = D.P. Switch Illum. Red, 4.8mm tab A7 = D.P. Switch Illum. Green, 4.8mm tab A4 = D.P. Switch Illum. Red, solder tab A8 = D.P. Switch Illum. Green, solder tab Note: For technical details of individual components please see please see page 106 Inlet Approvals: 122 www.elektron-bulgin.com Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 123 POLYSNAP® POWER INLET MODULES C14 IEC Fused Inlet - Polyflange VERTICAL MODULE ARRANGEMENT ᔢ Fused Inlet with 2.8mm or 6.3mm tags ᔢ Screw Fixing to Panel ᔢ Single Pole Switch Variations ᔢ Filtered Inlet Option ᔢ Options of I/O marked switches BVA01/Z0000/02 VERTICAL MODULE ARRANGEMENT ᔢ Fused Inlet with 2.8mm or 6.3mm tags ᔢ Screw Fixing to Panel ᔢ Single Pole Switch Variations ᔢ Filtered Inlet Option ᔢ Options of I/O marked switches How to Order BVx xx / xxxxx / xx Flange Type Type of Inlet / Outlet Filtered or Non Filtered Inlet Combination of Other Components A = Top fixing Single Fused C14 Power Inlet (cold condition), 6.3 or 2.8mm tabs: Z0000 = Non Filtered Single Pole Switch: Axxxx = Standard 01 = S.P. Switch 01 = PF0011/63 02 = PF0011/28 Bxxxx = Medical (Twin Fuse Version only) Single Pole Neon Switch: B = Side fixing 02 = S.P. Red Neon Switch 08 = S.P. Green Neon Switch Twin Fused C14 Power Inlet (cold condition), 6.3 or 2.8mm tabs: Neon Indicator: 15 = PF0033/63 16 = PF0033/28 Single Pole High Inrush Switch: 03 = Red Neon Indicator 46 = S.P. High Inrush Switch For Filtered inlet use 6th to 9th characters from filter ordering code see pages 127-129. E.g. BVA01/A0620/01 Single Pole Switch Marked I/O: 69 = S.P. Switch (I/O) Single Pole Neon Switch Marked (I/O): 71 = S.P. Red Neon Switch (I/O) 74 = S.P. Green Neon Switch (I/O) Single Pole High Inrush Switch Marked (I/O): 98 = S.P. High Inrush Switch (I/O) Note: For technical details of individual components please see page 106 www.elektron-bulgin.com 123 IEC CONNECTORS BVB01/Z0000/01 Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:53 Page 124 POLYSNAP® POWER INLET MODULES C14 IEC Fused Inlet - Polyflange VERTICAL MODULE ARRANGEMENT ᔢ Fused Inlet with 2.8mm or 6.3mm tags ᔢ Screw Fixing to Panel ᔢ Double Pole Switch Variations ᔢ Filtered Inlet Option ᔢ Options of I/O marked switches BVA01/Z0000/10 VERTICAL MODULE ARRANGEMENT ᔢ Fused Inlet with 2.8mm or 6.3mm tags ᔢ Screw Fixing to Panel ᔢ Double Pole Switch Variations ᔢ Filtered Inlet Option ᔢ Options of I/O marked switches IEC CONNECTORS BVB01/Z0000/11 How to Order BV x xx / xxxxx / xx Flange Type Type of Inlet / Outlet Filtered or Non Filtered Inlet Combination of Other Components A = Top fixing Fused C14 Power Inlet (cold condition), 6.3 or 2.8mm tabs: Z0000 = Non Filtered Neon Indicator: Axxxx = Standard D3 = Red Neon Indicator Bxxxx = Medical (Twin Fuse Version only) Double Pole Switch: B = Side fixing 01 = PF0011/63 02 = PF0011/28 10 = D.P. Switch Twin Fused C14 Power Inlet (cold condition), 6.3 or 2.8mm tabs: Double Pole Neon Switch: 11 = D.P. Red Neon Switch 12 = D.P. Green Neon Switch 15 = PF0033/63 16 = PF0033/28 Double Pole High Inrush Switch: 13 = D.P. High Inrush Switch For Filtered inlet use 6th to 9th characters from filter ordering code see pages 127-129. E.g. BVA01/A0620/10 Double Pole Switch Marked I/O: 70 = D.P. Switch (I/O) Double Pole Neon Switch Marked (I/O): 76 = D.P. Red Neon Switch (I/O) 77 = D.P. Green Neon Switch (I/O) Double Pole High Inrush Switch Marked (I/O): 78 = D.P. High Inrush Switch (I/O) B1 = D.P. High Inrush Green Neon Switch (I/O) Note: For technical details of individual components please see page 106 124 www.elektron-bulgin.com Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:54 Page 125 POLYSNAP® POWER INLET MODULES C14 IEC Inlet - Standard Filter EMI FILTER OPTIONS ᔢ For Polysnap modules BZV03, BZV04, BZV09, BZV10, BZV17, BZV18, BZH09, BZH10, BZH17, BZH18, BZM27, BZM28 ᔢ PX0575 style IEC inlet ᔢ Using PS01/A style filter ᔢ Standard Attenuation Filter Bxxxx/A xx x x / xx Polysnap Part No. Filter Type Rating L/C Circuit Additional Components Polysnap Part No. From Polysnap Selection A = Standard 01 = 1A 1 = Version 1 0 = None From Polysnap Selection 03 = 3A 2 = Version 2 1 = Bleed (R) Resistor 06 = 6A 3 = Version 3 2 = Surge (VDR) Protection 3 = “R” plus “VDR” Rating Version L1 Cx Cy Part No. Example 1 AMP “ “ 1 2 3 2 x 2.8mH 2 x 10mH 2 x 10mH 1 x 15nF 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 2 x 2.2nF BZV03/A0120/02 = 3 AMP “ “ 1 2 3 2 x 0.75mH 2 x 1.8mH 2 x 1.8mH 1 x 15nF 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 2 x 2.2nF 6 AMP “ “ 1 2 3 2 x 0.3mH 2 x 0.7mH 2 x 0.7mH 1 x 15nF 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 2 x 2.2nF 10 AMP “ “ 1 2 3 2 x 0.17mH 2 x 0.35mH 2 x 0.17mH 1 x 15nF 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 2 x 2.2nF BZV style Polysnap module with PX0575 IEC power inlet, filter rated at 1 amp, L/C circuit version 2 (L1 = 2 x 10mH, Cx = 1 x 15nF, Cy = 2 x 2.2nF), without bleed resistor or surge protection device fitted, 6.3mm tabs and single pole red neon switch. Filter Specification Max. Working Voltage: 250V a.c. 50-400Hz Earth Leakage Current: <0.35mA (250V. 50Hz) Temperature Range: –25ºC to +85ºC Max. Ambient Temp.: (@ Full Load) 40ºC (derate linearly to 0A @ 85ºC) Test Voltage: 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral Approvals: Attenuation Curves: www.elektron-bulgin.com See PS01/A filter, page 132 125 IEC CONNECTORS 10 = 10A Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:54 Page 126 POLYSNAP® POWER INLET MODULES C14 IEC Inlet - Medical Filter EMI FILTER OPTIONS ᔢ For Polysnap modules BZV03, BZV04, BZV09, BZV10, BZV17, BZV18, BZH09, BZH10, BZH17, BZH18, BZM27, BZM28 ᔢ PX0575 style IEC inlet ᔢ Using PS01/B style filter ᔢ Medical Filter Bxxxx/Bxx x x / xx Polysnap Part No. Filter Type Rating L/C Circuit Additional Components Polysnap Part No. From Polysnap Selection B = Medical 01 = 1A 1 = Version 1 0 = None From Polysnap Selection 03 = 3A 2 = Version 2 1 = Bleed (R) Resistor 06 = 6A 3 = Version 3 2 = Surge (VDR) Protection IEC CONNECTORS 10 = 10A 3 = “R” plus “VDR” Rating Version L1 Cx Part No. Example 1 AMP “ “ 1 2 3 2 x 2.8mH 2 x 10mH 2 x 10mH 1 x 15nF 1 x 15nF 1 x 47nF BZV04/B0322/04 = 3 AMP “ “ 1 2 3 2 x 0.75mH 2 x 1.8mH 2 x 1.8mH 1 x 15nF 1 x 15nF 1 x 47nF 6 AMP “ “ 1 2 3 2 x 0.3mH 2 x 0.7mH 2 x 0.7mH 1 x 15nF 1 x 15nF 1 x 47nF 10 AMP “ “ 1 2 3 2 x 0.17mH 2 x 0.35mH 2 x 0.17mH 1 x 15nF 1 x 15nF 1 x 47nF BZV style Polysnap module with PX0575 IEC power inlet, filter rated at 3 amps, L/C circuit version 2 (L1 = 2 x 1.8mH, Cx = 1 x 15nF), without bleed resistor, with surge protection device fitted, 2.8mm tabs and two fuseholders. Filter Specification Max. Working Voltage: 250V a.c. 50-400Hz Earth Leakage Current: <100µA (typically 5µA, 250V. 50Hz) Temperature Range: –25ºC to +85ºC Max. Ambient Temp.: (@ Full Load) 40ºC (derate linearly to 0A @ 85ºC) Test Voltage: 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral Approvals: Attenuation Curves: 126 See PS01/B filter, page 134 www.elektron-bulgin.com Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:54 Page 127 POLYSNAP® POWER INLET MODULES C14 Inlet Single Fuse - Standard Filter EMI FILTER OPTIONS ᔢ For Polysnap modules BZV01, BZV02, BZH01, BZH02, BZH11, BZH12, BZH19, BZH20, BVA01, BVA02, BVB01, BVB02 ᔢ PF0011 style single fuse IEC inlet ᔢ Using PS21/A style filter ᔢ Standard Attenuation Filter Bxxxx/A xx x x / xx Polysnap Part No. Filter Type Rating L/C Circuit Additional Components Polysnap Part No. From Polysnap Selection A = Standard 01 = 1A 2 = Version 2 0 = None From Polysnap Selection 03 = 3A 3 = Version 3 Rating Version L1 Cx Cy 1 AMP “ “ 1 2 3 3 AMP “ “ 1 2 3 2 x 1.8mH 2 x 6.5mH 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 6 AMP “ “ 1 2 3 2 x 0.7mH 2 x 2mH 1 x 15nF 1 x 47nF 2 x 2.2nF 2 x 2.2nF 10 AMP “ “ 1 2 3 Part No. Example BZV01/A0630/01 = 2 x 12mH 1 x 47nF 2 x 2.2nF BZV style Polysnap module with PF0011 single fused (5 x 20mm) IEC power inlet, filter rated at 6 amp, L/C circuit version 3 (L1 = 2 x 2.0mH, Cx = 1 x 47nF, Cy = 2 x 2.2nF), 6.3mm tabs and single pole switch. Filter Specification Max. Working Voltage: 250V a.c. 50-400Hz Earth Leakage Current: <0.35mA (250V. 50Hz) Temperature Range: –25ºC to +85ºC Max. Ambient Temp.: (@ Full Load) 40ºC (derate linearly to 0A @ 85ºC) Test Voltage: 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral Approvals: Attenuation Curves: www.elektron-bulgin.com See PS21/A filter, page 140 127 IEC CONNECTORS 06 = 6A Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:54 Page 128 POLYSNAP® POWER INLET MODULES C14 Inlet Twin Fuse - Standard Filter EMI FILTER OPTIONS ᔢ For Polysnap modules BZV15, BZV16, BZH13, BZH14, BZH15, BZH16, BZH21, BZH22, BVA15, BVA16, BVB15, BVB16 ᔢ PF0033 style twin fuse IEC inlet ᔢ Using PS26/A filter ᔢ Standard Attenuation Filter Bxxxx/A xx x x / xx Polysnap Part No. Filter Type Rating L/C Circuit Additional Components Polysnap Part No. From Polysnap Selection A = Standard 02 = 2A 2 = Version 2 0 = None From Polysnap Selection IEC CONNECTORS 04 = 4A 1 = Bleed (R) Resistor Rating Version L1 Cx Cy 2 AMP “ “ 1 2 3 2 x 1.8mH 1 x 15nF 2 x 2.2nF 4 AMP “ “ 1 2 3 Part No. Example BZH13/A0420/00 = BZH style Polysnap module with PF0033 twin fused (5 x 20mm) IEC power inlet, filter rated at 2 x 0.7mH 1 x 15nF 2 x 2.2nF 4 amps, L/C circuit version 2 (L1 = 2 x 0.7mH, Cx = 1 x 15nF, Cy = 2 x 2.2nF), without bleed resistor fitted, 6.3mm tabs and no additional components. Filter Specification Max. Working Voltage: 250V a.c. 50-400Hz Earth Leakage Current: <0.35mA (250V. 50Hz) Temperature Range: –25ºC to +85ºC Max. Ambient Temp.: (@ Full Load) 40ºC (derate linearly to 0A @ 85ºC) Test Voltage: 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral Approvals: Attenuation Curves: 128 See PS26/A filter, page 142 www.elektron-bulgin.com Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:54 Page 129 POLYSNAP® POWER INLET MODULES C14 Inlet Twin Fuse - Medical Filter EMI FILTER OPTIONS ᔢ For Polysnap modules BZV15, BZV16, BZH13, BZH14, BZH15, BZH16, BZH21, BZH22, BVA15, BVA16, BVB15, BVB16 ᔢ PF0033 style twin fuse IEC inlet ᔢ Using PS26/B style filter ᔢ Medical Attenuation Filter Bxxxx/Bxx x x / xx Polysnap Part No. Filter Type Rating L/C Circuit Additional Components Polysnap Part No. From Polysnap Selection B = Medical 02 = 2A 2 = Version 2 0 = None From Polysnap Selection Rating Version L1 Cx 2 AMP “ “ 1 2 3 2 x 1.8mH 1 x 15nF 4 AMP “ “ 1 2 3 1 = Bleed (R) Resistor Part No. Example BZH15/B0221/01 = BZH style Polysnap module with PF0033 twin fused (5 x 20mm) IEC power inlet, filter rated at 2 x 0.7mH 1 x 15nF 2 amp, L/C circuit version 2 (L1 = 2 x 1.8mH, Cx = 1 x 15nF), with bleed resistor fitted, 6.3mm tabs and single pole switch. Filter Specification Max. Working Voltage: 250V a.c. 50-400Hz Earth Leakage Current: <100µA (typically 5µA 250V. 50Hz) Temperature Range: –25ºC to +85ºC Max. Ambient Temp.: (@ Full Load) 40ºC (derate linearly to 0A @ 85ºC) Test Voltage: 2700V d.c. 2 secs. Lines to Earth 1100V d.c. 2 secs. Live to Neutral Approvals: Attenuation Curves: www.elektron-bulgin.com See PS26/B filter, page 144 129 IEC CONNECTORS 04 = 4A Conns1 - Polysnap 2010:Conns1 - Polysnap 2005 8/6/10 16:54 Page 130 IEC CONNECTORS POLYSNAP® POWER INLET MODULES 130 www.elektron-bulgin.com