400 Watt, 5.85 - 6.425 GHz, CW traveling wave tube, coaxial input, waveguide output, air cooled. Custom configurations are also available. These variations in the performance and configuration include: mechanical configuration, electrical and RF connections, and dual-stage depressed collector. model Features •400 Watt • 5.85 GHz - 6.425 GHz •Coaxial Input •Waveguide Output •Weight: 16 lbs. •Air Cooled Frequency (GHz) VTC-6361H1 Power output (min) 5.85 - 6.425 400 W TYPICAL OPERATING PARAMeters MAXIMUMMINIMUM Filament Voltage:6.6 6.0 Filament Current: 5.0 --- Helix Voltage: 9.6 8.6 Helix Current: 20.0 --- Collector Voltage: 6.4 4.6 Filament Warm-up Time:--- 3.0 Drive Power: 20 --- Load VSWR: 1.7:1 --- Air Flow: --- 360 TYPICALUNITS --- Vdc ---A --- kV --- mAdc --- kVdc ---Minutes --- mW --- VSWR --- lb/hr The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, 607 Hansen Way, Palo Alto, CA 94303 telephone: 1(800) 414-8823. fax : (650) 856-0705 | email : [email protected] CPI0809 W, C-band helix twt series CPI | 400 4CW50,000J 400 W, C-Band Helix TWT Series