Dyad® FR2 Features • Small size • SMT-compatible • Easily formed leads • Sputtered ruthenium contacts • Hermetically sealed contacts • Fast switching speed — up to 500Hz • Wide range of available magnetic sensitivities Description Clare’s DYAD® dry reed switches are ideally suited for small switching signal applications. This switch has sputtered ruthenium contacts and an extraordinary seal strength, achieved by a patented laser sealing of the glass. In low level or dry switching environments, both switches typically provide >1 billion operations. The switches have hermetically sealed contacts and offer a wide range of available magnetic sensitivities. Applications • Security • Proximity sensing • Smoke alarms • Automotive • Level sensor • Lamp current sensor • Relays Ordering Information A complete part number is represented by the digits to the right. For example, FR2S1030 is a DYAD® with a minimum operate value of 10 and a maximum of 30. Refer to the switch operating specification charts for available ranges. Special ranges are available upon request. FR2 S XX XX Minimum Operate Value (NI) Maximum Operate Value (NI) Surface Mount Dyad Refer to operating characteristics table for complete part number. Approvals • UL listed DYAD® Part # Standard Test Coil The magnetic force (expressed in NI, AT or Ampere Turns) required to cause the reed switch contacts to close is called the pull-in or operate value. FR2 Part # Coil definition Coil resistance Number of turns Wire size (nom. diameter) Bobbin diameter (inside coil) Winding length Coil - 1 NARM1 CTC01 1200Ω 5,000 0.0399mm (AWG 46) 3.96mm 10.4mm FR2S1015 FR2S1020 FR2S1030 FR2S1520 FR2S1525 FR2S2025 10 to 15 10 to 20 10 to 30 15 to 20 15 to 25 20 to 25 DYAD® Surface Mount Part # (1) Consult factory for test procedure. The reed switch shall be placed in the test coil with the gap centered in the core of the coil winding. Test leads and their clips must be non-magnetic. The longitudinal axis of the test coil and the test switch shall be vertical. FR2024 FR2259 FR2282 FR2025 FR2249 FR2026 1 2 3 DS-FR2-R2 Operate Range (NI)1 Operate Range (NI)1,2,3 10 to 15 10 to 20 10 to 30 15 to 20 15 to 25 20 to 25 Tolerance = ± 1.5NI Full Blade Sensitivity Surface Mount Switches are packaged 3,000 parts per reel www.clare.com 1 Dyad® FR2 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for extended period may degrade the device and effect its reliability. Ratings (@ 25˚ C) Parameter Min Switching Voltage FR2 - DYAD® Switching Current FR2 - DYAD® Carry Current FR2 - DYAD® Switching Frequency FR2 - DYAD® Contact Resistance FR2 - DYAD® Typ Max Units 200 Volts 0.5 Amps 1.5 Amps 500 Hz 150 mΩ (See detailed specifications for more information.) Specifications All parameters are at 25°C unless otherwise stated. PARAMETER Contact Ratings Operate ampere turns range Release ampere turns range Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy Static Contact Resistance Contact Material Switch Specifications Insulation Resistance(2) Capacitance Dielectric Strength(5) Operate Time, including bounce Release Time Environmental Ratings Storage Temperature Operating Temperature Soldering Temperature Vibration Resistance Shock Resistance Weight CONDITIONS SYMBOL MIN TYP MAX UNITS Full Blade Tolerance = ± 1.5NI Full Blade Tolerance = ± 1.5NI Max DC/PeakAC Resistive Max DC/PeakAC Resistive Max DC/PeakAC Resistive Max DC/PeakAC Resistive 1V, 10mA Signal Level 10V, 10mA Low Level 50V, 100mA Telecom Load 100V, 100mA Rated Loads 50mV, 10mA(1) AT AT VL IL IC CR - 10 5 - 1000 500 2 2 80 Ru 30 30 200 500 1.5 10 150 - NI NI VDC mAmps Amps VA x106 Ops x106 Ops x106Ops x106 Ops mΩ - 100V, 25°C, 40% RH Across Open Contacts Between Contacts At nominal coil voltage, 10Hz Square Wave Zener-Diode Suppression(3) IR TOP 109 250 - 1011 0.3 300 - 0.5 Ω pF VDC/Peak AC ms TREL - - 0.2 ms TA TO G S - -40 -40 - 0.13 +125 +125 +240 20 100 - °C °C °C Gs Gs grams/unit 5Hz - 200Hz 11±1ms, 1/2 Sine Wave (1) Contact resistance measured with 4 terminal method, 1.1" between test leads >1012 Ω is available upon request A 24V zener in series with a diode across the coil (4) Use caution not to exceed vibration resistance limits while ultrasonically cleaning. Contact Clare Engineering for more details/recommendations (5) 15 ampere turn minimum (2) (3) 2 www.clare.com Rev. 2 Dyad® FR2 Performance Data* DYAD® CM15 Series Operate NI vs. Release NI Test Coil: NARM 1; Full Length Terminals Percent Operate Increase After Lead Cut Release NI 20 15 10 5 0 10 12 14 1200 40 Minimum Maximum 25 Dielectric Breakdown (VDC) 30 35 30 25 20 15 10 5 16 18 20 22 24 26 28 30 DYAD® Capacitance Across Open Contacts 30 25 20 15 10 5 0 0.25 0.3 0.35 600 400 200 0.8 0.40 0.9 1 1.1 1.2 8-9 1.355 12-13 16-17 20-21 24-2526-32 Overall Length in Inches Average Operate (NI) DYAD® Contact Resistance Throughout Life 10V, 12mA Resistive Load DYAD® Contact Resistance Throughout Life 50V, 100mA Resistive Load 60 Average Resistance (mOhms) Average Resistance (mOhms) Number of Units 35 0.2 800 0 0.7 40 Min. Avg. Max. 1000 0 Operate NI 0.15 DYAD® Dielectric Breakdown vs. Operate Sensitivity DYAD® Operate Shift After Lead Trimming 50 40 30 20 10 0 80 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100 110 120 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 Operations (Millions) Operations (Millions) Capacitance (pF) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Mechanical Dimensions DYAD® DYAD® SMT 2.29 MAX. 2.29 MAX. (0.090) + 7o 0.25 MAX. (0.900) 0.18 (R 0.010) (0.007) 15.24 MAX. (0.600) 4 PLACES 2.03 MAX. 1.22 (0.048) (0.080) 1.65 MAX. (0.065) 1.20 TYP. 15.24 MAX. (0.047) (0.600) 1.32 MAX. 1.02 (0.052) (0.040) + 10o 17.53 (0.690) MAX. TWIST ALLOWED 9.65 REF. TYP. BOTH ENDS + 5o (0.380) 34.54 MAX. 1.32 MAX. (1.360) 19.56 MAX. (0.052) (0.770) Recommended Pad Sizes DYAD® SMT 2.54 (0.100) 2.79 (0.110) 16.01 MAX. (0.63) Rev. 2 www.clare.com DIMENSIONS mm (inches) 3 Dyad® FR2 Tape & Reel Packaging Tape and Reel Packaging for DYAD®-Gull Wing Terminals 2.00 .300 ± .013 (.012 ± .0005) Top Cover (.079 ) 1.75 4.00 1.55 ± .05 (.061 ± .002) (.157) (.069) Tape Thickness .10 MAX. (.004) 32.00 ± .31 14.20 (1.260 ± .012) (.559) 23.01 MAX (.906) 20.12 (.792) Embossed Carrier 28.40 14.63 (1.118) (.576) 2.29 (.090) Embossment .50 (.020) Top Cover Tape 8.00 (.315) 2.49 (.098) 2.00 MIN. DIA. TYP. (.079) User Direction of Feed 8¡ MAX 1.93 .28 (.076 ) (.011 ) 2.49 (.098 ) DIMENSIONS mm (inches) 4 www.clare.com Rev. 2 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Switch Division 4315 Earth City Expresssway St. Louis, MO 63045 Tel: 1-314-770-1832 Fax: 1-314-770-1812 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other then circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: PB-FR2-R2 ©Copyright 2000 Ultra-Mini Dyad™, Mini Dyad™, and Dyad® are trademarks of Clare, Inc. All rights reserved. Printed in USA. 3/7/01