DATA SHEET 1/12 1. Scope of Application This data sheet is applied to the LED package, model CL-L400-MC1N1-A. 2. Part code CL - L400 - M C1 N1 - A - T [1] [2] [3] [4] [5] [1] Part Code [2] Special feature M : General color rendering index Ra 80 minimum. [3] Watt class C1 : 1 watt class package [4] Chromaticity range N1 : Corrirated color temperature 5000K [5] Shipping specification T : Taping ■ Features ■ ☞ External Dimensions： ： 5.0×5.0×0.8 mm ： ☞ Internal Structure： ： Lead frame ： ☞ Luminous Flux： ： 118 lm @ 350 mA ☞ CCT： ： 5000 K (ANSI C78.377 Compliant) ： ☞ CRI: Ra 80 min. ☞ Thermal Resistance： ： 9 ： C/W ☞ RoHS Compliant Symbol Name CITILED CL-L400-MC1N1-A CITIZEN ELECTRONICS CO.,LTD. JAPAN Ref.CE-P1585_10/11 DATA SHEET 2/12 3. Outline drawing Unit: mm Tolerance : ±0.1 Cathode mark Anode Cathode Anode Cathode 4. Performance (1) Absolute Maximum Rating Parameter Symbol Rating Value Unit Input Power 2.0 *1 Pi W IF mA Forward Current 600 *1 V V Reverse Voltage 5 R Top -30 ~ +85 C Operating Temperature Tst -40 ~ +100 C Storage Temperature Solder Terminal Temperature 85 *2 Ts C Junction Temperature Tj 120 C *3 *1 Input power and forward current are the values when the LED is used within the range of the derating curve in this data sheet. *2 Ts : Anode solder terminal. *3 D.C. Current ： Tj = Ts + Rj-s x Pi Symbol Name CITILED CL-L400-MC1N1-A CITIZEN ELECTRONICS CO.,LTD. JAPAN Ref.CE-P1585_10/11 DATA SHEET (2) Electro-optical Characteristics Parameter Forward Voltage Luminous Flux CRI Thermal Resistance Symbol VF φv Ra Rj-c Condition IF=350mA IF=350mA IF=350mA Junction-Case 3/12 Min. 2.8 89 80 - Typ. 3.1 118 9 Max 3.4 - Ts=25C Unit V lm C/W Chromaticity coordinates ( Condition : IF=350mA, Ts = 25C) 5000K Center a b c d x 0.3447 0.3551 0.3376 0.3366 0.3515 y 0.3553 0.3760 0.3616 0.3369 0.3487 *The chromaticity center refers to ANSI C78.377:2008. x-y chart-CIE1931 0.38 0.37 y 0.36 Color Region (ANSI) 0.35 0.34 0.33 0.33 0.34 x 0.35 0.36 Note: The tolerance of measurement at our tester is VF+/-3% , Φv+/-10% , Chromaticity(x,y)+/-0.005 and Ra+/-1. Symbol Name CITILED CL-L400-MC1N1-A CITIZEN ELECTRONICS CO.,LTD. JAPAN Ref.CE-P1585_10/11 DATA SHEET 4/12 5. Characteristics 3.5 3.0 2.5 VF [V] ･Forward Current vs. Relative Luminous Flux Ts=25C 180% 160% Relative Luminous Flux [a.u.] ･Forward Current vs. Forward Voltage Ts=25C 4.0 2.0 1.5 1.0 0.5 140% 120% 100% 80% 60% 40% 20% 0% 0.0 0 0 100 200 300 400 500 600 700 100 200 300 400 500 600 700 IF [mA] IF [mA] ･Forward Current vs. Chromaticity Coordinate Ts=25C 0.020 ∆ｘ 0.015 ∆ｙ 0.005 △x, △y △x, △y 0.010 ･Case Temperature vs. Chromaticity Coordinate IF=350mA 0.020 ∆ｘ 0.015 ∆ｙ 0.010 0.000 -0.005 0.005 0.000 -0.005 -0.010 -0.010 -0.015 -0.015 -0.020 -0.020 0 100 200 300 400 500 600 700 0 25 50 75 100 Ts [℃] IF [mA] Symbol Name CITILED CL-L400-MC1N1-A CITIZEN ELECTRONICS CO.,LTD. JAPAN Ref.CE-P1585_10/11 DATA SHEET ･Case Temperature vs. Forward Voltage ･Case Temperature vs. Relative Luminous Flux IF=350mA 3.5 IF=350mA 120% Relative Luminous Flux [a.u.] 3.0 2.5 VF [V] 5/12 2.0 1.5 1.0 0.5 100% 80% 60% 40% 20% 0.0 0% 0 25 50 75 100 0 25 ･Case Temperature vs. Allowable Forward Current ･Spectrum Relative Emission Intensity [a.u.] 700 600 IF [mA] 500 400 300 200 100 100% 80% 60% 40% 20% 0% 350 40 100 60 80 Ts [℃] Ts=25C IF=350mA 120% 0 20 75 Ts [℃] Ts [℃] 0 50 450 550 650 750 850 λ [nm] 100 120 140 ･Directive Characteristic -40° -30° -20° -10° 100% 10° 20° 30° 40° -50° 50° Y 80% -60° 60° 60% -70° 40% -80° 20% 70° 80° X direction Y direction -90° X 90° 0% Symbol Name CITILED CL-L400-MC1N1-A CITIZEN ELECTRONICS CO.,LTD. JAPAN Ref.CE-P1585_10/11 DATA SHEET 6/12 6. Reliability （１）Datails of the tests Test Item Continuous Operation Test Low Temperature Storage Test High Temperature Storage Test Moisture-proof Test Thermal Shock Test Solder heat resistance test Test Condition Ta=25 C, IF=350mA× 1000 hours -40 C × 1000 hours 100 C × 1000 hours 60 C, 90 %RH for 500 hours -40 C × 30 minutes – 100 C × 30 minutes, 100 cycle Recommended temperature profile (reflow soldering)× 2, (2nd test must be started after the samples are stabilized thermally.) (2)Judgement Criteria of Failure for Reliability Test Measuring Item Forward Voltage Total Luminous Flux Symbol VF φv Measuring Condition IF=350mA IF=350mA (Ta=25℃) Judgement Criteria for Failure >U X 1.1 <S X 0.70 U defines the upper limit of the specified characteristics. S defines the initial value. Note : Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be return to the normal ambient conditions after the completion of each test. Symbol Name CITILED CL-L400-MC1N1-A CITIZEN ELECTRONICS CO.,LTD. JAPAN Ref.CE-P1585_10/11 DATA SHEET 7/12 7. Taping Specifications (1) Dimensions of Reel Unit : mm (2) Dimensions of Career tape Unit : mm Cathode Anode Anode (3) Configration of Tape (END) (START) More than 40mm Unloaded part (4) Quantity Mounted with CITILED Leading part more than 400nm 400mm 4000pcs/reel Symbol Name CITILED CL-L400-MC1N1-A CITIZEN ELECTRONICS CO.,LTD. JAPAN Ref.CE-P1585_10/11 DATA SHEET 8/12 8. Packing Specification (1) Moisuture-Proof Packing To prevent moisture absorption during transportation and strage, reels are packed in aluminium envelpoed which contain a desicant with a humidity indicator. Aluminum envelop Reel Polyester Zip fastener Desiccant Label (2) Storage To prevent moisture absorption, it is strongly recommended that reels (in bulk ore taped) should be stored in the dry box(or the desicator) with a desiccant as the appropriate strage place. If not, the following condition is recommended. Temperature : 5~30C Humidity : 60%RH max The devices should be mounted within 168H(7days) after unpacking. If you store the unpacked reels, please store them in the dry box or seal them into the envelop again. (3) Using condition This devices contain silver plated elctrode. So, when being exposed to environment which contains corrosive gases, the silver plating becomes tarnished. Tarnished plating may lead to poor solderability and degradation of optical characteristics. Please DO NOT exposed this debvice to corrosive atomosphere anytime (during storage, or after mounted). Please take care above when designing your product. Symbol Name CITILED CL-L400-MC1N1-A CITIZEN ELECTRONICS CO.,LTD. JAPAN Ref.CE-P1585_10/11 DATA SHEET 9/12 9. Precautions 1. Handling precaution (1) Avoid the application of any stress to the encupsulant. (2) Avoid any contact by a sharp metal nail or other materials with the encupsulant. encupsulant (Hatching area) φ =4.4mm NG (3) Pick and Place Recommend condition : nozzle inner radius ≧φ4.4mm Avoid direct contact to the encapsulant with the nozzle. Bad ex : narrow nozzle (4). PCB handling Bending the circuit board with soldered LEDs may cause breakage of LEDs. Please take care to bow, twist, and warpage of fthe PCB. Cathode mark 2. Lighting at low current A minimum current value of lighting of all dice is 6mA. When a minimal current is applied, LED dice may look different in their brightness due to the individual difference of the LED element, and it is not a failed product. 3. Handling of static electricity These products are sensitive to static electricity charge. Please take measure to prevent any static electricity being produced as the wearing of a wristband or anti-static gloves when handling this product. All devices, equipment, and machinary must be properly grounded. It is recommended that precautions be taken against surge voltage to the equipment that mounts the LEDs. When inspecting the final products in which LEDs were assembled, it is recommended to check whether the assembled LEDs are damaged by static electricity or not. It is easy to find static-damaged LEDs by a light-on test. Symbol Name CITILED CL-L400-MC1N1-A CITIZEN ELECTRONICS CO.,LTD. JAPAN Ref.CE-P1585_10/11 DATA SHEET 10/12 9. Precautions (continued) 4. Designing precaution A constant current circuit is recommended as a drive circuit. When using two or more LED packages, connect current limiting resistor in series on each path is recommended. R R R R R R R ex. Circuit with resistor. CL-L400 has small electrode at the side of package. Please take care about shortage with conductive rubbish. Cathode Anode Please design a circuit that prevents any reverse voltage (excess current) from being fig : small electrode applied to this product instantaneously when the circuit is ON or OFF. Please be aware that this product should not come into contact with any other parts in assembled status. 5. Soldering (1) Lead free soldering 1) Following Melting temperature soldering paste : 216~220C. is recommended Composition : Sn 3.5 Ag 0.75 Cu T e m p e ra tu re 2) The temperature profile at the top surface of the parts is recommended as below. 4 °C/sec. Max 4°C/sec. Max 220 °C 160 ~ 180 °C 140sec 260°C Max 3sec. Max 60 ~ 70sec Time 3) It is requested that products shuld be handled after their temperature has dropped down to the normal room temperature. (2) Recommended soldering pattern Mountability and solderability need to be optimized with actual conditions such as amount of solder, reflow temperature applied in the process. Symbol Name CITILED CL-L400-MC1N1-A CITIZEN ELECTRONICS CO.,LTD. JAPAN Ref.CE-P1585_10/11 DATA SHEET 11/12 9. Precautions (continued) 6. Heat generation As this product is designed with consideration of the heat release property of module, a heat release design is required to use this product effficiently. please ensure that heat generation is not in excess of the absolute maximum rating. Factors responsible for an increase in temperature include heat generation attributed to ambient temperature conditions or power dissipation. Thus, drive condition should be taken into consideration, depending on ambient temperature(Ta). *Citizen Electoronics cannnot guarantee if usage exeeds this recommended conditions. Please use it after sufficient verification is carried out on your own risk if necessary. 7. Eye Safety - The International Electrical Commission (IEC) published in 2006 IEC 62471 ”2006 Photobiological safety oflamps and lamp systems ” which includes LEDs within its scope. When sorting single LEDs according to IEC 62471, most white LEDs can be classified as belonging to either Exempt Group or Risk Group 1. - However, Optical characteristics of LEDs such as radiant flux, spectrum and light distribution are factors that affect the risk group determination of the LED, and especially a high-power LED, that emits light containing blue wavelengths, may have properties equivalent to those of Risk Group 2. - Great care should be taken when directly viewing an LED that is driven at high current, has multiple uses as a module or when focusing the light with optical instruments, as these actions may greatly increase the hazard to your eyes. - It is recommended to regard the evaluation of stand-alone LED packages as a reference and to evaluate the customer's final product. 8. The use of Class 2 power supply is assumed for this product. 9. If the product might to be used under the following conditions, the customer must evaluate its approproateness them. This product is not designed for use under the following conditions. in places where the product might: - get wet due to rain - suffer from damage caused by salt. - be exposed to corrosive gas such as Cl, H2S, NH3, SO2, Nox and so on. - be exposed to dust, fluid or oil. Symbol Name CITILED CL-L400-MC1N1-A CITIZEN ELECTRONICS CO.,LTD. JAPAN Ref.CE-P1585_10/11 DATA SHEET 12/12 10. Precautions with regard to product use 1. This document is provided for reference purposes only so that CITIZEN ELECTRONICS' products are used as intended. CITIZEN ELECTRONICS neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of CITIZEN ELECTRONICS or any third party with respect to the information in this document. 2. All information included in this document such as product data, diagrams, charts, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any CITIZEN ELECTRONICS' products listed in this document, please confirm the latest product information with a CITIZEN ELECTRONICS' sales office, and formal specifications must be exchanged and signed by both parties prior to mass production. 3. CITIZEN ELECTRONICS has used reasonable care in compiling the information included in this document, but CITIZEN ELECTRONICS assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 4. Absent ａ written signed agreement, except as provided in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, CITIZEN ELECTRONICS assumes no liability whatsoever, including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, business interruption and loss of data, and disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or no infringement. 5. Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability, products can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards to minimize risk and avoid situations in which a malfunction or failure of a product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. In addition, customers are also responsible for determining the appropriateness of use of any information contained in this document such as application cases not only with evaluating by their own but also by the entire system. CITIZEN ELECTRONICS assumes no liability for customers' product design or applications. 6. Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding the information contained in this document, or if you have any other inquiries. CITIZEN Micro HumanTech is a registered trademark of Citizen Holding Co., Japan. CITILED is a registered trademark of CITIZEN ELECTRONICS CO., LTD. Japan Symbol Name CITILED CL-L400-MC1N1-A CITIZEN ELECTRONICS CO.,LTD. JAPAN Ref.CE-P1585_10/11