750 Watt, 7.9-8.4 GHz CW high efficiency traveling wave tube, coaxial input, waveguide output, conduction cooled or air cooled. Custom configurations are also available. These variations in the performance and configuration include: mechanical configuration, electrical and RF connections, and dual-stage depressed collector. Features •750 Watt •Coaxial Input •Waveguide Output •Weight: 8 lbs. max •Conduction Cooled or Air Cooled • Dual-Stage Collector model VTX-6361F1 VTX-6361P1 VTC-6362A4 Frequency Power output (GHz) (min) 7.9 - 8.4 7.9 - 8.4 7.9 - 8.4 750 W 750 W 750 W COOLING Conduction Air Conduction TYPICAL OPERATING PARAMeters MINIMUMMAXIMUM TYPICALUNITS Filament Voltage:6.2 6.4 6.3 Vdc Filament Current:1.0 1.8 1.4A Helix Voltage:10.5 11.5 11.0 kV Helix Current: --- 10 5.0 mA Collector Voltage 1:54 56 55 % Collector Current 1: --- 40 dc/320 rf 20 dc / 230 rf mA Collector Voltage 2:25 27 26 % Collector Current 2:--- 460 --- mA Cathode Warm-up Time:3.0 --- ---Minutes Drive Power:--- 20 17 dBm Baseplate Temp:--- 120 --- °C Prime Power: --- 2200 2100 Watts Load VSWR:--- 1.2:1 --- VSWR The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, 607 Hansen Way, Palo Alto, CA 94303 telephone: 1(800) 414-8823. fax : (650) 856-0705 | email : [email protected] cpI 060509 CPI CPI || 4CW50,000J 750 W, X-band helix twt series 750 W, X-Band Helix TWT Series