6A05 - 6A10 SILICON RECTIFIER DIODES D6 PRV : 50 - 1000 Volts Io : 6.0 Amperes FEATURES : * * * * * * High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Pb / RoHS Free 1.00 (25.4) MIN. 0.360 (9.1) 0.340 (8.6) 0.360 (9.1) 0.340 (8.6) MECHANICAL DATA : 1.00 (25.4) MIN. 0.052 (1.32) 0.048 (1.22) * Case : Void-free molded plastic body * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 2.1 grams Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. RATING SYMBOL 6A05 6A1 6A2 6A4 6A6 6A8 6A10 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage Maximum Average Forward Current 0.375"(9.5mm) Lead Length Ta = 60 °C Peak Forward Surge Current 8.3ms Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at IF = 6 A VDC 50 100 200 400 600 800 1000 V 6.0 A IFSM 400 A VF 0.95 1.0 V 5.0 µA IR(H) 1.0 mA CJ 150 pF RθJA 20 °C/W Junction Temperature Range TJ - 50 to + 150 °C Storage Temperature Range TSTG - 50 to + 150 °C Maximum DC Reverse Current at rated DC Blocking Voltage Ta = 25 °C IF(AV) Ta = 100 °C Typical junction capacitance at 4.0V, 1MHz Typical Thermal Resistance (1) IR Note : (1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted with 1.1” x 1.1” (30 x 30mm) copper pads Page 1 of 2 Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES ( 6A05 - 6A10 ) FIG.2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 600 6.0 60 Hz Resistive or Inductive Load PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG.1 - MAXIMUM FORWARD CURRENT DERATING CURRENT 5.0 4.0 3.0 1.1 x 1.1" (30 x 30 mm) Copper Pads 2.0 Standard P.C.B. Mounting 0.375"(9.5mm) Lead Length 1.0 0 500 400 300 TJ =150 °C 200 100 8.3ms SINGLE HALF SINE-WAVE (JEDEC) Method 0 0 25 50 75 100 125 150 175 1 AMBIENT TEMPERATURE, ( °C) 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FORWARD CHARACTERISTICS 100 10 Pulse Width = 300 µs 1% Duty Cycle 1.0 TJ = 25 °C 0.1 0.01 0 10 Ta = 100 °C 1.0 Ta = 25 °C 0.1 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS Page 2 of 2 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 100 1.8 2.0 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) Rev. 02 : March 25, 2005