FEATURES / BENEFITS 586 Series SINGLE CHIP BASED LED T1 3/4 WEDGE (T5) RoHS Compliant High brightness with low current draw - uses up to 90% less energy than incandescent Long Life - up to 100K hours No heat generated Mounts directly into industry standard socket Resistant to shock and vibration Incorporating AlInGaP and InGaN technology Wide 100 degree viewing angle Colors include red, green, yellow, blue, and white Dialight's line of based LED lamps is designed to directly replace many popular subminiature and miniature incandescent lamps. The benefits of LED technology over incandescent are significant: They offer long life, are shock resistant, withstand vibration and provide energy conservation. SPECIFICATIONS .80 [20.2] Operating Voltages: 6, 14 and 28 VDC Operating temperature: -40oC to +80oC Storage temperature: -40oC to +100oC Replaces incandescent lamp numbers*: 79, 16, 84, 86, 18, 37, 70, 73, 74, 17, 85 .21 [5.3] Measurements are typical * See Dialight’s Incandescent lamp/based LED cross reference guide for a complete listing Dimensions are inches [mm] CONSIDERATIONS Since lens caps act as filters for the light emitted from the based LED, it is important to match the emitting color of the LED. If not matched properly, the overall light output may be substantially reduced. Dialight recommends using transparent lenses which will optimize the light output. Although these lamps can be operated at a lower voltage, which will increase the life, the intensity will be reduced. Operation of the based LED at a higher voltage should not exceed 10% above the recommended voltage. Dialight does not recommend that based LED lamps be used in neon sockets. Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEL586T5001_C 586 Series SINGLE CHIP BASED LED T1 3/4 WEDGE (T5) T1 3/4 WEDGE (T5) POLARIZED Color Dominant Wavelength (TYP- nm) Nominal Voltage (VDC) Forward Current TYP-(mA) Intensity TYP.-(mcd) RoHS Compliant 586-1A01-101F Red 630 6 16 775 586-1A02-101F Green 526 6 16 600 586-1A03-101F Yellow 592 6 16 775 586-1A04-101F Orange 615 6 16 775 586-1A05-101F Blue 472 6 16 165 586-1A06-101F White * 6 16 460 586-1A01-103F Red 630 14 16 775 586-1A02-103F Green 526 14 16 600 586-1A03-103F Yellow 592 14 16 775 586-1A04-103F Orange 615 14 16 775 586-1A05-103F Blue 472 14 16 165 586-1A06-103F White * 14 16 460 586-1A01-105F Red 630 28 16 775 586-1A02-105F Green 526 28 16 600 586-1A03-105F Yellow 592 28 16 775 586-1A04-105F Orange 615 28 16 775 586-1A05-105F Blue 472 28 16 165 586-1A06-105F White * 28 16 460 Part Number * Color Coordinates: x = 0.32, y = 0.32 Based LE Ds SELECTION With the technological advancements in Light Emitting Diodes (LEDs) brightness can now rival the incandescent lamp when used in similar packages. These advancements have created a new type of product called the based LED - an LED with the functionality of an incandescent bulb. The following styles are currently available in red, green, yellow, blue and white: T1 3/4 Midget Flange T1 3/4 Bi-Pin T1 3/4 Wedge (T5) T3 1/4 Miniature Bayonet (BA9s) T3 1/4 Miniature Screw (E10) T3 1/4 Wedge (T10) T2 Telephone Slide 15mm SC Bayonet (BA15s) Dialight’s line of based LEDs continues to grow. Please visit our website for more information. www.dialight.com Dialight reserves the right to make changes at any time in order to supply the best product possible. Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEL586T5001_C