CAMBION Wearnes Cambion LTD Castleton, Hope Valley, Derbyshire, S33 8WR, England Telephone: +44(0)1433 621555 Fax: +44(0)1433 621290 Web: www.cambion.com Email: [email protected] Technical Data Sheet 460-1523 Swage mount, right angle, .080 (2,03) diameter pin Recommended mounting hole .094 (2,39) ± .002 (0,05) How to order code 460-1523-XX-YY-00 Basic Part No XX= L dimension, YY = Plating Finish Component Pin Material Brass Basic Part Number (XX) -01 -02 -03 MATERIALS Finish (-03) Gold over Nickel Finish (-04) Electro-tin over copper DIMENSIONS 460-1523 L .051 (1,30) .081 (2,08) .112 (2,87) SWAGE TOOLING Recommended Swaging Tools:Anvil Punch Board Thickness .031 (0,79) .061 (1,57) .094 (2,39) 435-6523-01-00-00 435-6663-01-00-00 Because of pin configuration, these tools cannot be used in manual swager 435-3803-01-00-00 Copyright Cambion Thursday, 13 February 2003 Page 1 of 1