FEATURES / BENEFITS POWERWHITE CIRCULAR LED MODULES PWMR/PWMRD p Utilizes 4 premium flux LUXEON® Rebel™ LEDs, 100+ lumens for cool white, 100+ lumens for neutral white and 50+ lumens for warm white p Allows for custom heatsink or fixture design p ETL recognized to UL standards (pending) p Available in choice of colours & colour temperatures p Quick connect terminal blocks for easy installation p >70% lumen maintenance @ 50,000 hours at max operating temperature. Better at lower operating temps! MATERIALS / FINISH APPLICATION p Spot lighting p Architectural lighting p Casing - ADC10 Aluminium Alloy p Accent lighting p Machine vision p Finish - Anodised Satin Silver p General illumination p Display cases p Connection - Cage Clamp Connectors p Interior use only p Optics - Dialight-Lumidrives Optics All applications require additional heatsink. For factory fitted heatsink see MR16 / MR16-LV datasheet. ORDERING INFORMATION p Lens Cover - Polycarbonate 143R p Rear Cover - Polycarbonate 143R MECHANICAL DIMENSIONS PWMRD-C1-AA-BB 35 [ 1.38 ] Typical Colour (AA) Temperature CW = 5000K – 6350K Options 37,44 [1.47] INPUT CONNECTOR 1.5mm² MAX CABLE 33,5 [ 1.32 ] Blank = no onboard NW = 3800K – 4100K driver WW = 2850K – 3250K Optic (BB) D = with onboard driver SP = 7 degree spot WD = 13 degree wide All angles are half divergence Dialight Europe Ltd Exning Road • Newmarket • Suffolk, United Kingdom, CB8 0AX Tel :+44 (0)1638 666541 • www.dialight.com Diameter x H 35.0mm x 37.5mm (1.38” x 1.48”) Maximum Cable Dia - 1.5mm2 / 16 AWG Dialight Corporation 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com MDEXLUMPWMR_A OPERATING CHARACTERISTICS Model / Colour Typical Total Lumen Output 350mA / LV 700mA PWMR / CW 400 720 PWMR / NW 400 720 PWMR / WW 200 380 PWMRD / CW 400 - PWMRD / NW 360 - PWMRD / WW 200 - Power Consumption Drive Current / Operating Current Input Voltage 350mA / LV 700mA mA 4.8W 9.6W 350 - 700 *13.5 -16VDC 5.0W - **300mA 24VDC Note: Lumen output based on manufacturers data *Based on max Vf of 4.0V **1.2A for initial switch on OPERATING CONDITIONS p Max case temp = 85ºC @ 350mA p PWMR requires constant current driver PWMRD requires constant voltage driver (See compatibility list) p Max drive current 700mA (constant current version) p Modules require additional heatsinking for lumen maintenance figures. p IP20 rating HEATSINK PERFORMANCE NOTE Any custom designed heatsink must maintain a maximum case temperature of 85ºC or less for the required working ambient temperature. COMPATIBLE DRIVERS PHOTOMETRIC DATA Relative Light Output Dialight Corporation Dialight Europe Ltd Exning Road • Newmarket • Suffolk, United Kingdom, CB8 0AX Degrees 1501 Route 34 South • Farmingdale, NJ 07727 USA Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com Tel :+44 (0)1638 666541 • www.dialight.com MDEXLUMPWMR_A Datasheet subject to change without notice. Please visit www. dialight.com for updates.