Application: The first of its kind, the Dialight DuroSite® LED High Bay luminaire was designed specifically to replace conventional lighting in a wide variety of industrial applications, both indoor and outdoor. Its low profile, light weight design and versatile mounting options make it ideal for many applications such as for many applications such as high bay lighting, warehouse, factories, cold stores, restricted access areas, service areas and other applications with mounting heights greater than 4 meters. All of Dialight’s long life LED luminaires are designed to meet the most demanding specification criteria while offering maximum energy savings, reduced maintenance costs, and a superior quality of light. Hazardous area versions are also available. Mechanical Information DuroSite® Series LED High Bay Luminaire - CE Approved Fixture Weight: 8.2 kg (18 lbs) Mounting: Swivel bracket or hook (see page 2) 1 Fixing : (6) 1/4”-20 SELF TAPPING SCREW HOLE Factory installed 3 meter 3 core PVC cable Factory installed junction box (see ordering note, for mechanical drawing see page 4) Custom cable lengths available (consult factory) 47.75 [1.88] Electrical specifications Operating Voltage, Input Current, Power Consumption: See Table 174.75 [6.88] Operating Temp: -40°C to +65°C (-40°F to +149°F) Harmonics: EN 61000-3-2 Surge Protection: EN 61000-4-5 1 kV line to line 2 kV line to ground THD: <5% (120VAC) <10% (230/240VAC) <12% (277VAC) Power Factor: > 0.9 406.40 [16.00] 3.05m [10’] cord 49.53 [1.95] Construction 76.20 [3.00] 406.40 [16.00] 18-5/16” X .75” THREADED (2) Housing: LM6 marine grade aluminium Finish: Light grey powder coated (RAL7001) Lens: Acrylic (PMMA) Polycarbonate (PC) Tempered Glass Dimensions in mm [Inches] Certifications & Ratings: Photometric Information • CE - compliant EN 55015:2006 / EN 61547:2009 / EN 60598:2008 • BS EN 62471:2008 • Gost R approval • IEC60068 salt spray testing- severity 1 • IK10 to EN50102 (polycarbonate lens only) • IP66 to EN60529 CRI: > 70 CCT: 5,650K (cool white) 4,300K (neutral white) All values typical unless otherwise state Operating Voltage Input Wattage Input Current 277 134 0.5 230 137 0.6 200 137 0.7 150 139 0.9 120 141 1.2 100 144 1.4 All measurements taken at 25°C ambient, all values +/-15% Features & Benefits: • 5 year full performance warranty • Zone 1 hazardous area versions also available • May be used with remote occupancy sensor • Instant on/off operation • Superior colour rendition index compared to HPS, LPS, MV • Mercury free, lead free • Replaces up to 400 Watt HID light sources • Resistant to shock and vibration • Temperature compensation technology for longer life • L70 rated for 100,000 hours @ 25°C Order Codes: Lens 2 Part Number IP66 (Acrylic Lens) HBGC4P-EU HB6C4M-EU HB2C4M-EU HB7C4M-EU HB1C4N-EU HB6C4N-EU HB0C4M-EU HB4C4M-EU HB5C4N-EU HB3C4N-EU • • • • • IP66 to EN60529 (Polycarbonate Lens) (Tempered Glass Lens) • • • • • Optical Pattern 3 Clear • • • • • • Diffused Circular • • • • • • • • 1 • Aisle • • • • • CCT Cool Cool Cool Cool Cool Cool Cool Cool Cool Cool White White White White White White White White White White Initial Fixture Lumens 14,000 11,500 10,000 9,750 11,500 11,500 10,000 10,750 10,750 10,750 Lumens Per Watt4 90 82 71 70 82 82 71 77 77 77 Part numbers in the above table include 3M PVC cable, for units including an attached junction box replace prefix HB with HBJ in the order code, HB2C4M-EU becomes HBJ2C4M-EU. For mechanical drawing see page 4. 2 Circular optical pattern, polycarbonate lens part numbers can be ordered with a factory installed dome lens. For dome lens option ; replace 3rd numeral with L, HB2C4M-EU becomes HBLC4M-EU For mechanical drawing see page 4. 3 Part numbers in the above table are cool white models, for neutral white replace the 3rd character C with N in the order code, HB2C4M-EU becomes HB2N4M-EU 4 Lumens per Watt calutated based on 140W except for HBG2C4P-EU 5 HBG2C4P-EU is available in 230/240VAC only. Lumen values for HBG2C4P-EU is based on 156W @ 230 VAC, electrical specifications chart does not apply to this part number www.dialight.com DuroSite® Series LED High Bay Fixture Options and Accessories Variable Dimming Version: 0-10 VDC Application: Dialight offers a series of High Bay products with ACTIVE Dimming. Dimming permits the user to select a specific light output and power consumption to meet their requirements. The reduction in light output and power consumption are approximately proportional. Reducing the light output by 50% will reduce the power consumption by 50%. LEDs are particularly well suited for dimming as compared to other industrial light sources. (6) 1/4”-20 SELF TAPPING SCREW HOLE Mechanical, Electrical and Photometric information is the same as on page 1 except where detail is provided 47.75 [1.88] 1 Variable Dimming Cable : Dimming connections included in factory installed 5 core cable. Multiple high bays can be connected to the same dimmer, consult dimming instructions and manufacturer 174.75 [6.88] Variable Dimming Control: 406.40 [16.00] 0-10 VDC active Dimming Range 3.05m [10’] cord 49.53 [1.95] 10 VDC = 100% light output 0 VDC = 15% light output Features and Benefits • 3 meter, 5 core PVC cable pre-installed 76.20 [3.00] • Dimming cabling independent of fixture wiring 18-5/16” X .75” THREADED (2) 406.40 [16.00] • Multiple High Bays can be connected to the same dimmer Dimensions in mm [Inches] • May also be configured to operate in a single STEP Dimming configuration, please consult technical department STEP Dimming Mode The variable dimming High Bays may also be configured to operate in a single STEP Dimming configuration. When the dimming control conductors are connected together, the light output will be reduced to approximately 15% of the maximum light output. The total fixture power consumption will also be reduced to approximately 20% (30 W). Connecting the leads together can be accomplished with a common wall switch. Order Codes: Lens Optical Pattern 2 IP66 IP66 to EN60529 Part Number (Acrylic Lens) (Polycarbonate Lens) HB7C4M-EUD HB6C4N-EUD • • • • HB0C4M-EUD HB4C4M-EUD HB5C4N-EUD HB3C4N-EUD Clear • • HB2C4M-EUD HB1C4N-EUD 3 • • Diffused Circular • • • • • • • Aisle Cool White • • • • • • • 1 CCT • • Initial Fixture Lumens Lumens4 Per Watt 10,000 71 Cool White 9,750 70 Cool White 11,500 82 Cool White 11,500 82 Cool White 10,000 71 Cool White 10,750 77 Cool White 10,750 77 Cool White 10,750 77 Part numbers in the above table include 3M PVC cable, for units including an attached junction box replace prefix HB with HBJ in the order code, HB2C4M-EUD becomes HBJ2C4M-EUD. For mechanical drawing see page 4. 2 Polycarbonate lens part numbers can be ordered with a factory installed dome lens. For dome lens option replace prefix HB with HBL in the order code, HB2C4M-EUD becomes HBL2C4M-EUD For mechanical drawing see page 4. 3 Part numbers in the above table are cool white models, for neutral white replace the 3rd character C with N in the order code, HB2C4M-EUD becomes HB2N4M-EUD 4 Lumens per Watt calutated based on 140W. www.dialight.com DuroSite® LED High Bay Fixture Options and Accessories Occupancy Sensor Version Application: Dialight offers a series of High Bay products with an attached occupancy sensor. The occupancy sensor leverages the High Bay’s instant-on and instant-off capability to increase energy savings and enhance ROI. Other industrial lighting sources such as HID fixtures do not offer instant-on capability. Sensor can be programmed by the user during installation and commissioning via a IR remote control (sold separately), one remote can program an infinite number of luminaires. Mechanical, Electrical and Photometric information is the same as on page 1 except where detail is provided Gland entries (2) x M20 Weight: 8.6kg (19lbs) Sensor Mounting: Attached to the luminaire via a bracket, cable connected via junction box on the luminaire Sensor Timing 30 seconds to 20 minutes Sensor operation Dependant on application and height, please consult technical department Operating voltage 230/240 VAC only 290 151 80 413 Operating Temperature Dimensions in mm -10oC + 50oC (-14oF + 122oF) -25oC + 50oC (-13oF + 122oF) version available, consult factory Features and Benefits • No additional electrical connections required for installation Ordering Info: Part Number • Remote control for on site programming during commissioning Description HBX-RC IR remote control • Dimming option available please consult factory for details Lens Optical Pattern 1 Part Number IP66 IP66 to EN60529 (Acrylic Lens) (Polycarbonate Lens) HB7C4M-EUOS HB6C4N-EUOS • • • • HB0C4M-EUOS HB4C4M-EUOS HB5C4N-EUOS HB3C4N-EUOS Clear • • HB2C4M-EUOS HB1C4N-EUOS 2 • • Diffused Circular • • • • • • • Aisle • • • • • • • 1 • • CCT Initial Fixture Lumens Lumens Per Watt3 Cool White 10,000 71 Cool White 9,750 70 Cool White 11,500 82 Cool White 11,500 82 Cool White 10,000 71 Cool White 10,750 77 Cool White 10,750 77 Cool White 10,750 77 Polycarbonate lens part numbers can be ordered with a factory installed dome lens. For dome lens option replace prefix HB with HBL in the order code, HB2C4M-EUOS becomes HBL2C4M-EUOS For mechanical drawing see page 4. 2 Part numbers in the above table are cool white models, for neutral white replace the 3rd character C with N in the order code, HB2C4M-EUOS becomes HB2N4M-EUOS 3 Lumens per Watt calutated based on 140W. www.dialight.com DuroSite® Series LED High Bay Fixture Accessories Part Number Description Kit Includes HBXW3 Swivel Bracket Grey (RAL7001) powder coated aluminium (Interior or exterior use) Swivel Bracket Bracket to fixture hardware HBXH-EU Hook (IP40) HBXGS Glare Shield - sets of 10 Grey (RAL7001) powder coated spun aluminium (Interior use only, for use with flat lens options) Aluminium shield and securing hardware HBXREF2 558.8mm Acrylic Reflector (for use with HBXH only) Dust cover, clamp, space Hanger Hook Mechanical Drawings HBLXX4X - Dome Lens HBJXX4X - Junction Box 151 369,7 (14.55) 119,9 (4.72) 413 263,5 (10.37) HBXW3 - Swivel Bracket HBXX4X-EU Dimensions in mm [Inches] Polar Plots Circular Pattern Aisle Pattern Dialight reserves the right to make changes at any time in order to supply the best product possible. The most current version of this document will always be available at: www.dialight.com/Assets/Brochures_And_Catalogs/Illumination/MDEXHBEU001.pdf www.dialight.com MDEXHBEU001_E