SHEET 1 OF 1 12.70 [.500 in] SWITCH FUNCTION POS. 1 POS. 2 POS. 3 2 KEYWAY 5 11.43 [.450 in] ON NONE ON 2-3, 5-6 N/A 2-1, 5-4 1 3 1.02 [.040 in] 6 CIRCUIT: DPDT 6.10 [.240 in] .55 [.022 in] 4 n6.35 .71 [.028 in] n6.35 [.250 in] 2.92 n[.115 in] [.250 in] POS. 1 POS. 3 25~ .85 [.033 in] WITHOUT LOCING RING n2.38 [.094 in] WITH LOCKING RING 10.41 [.410 in] 1/4-40 UNS - 2A PANEL MOUNTING 8.89 [.350 in] E-SWITCH MARKING ON OPPOSITE SIDE NOTE: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=±0.4 X.XX=±0.25 3. TERMINAL NUMBERS FOR REF ONLY 4. CONTACT MATERIAL: SILVER 5. CONTCAT RATING: 2A @ 250VAC, 5A @ 120VAC OR 28 VDC 6. ELECTRIC LIFE: 40,000 MAKE-AND-BREAK CYCLES AT FULL LOAD. 7. CONTACT RESISTANCE: 10mΩ MAX. INITIAL @ 2-4VDC 8. INSULATION RESISTANCE: 1,000 MΩ MIN. 9. DIELECTRIC STRENGTH: 1,000 V RMS @SEA LEVEL. 10. OPERATING TEMP.: -30°C to 85°C 11. DENOTES CRITICAL PARAMETER. 12. 2002/95/EC (ROHS) COMPLIANT 13. HARDWARE TO BE SUPPLIED BULK: T100011 - LOCK WASHER QTY - 1 T100015 - LOCK RING QTY - 1 T100000 - HEX NUT QTY - 2 B 20170 REV PCR NO REVISED AND REDRAWN DESCRIPTION 1 2 3 DATE BY 6 TITLE SCALE EPOXY SEAL 2.03 [.080 in] 4.83 [.190 in] 4.70 [.185 in] BGL 3 1.52 [.060 in] .76 [.030 in] 9/21/11 THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED 8.89 [.350 in] 3.96 [.156 in] 100DP1T1B1M1QEH 2:1 DATE 9/21/2011 DR BGL DWG ST121005 REV B