Comchip Low Profile SMD Bridge Rectifiers SMD Diode Specialist CGRHD101-G Thru. CGRHD107-G Reverse Voltage: 50 to 1000 Volts Forward Current: 1.0 A RoHS Device Features MDLS - Surge overload ratings to 35 amperes peak. 0.063(1.60) 0.055(1.40) 0.035 (0.90) 0.019 (0.50) -1.0A rating in low profile surface mount min-dip bridge save space on printed circuit board. - Ideal for automated replacement. ~ ~ + - 0.004(0.10) max. 0.228(5.80) 0.213(5.40) - Glass passivated chip junctions. - UL recognized file # E321971 0.106 (2.70) 0.090 (2.30) Mechanical data 0.012(0.30) 0.004(0.10) 0.043(1.10) 0.020(0.50) -Epoxy: UL94-V0 rate flame retardant. -Case: Molded plastic low profile SMD mini-dip(MDLS), Bridge case 0.284(7.20) 0.260(6.60) -Terminals: solderable per MIL-STD-750,method 2026. -Polarity: Marking on body. 0.197(5.00) 0.181(4.60) -Mounting Position: Any Dimensions in inches and (millimeter) -weight: 0.10 grams (approx.). Maximum Rating And Electrical Characteristics Rating at TA=25°C, unless otherwise noted. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Symbol CGRHD CGRHD CGRHD CGRHD CGRHD CGRHD CGRHD 103-G 101-G 102-G 104-G 105-G 106-G 107-G Unit Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum Continuous Reverse Voltage VR 50 100 200 400 600 800 1000 V Maximum Forward Rectified Current I(AV) 1.0 A IFSM 35 A at IF=0.5A VF 1.0 at IF=1.0A VF 1.1 Peak Forward Surge Current 8.3mS single half sine-wave, superimposed on rate load(JEDEC Method) Maximum Forward Voltage V @VR=VRRM TJ=25°C IR 5.0 @VR=VRRM TJ=100°C IR 150 Junction to ambient,note 1 RθJA 62.5 Junction to lead RθJL 25.0 Typical Junction Capacitance (Per leg, note 2) CJ 25 pF Operating Temperature Range TJ -55 to +150 °C TSTG -65 to +175 °C Maximum Reverse Current Typical Thermal Resistance Storage Temperature Range μA °C/W Notes: 1. Thermal resistance from Junction to Ambient and from junctionto lead mounted on glass epoxy P.C.B 0.8*0.8(20*20mm) copper pad. 2. Measure at 1.0 MHZ and applied reverse voltage of 4.0 votls. REV:B Page 1 QW-BBR77 Comchip Technology CO., LTD. Comchip Low Profile SMD Bridge Rectifiers SMD Diode Specialist RATING AND CHARACTERISTIC CURVES (CGRHD101-G thru CGRHD107-G) Fig.1 - Forward Current Derating Curve 0.8 0.6 0.4 0.2 0.1 0 20 40 60 80 single half-sine wave (JEDEC Method) 35 30 25 20 15 10 5 0 100 120 140 160 Pe 40 60 Hz resistive or inductive load Peak Forward Surge Current, IFSM (A) Average Forward Output Current , IF(AV) (A) 1.0 Fig.2 - Maximum Non-Repetitive Peak Forwafd Surge Current 1 cycle TJ=150°C 1.0 TJ=125°C TJ=25°C Pulse Width=300μS 1% duty cycle 0.4 0.6 0.8 1.0 1.2 Fig.4 - Typical Reverse Characteristics (Per Leg) Instantaneous Reverse Current, (µA) Instantaneous Forward Current, ( A ) 10 0.01 100 Number of Cycles at 60Hz Fig.3 - Typical Instantaneour Forward Characteristics (Per Leg) 0.1 10 1 Ambient Temperature, TA (°C) 1.4 1000 100 TJ=125°C 10 TJ=100°C 1.0 0.1 0.01 TJ=25°C 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage, (%) Instantaneous Forward Voltage, (V) Fig.5 - Typical Junction Capacitance (Per Leg) 100 Junction Capacitance, CJ ( pF ) TJ=25°C f=1.0MHZ Vsig=50mVp-p 10 0.01 1 10 100 Reverse Voltage, VR (V) REV:B Page 2 QW-BBR77 Comchip Technology CO., LTD. Comchip Low Profile SMD Bridge Rectifiers SMD Diode Specialist Reel Taping Specification d P0 P1 E T Index hole F + W B ~ ~ C A P 12 o 0 D2 D1 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed MDLS MDLS SYMBOL A B C d D D1 D2 (mm) 5.05 ± 0.10 7.01 ± 0.10 1.70 ± 0.10 1.50 ± 0.05 330 ± 1.50 75.00 ± 1.00 13.50 ± 0.50 (inch) 0.199 ± 0.004 0.276 ± 0.004 0.067 ± 0.004 0.059 ± 0.002 12.99 ± 0.059 2.95 ± 0.039 0.531 ± 0.020 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 8.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.25 12.0 ± 0.15 13.5 ± 0.50 (inch) 0.069 ± 0.004 0.217± 0.002 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.010 0.472 ± 0.006 0.531 ± 0.020 REV: B Page 3 QW-BBR77 Comchip Technology CO., LTD. Comchip Low Profile SMD Bridge Rectifiers SMD Diode Specialist Pinning information Simplified outlin Part Number + ~ ~ ~ + ~ - - Marking Code Marking code CGRHD101-G MBLS1A CGRHD102-G MBLS1B CGRHD103-G MBLS1D CGRHD104-G MBLS1G CGRHD105-G MBLS1J CGRHD106-G MBLS1K CGRHD107-G MBLS1M + Part Number - MBL S1X ~ ~ X = Product type marking code Suggested PAD Layout A MDLS SIZE (mm) (inch) A 1.50 0.059 B 1.80 0.071 C 1.20 0.047 D C D 5.40 0.213 B Standard Packaging Reel Case Type MDLS Qty Per Reel Reel Size (Pcs) (inch) 5,000 13 REV:B Page 4 QW-BBR77 Comchip Technology CO., LTD.