PS2601 AC Power Switch AC Operating Voltage Load Current On-State Voltage Drop PS2601 Units VRMS 1 A VRMS (AT IL = 1A) 1.2 Features • Load Current up to 1A (3A with heat sink) • Blocking Voltages up to 600V • 5mA Sensitivity • Zero-Crossing Detection • DC Control, AC Output • Optically Isolated • TTL and CMOS Compatible • Low EMI and RFI Generation • High Noise Immunity • VDE compatible • Machine Insertable, Wave Solderable Applications • Programmable Control • Process Control • Power Control Panels • Remote Switching • Gas Pump Electronics • Contractors • Large Relays • Solenoids • Motors • Heaters Description PS2601 is an AC Solid State Switch utilizing dual power SCR outputs. This device also includes zero turn on circuitry and is available with a blocking voltage up to 600V. Approvals • UL recognized file #: E69938 • CSA certified file #: LR 43639-8 Ordering Information Part # PS2601 Description 8 Pin SIP (25/Tube) Pin Configuration PS Series Pinout ZC 1 2 – LED + LED DS-PS2601-R9 www.clare.com 6 8 AC Load AC Load 1 PS2601 Absolute Maximum Ratings (@ 25˚ C) Parameter Min Input Power Dissipation - - 1501 Input Control Current Peak (10ms) - - 50 1 mA A Reverse Input Voltage - - 5 V Total Package Dissipation PS - - Isolation Voltage Input to Output mW 16002 mW 3750 - - VRMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C - - +260 +220 °C °C Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mW/˚C 2 Derate Linearly 16.6 mW/˚C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units Electrical Characteristics Parameters Conditions Symbol Min Typ Max Units - VDRM - - 600 V Output Characteristics @ 25°C Peak Blocking Voltage Load Current (Continuous) VL=120-240VAC IL 0.005 - 1 A Off State Leakage Current VDRM ILEAK - - 1 mA On-State Voltage Drop IL=1A - - 1.2 VRMS - dv/dt 1000 1200 - V/µS IF=5 mA IF=5 mA TON TOFF - - 0.5 0.5 cycles cycles - 2 5 V Critical Rate of Rise Switching Speeds Turn-on Turn-off Zero-Cross Turn-On Voltage 1st half cycle Sub. half cycle - - - 1 V 20 - 500 Hz PF 0.25 - - - - - - 3 - pF - IF IF 5 10 - 50 100 mA mA F=5mA VF 0.9 1.2 1.4 V 0.8 - - V VR=5V IR - - 10 uA Operating Frequency1 - Load Power Factor for Guaranteed Turn-On2 - Capacitance Input to Output Input Characteristics @ 25°C Input Control Current For Normal Environment For High Noise Environment Input Voltage Drop Input Drop-out Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance - CI/O - - 3 pF Input to Output Isolation - VI/O 3750 - - VRMS 1 2 2 Zero Cross 1st half cycle @ <100Hz Snubber circuits may be required at low power factors. www.clare.com Rev. 9 PS2601 PERFORMANCE DATA* PS2601 Load Current, Free Air PS2601 Load Current, Heat Sink 1.2 0.8 RΘJA = 60°C/W 0.6 0.4 3 PS with Thermal Clip attached to 3°C/W heat sink Peak Surge Current (A) Load Current (A) 1.0 Load Current (A) PS2601 Max. Surge Current (Non-Repetitive) 4 2 PS with Thermal Clip freestanding 1 0.2 15 10 5 0 -40 0 55 85 0 -40 Ambient Temperature (°C) 55 NOTE: Values apply to TJ = 50°C before Surge 20 85 16 Ambient Temperature (°C) PS2601 Typical Forward Voltage vs. Temperature 50 100 Pulse Duration (ms) PS2601 dv/dt Method PS2601 Typical dv/dt vs. Temperature Critical Rate of Rise (V/µs) Forward Voltage (V) 2.0 1.5 1.0 0.5 10 25 50 75 100 125 Ambient Temperature (°C) 150 Vo 1200 1000 800 Vo = 300V dv 0.63 x 300V dt RC 63% 600 In accordance with EIA/NARM Standards RS-443 for Solid State Relays 400 10% 200 0 25 50 Ambient Temperature (°C) 85 189 RC RC The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 9 www.clare.com 3 PS2601 Mechanical Dimensions 8 Pin SIP 3.302 ± .051 (.130 ± .002) 19.202 ± .381 (.756 ± .015) 8.99 (.354) 6.350 TYP. (.250) 3.30 (.130) 5.944 TYP. (.234) 10.160 (.400) 5.080 (.200) .508 TYP. (.020) Dimensions mm (inches) 4 www.clare.com Rev. 9 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA/PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-PS2601-R9 ©Copyright 2000, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 2/26/01