CLARE PLA190

PLA190
Single Pole OptoMOS® Relay
Load Voltage
Load Current
Max RON
PLA190
400
150
22
Description
The PLA190 is a 1-Form-A solid state relay that uses optically coupled relay technology to provide an enhanced
5000V isolation barrier between the input and output of the
relay. The efficient MOSFET switches use Clares patented
OptoMOS architecture. The optically coupled input is controlled by a highly efficient GaAIAs infrared LED.
Units
V
mA
Ω
Features
• 5000VRMS Input/Output Isolation
• Small 6 Pin DIP Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
Approvals
• UL Approved to UL1577
• CSA Certified
• Complies with EN60950
Ordering Information
Applications
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hookswitch
• Dial Pulsing
• Ground Start
• Ringer Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Part #
PLA190
PLA190S
PLA190STR
Description
6 Pin Dip (50/Tube)
6 Pin Surface Mount (50/Tube)
6 Pin Surface Mount (1000/Reel)
Pin Configuration
PLA190 Pinout
PLA190 Pinout
AC/DC Configuration
DC Only Configuration
+ Control
Ð Control
NC
1
6
2
5
3
4
Load
+ Control
Do Not Use
Ð Control
NC
Load
1
6
2
5
3
4
+ Load
Ð Load
Switching Characteristics of
Normally Open (Form A) Devices
10ms
CONTROL
+
90%
LOAD
10%+
10%+
TON
DS-PLA190-R1
www.clare.com
TOFF
1
PLA190
Absolute Maximum Ratings (@ 25˚ C)
Parameter
Input Power Dissipation
Input Control Current
Peak (10ms)
Reverse Input Voltage
Total Power Dissipation
Isolation Voltage
Input to Output
Operational Temperature
Storage Temperature
Soldering Temperature
DIP Package
Surface Mount Package
(10 Seconds Max.)
1
Derate Linearly 1.33 mw/˚C
2
Derate Linearly 6.67 mw/˚C
Min
-
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at these or
any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure
of the device to the absolute maximum ratings for an
extended period may degrade the device and effect its
reliability.
Typ Max Units
- 1501 mW
50
mA
1
A
5
V
- 8002 mW
5000
-40
-40
-
VRMS
+85
°C
+125 °C
-
-
+260
+220
°C
°C
Electrical Characteristics
Parameter
Output Characteristics @ 25°C
Load Voltage (Peak)
Load Current (Continuous)
AC/DC Configuration
DC Configuration
Peak Load Current
On-Resistance
AC/DC Configuration
DC Configuration
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics @ 25°C
Input Control Current
Input Dropout Current
Input Voltage Drop
Reverse Input Voltage
Reverse Input Current
Common Characteristics @ 25°C
Input to Output Capacitance
Input to Output Isolation
2
Conditions
Symbol
Min
Typ
Max
Units
-
VL
-
-
400
V
10ms
IL
IL
IL
-
-
150
250
400
mA
mA
mA
IL=150mA
IL=250mA
VL=400V
RON
RON
ILEAK
-
-
22
7
1
Ω
Ω
µA
IF=5mA, VL=10V
IF=5mA, VL=10V
50V; f=1MHz
TON
TOFF
COUT
-
25
1
0.5
-
ms
ms
pF
IL=150mA
IF=5mA
VR=5V
IF
IF
VF
VR
IR
5
0.4
0.9
-
0.7
1.2
-
50
1.4
5
10
mA
mA
V
V
µA
t=60 seconds
CI/O
VI/O
5000
3
-
-
pF
VRMS
www.clare.com
R1
PLA190
PERFORMANCE DATA*
PLA190
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 150mADC; IF = 5mADC)
35
30
30
25
20
15
10
25
20
15
10
5
5
0
0
1.19
1.21
1.23
Device Count (N)
35
30
1.17
15
1.25
16
17
18
19
15
10
0
20
441.5
25
20
20
10
5
Device Count (N)
25
20
15
15
10
1.65
1.95
2.25
0.75
1.05
LED Current (mA)
PLA190
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 100mADC; IF = 5mADC)
300
25
Load Current (mA)
20
15
10
5
0.23
0.26
0.29
0.32
10
1.35
1.65
1.95
0.23
2.25
0.26
0.29
0.35
10mA
5mA
AC/DC Configuration
10mA
5mA
100
50
0
0
20
40
60
80 100 120
-20
0
20
40
60
80
100
PLA190
PLA110
Typical Leakage vs. Temperature
(Measured across Pins 4 & 6)
25
0.035
20
0.030
IF=5mA
Leakage (µA)
10
6
PLA190
Typical On Resistance vs. Temp.
Load Current=100mA Instantaneous
On-Resistance (Ω)
15
IF=10mA
7
-40
25
20
IF=5mA
8
0
Temperature (°C)
5mA
10mA
9
5
-40 -20
Turn-Off (ms)
PLA190
Typical On-Resistance vs. Temperature
(Load Current = Max rated at Temp.)
AC/DC Configuration
0.38
10
200
0.38
0.35
PLA190
Typical On-Resistance vs. Temperature
(Load Current = Max Rated at Temp.)
DC Configuration
DC Configuration
150
0.32
Turn-Off (ms)
PLA190
Typical Load Current vs. Temperature
250
0
486.5
15
LED Current (mA)
On-Resistance (Ω)
1.35
477.5
0
0
1.05
468.5
5
5
0
459.5
PLA190
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 100mADC; IF = 5mADC)
25
0.75
450.5
Blocking Voltage (V)
PLA190
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
Device Count (N)
Device Count (N)
20
On-Resistance (Ω)
PLA190
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 150mADC)
On-Resistance (Ω)
25
5
LED Forward Voltage Drop (V)
Device Count (N)
PLA190
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
35
Device Count (N)
Device Count (N)
PLA190
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25°C)
IF = 5mADC
15
10
0.025
0.020
0.015
0.010
5
0.005
5
0
-40
0
-40
-20
0
20
40
60
80
100
-20
0
20
40
60
80
Temperature (°C)
100
120
-40
-20
0
20
40
60
80
100
Temperature (°C)
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
R1
www.clare.com
3
PLA190
PERFORMANCE DATA*
PLA190
Typical Turn-On vs. Temperature
(Load Current = 100mADC)
PLA190
Typical Blocking Voltage vs. Temperature
0.6
Blocking Voltage (VRMS)
475
Turn-On (ms)
465
460
455
450
5mA
0.5
470
PLA190
Typical Turn-Off vs. Temperature
(Load Current = 100mADC)
0.3
0.4
Turn-Off (ms)
480
10mA
0.3
0.2
0.1
-40
-20
0
20
40
60
80
100
0
Temperature (°C)
0.25
0.2
0.15
0.1
IF=5mA
0.05
-40 -20
0
20
40
60
80 100 120
-40
-20
0
Temperature (°C)
PLA190
Typical LED Forward Voltage Drop
vs. Temperature
PLA190
Typical Turn-On vs. LED Forward Current
(Load Current = 150mADC)
LED Forward Voltage Drop (V)
1.8
0.30
Turn-Off (ms)
Turn-On (ms)
10mA
5mA
1.0
0.25
0.20
0.15
0.8
0.06
0.04
0.02
0
20
40
60
80
100
120
0
0
5
Temperature (°C)
PLA190
Typical IF for Switch Operation
vs. Temperature
(Load Current = 100mADC)
LED Current (mA)
1.500
1.000
0.500
-20
0
20
40
20
25
30
35
40
45
50
0
5
60
80
100
1.500
1.000
0.500
-40
-20
0
20
40
60
20
25
30
35
40
45
50
150
2.000
Temperature (°C)
Temperature (°C)
15
PLA190
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C)
IF = 5mADC
2.500
0
10
Forward Current (mA)
PLA190
Typical IF for Switch Dropout
vs. Temperature
(Load Current = 100mADC)
3.000
2.000
-40
15
Forward Current (mA)
2.500
0
10
Load Current (mA)
3.000
LED Current (mA)
0.08
0
-20
100
0.10
0.05
-40
80
0.10
1.6
1.2
60
0.12
0.35
50mA
40
PLA190
Typical Turn-Off vs. LED Forward Current
(Load Current = 150mADC)
0.40
1.4
20
Temperature (°C)
80
100
100
50
0
-50
-100
-150
-2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5
Load Voltage (V)
PLA190
PLA110
Energy Rating Curve
1.2
Load Current (A)
1.0
0.8
0.6
0.4
0.2
0
10µs
100µs
1ms
10ms 100ms
1s
10s
100s
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
4
www.clare.com
R1
PLA190
Mechanical Dimensions
2.540 ± .127
(.100 ± .005)
7.620 ± .254
(.300 ± .010)
7.239 TYP.
(.285)
3.302
(.130)
6.350 ± .127
(.250 ± .005)
9.144 ± .508
(.360 ± .020)
6-.800 DIA.
(6-.031 DIA.)
8.382 ± .635
(.330 ± .025)
6.350 ± .127
(.250 ± .005)
.635 TYP.
(.025)
PC Board Pattern
(Top View)
2.540 ± .127
(.100 ± .005)
2.540 ± .127
(.100 ± .005)
3.302
(.130)
7.620 ± .127
(.300 ± .005)
5.080 ± .127
(.200 ± .005)
.457 ± .076
(.018 ± .003)
7.620 ± .254
(.300 ± .010)
2.540 ± .127
(.100 ± .005)
6.350 ± .127
(.250 ± .005)
9.144
(.360)
6 Pin DIP Surface Mount (“S” Suffix)
4.445 ± .127
(.175 ± .005)
PC Board Pattern
(Top View)
8.382 ± .635
(.330 ± .025)
6 Pin DIP Through Hole (Standard)
9.525 ± .254
(.375 ± .010)
8.305 ± .127
(.327 ± .005)
1.905 ± .127
(.075 ± .005)
.254 TYP.
(.010)
.457 ± .076
(.018 ± .003)
1.499 ± .127
(.059 ± .005)
Tape and Reel Packaging for 6 Pin Surface Mount Package
330.2 DIA.
(13.00)
Top Cover
Tape Thickness
.102 MAX.
(.004)
6.731 MAX.
1.753 ± .102
(.265)
(.069 ± .004)
.406 MAX.
(.016)
2.007 ± .102 1.498 ± .102 3.987 ± .102
(.079 ± .004) (.059 ± .004) (.157 ± .004)
7.493 ± .102
(.295 ± .004)
1
6
12.090
(.476)
10.100
(.398)
4.877
(.192)
Top Cover
Tape
Embossed Carrier
16.002 ± .305
(.630 ± .012)
.050R TYP.
11.989 ± .102
(.472 ± .004)
10.100 ± .102
(.398 ± .004)
1.549 ± .102
(.061 ± .004)
User Direction of Feed
Embossment
Dimensions
mm
(inches)
R1
www.clare.com
5
Worldwide Sales Offices
CLARE LOCATIONS
EUROPE
ASIA PACIFIC
Clare Headquarters
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
European Headquarters
CP Clare nv
Bampslaan 17
B-3500 Hasselt (Belgium)
Tel: 32-11-300868
Fax: 32-11-300890
Clare Micronix Division
145 Columbia
Aliso Viejo, CA 92656-1490
Tel: 1-949-831-4622
Fax: 1-949-831-4628
France
Clare France Sales
Lead Rep
99 route de Versailles
91160 Champlan
France
Tel: 33 1 69 79 93 50
Fax: 33 1 69 79 93 59
Asian Headquarters
Clare
Room N1016, Chia-Hsin, Bldg II,
10F, No. 96, Sec. 2
Chung Shan North Road
Taipei, Taiwan R.O.C.
Tel: 886-2-2523-6368
Fax: 886-2-2523-6369
SALES OFFICES
AMERICAS
Americas Headquarters
Clare
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Eastern Region
Clare
P.O. Box 856
Mahwah, NJ 07430
Tel: 1-201-236-0101
Fax: 1-201-236-8685
Toll Free: 1-800-27-CLARE
Central Region
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Western Region
Clare
1852 West 11th Street, #348
Tracy, CA 95376
Tel: 1-209-832-4367
Fax: 1-209-832-4732
Toll Free: 1-800-27-CLARE
Canada
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Germany
Clare Germany Sales
ActiveComp Electronic GmbH
Mitterstrasse 12
85077 Manching
Germany
Tel: 49 8459 3214 10
Fax: 49 8459 3214 29
Italy
C.L.A.R.E.s.a.s.
Via C. Colombo 10/A
I-20066 Melzo (Milano)
Tel: 39-02-95737160
Fax: 39-02-95738829
Sweden
Clare Sales
Comptronic AB
Box 167
S-16329 Spånga
Tel: 46-862-10370
Fax: 46-862-10371
United Kingdom
Clare UK Sales
Marco Polo House
Cook Way
Bindon Road
Taunton
UK-Somerset TA2 6BG
Tel: 44-1-823 352541
Fax: 44-1-823 352797
http://www.clare.com
Clare cannot assume responsibility for use of any circuitry other
than circuitry entirely embodied in this Clare product. No circuit
patent licenses nor indemnity are expressed or implied. Clare
reserves the right to change the specification and circuitry, without notice at any time. The products described in this document
are not intended for use in medical implantation or other direct life
support applications where malfunction may result in direct physical harm, injury or death to a person.
Specification: DS-PLA190-R1
©Copyright 2000, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
4/3/01