April 4, 2006 NT801-386 10 Base-T LAN Filter with CMC for Tx channel Features - Designed to meet 802.3 10 Base-T Specification - Low profile SMD package - Tape & Reel Available Electrical Specifications at 25°C Parameter Turns Ratio Specification 1CT : 1 ±5% 1CT : 1 ±5% Measured Pins (1-5-3) : (8-6) (16-12-14) : (9-11) Test Condition HP4284A HP4284A INSERTION LOSS 3-dB CUT-OFF FREQ. ATTENUATION 1 dB MAX 17 ± 1 MHz typ. 30 dB MIN 27 dB MIN Tx-Channel & Rx-Channel Tx-Channel & Rx-Channel Tx-Channel Tx-Channel HP8751A @1M - 10M Hz HP8751A, @ 3 d B HP8751A @ 30 MHz HP8751A @ 40 MHz 27 dB MIN Tx-Channel HP8751A @ 100 MHz RETURN LOSS 18 dB MIN 15 dB MIN Tx-Channel & Rx-Channel Tx-Channel & Rx-Channel HP8751A @ 5 - 10 MHz, 100 Ω HP8751A @ 5 - 10 MHz, 98 ± 13 Ω CMRR 40 dB MIN 30 dB MIN Tx-Channel Tx-Channel HP8751A @ 5 MHz HP8751A @ 10 MHz 50 dB MIN Tx-Channel HP8751A @ 50 MHz 45 dB MIN Tx-Channel HP8751A @ 100 MHz 30 dB MIN 1500 VAC Tx-Channel TO Rx-Channel (1,3,5,12,14,16) TO (6,8,9,11) HP8751A @ 5 - 10 MHz HI-POT TESTER CROSSTALK HIPOT Mechanical Outlines 0.040 (1.02) 1.000 MAX (25.4) 0.540 (13.7) DATATRONIC NT801-386 (DATE CODE) 0.090 (2.29) Recommended PAD layout Tx-Channel 1 8 0.100 (2.54) 0.018 (0.46) TYP 3 0.700 (17.78) 6 1CT: 1 5 0.380 (9.65) Rx-Channel 0.010 TYP (0.254) 0.230 (5.84) 0.100 (2.54) 0.700 (17.78) 16 0.040 (1.02) 9 Seating Plane 14 0.500 (12.7) 1CT: 1 11 12 Co-planarity: 0.004 (0.1) All dimensions are specified in inches (mm) Unless otherwise specified, tolerances are +/- 0.010 (0.25) Dimensions are exclusive of solder For non-RoHS parts consult factory for special part numbers. DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391, Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.