EVERLIGHT 15-21-T1D-CP1Q2TY-2T

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
1206 Package Chip LED (1.0mm Height)
15-21/T1D-CP1Q2TY/2T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipmen
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS complaint version.
Descriptions
․The 15-21 SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
PART No.
15-21/T1D-CP1Q2TY/2T
Revision
Chip
Material
InGaN
Emitted Color
Resin Color
Pure White
Yellow Diffused
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-151-T06
Prepared date: 28-Dec-2006
:1
LifecyclePhase:
Rev 1
Page: 1 of 12
Prepared by: Linlin wu
Release Date:2008-09-20 00:16:10.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
1.4
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-151-T06
Prepared date: 28-Dec-2006
:1
LifecyclePhase:
Rev 1
Page: 2 of 12
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
IFP
100
mA
Power Dissipation
Pd
110
mW
Electrostatic Discharge(HBM)
ESD
150
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Peak Forward Current
(Duty 1/10 @1KHz)
Reflow Soldering : 260 ℃ for 10 sec.
Soldering Temperature
Tsol
Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Luminous Intensity
IV
45.0
-----
112
mcd
Viewing Angle
2θ1/2
-----
140
-----
deg
Forward Voltage
VF
2.60
-----
3.00
V
Reverse Current
IR
-----
-----
50
μA
Condition
IF=5mA
VR=5V
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Forward Voltage ±0.05V
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-151-T06
Prepared date: 28-Dec-2006
:1
LifecyclePhase:
Rev 1
Page: 3 of 12
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Bin Range Of Luminous Intensity
Bin
Min
Max
P1
45.0
57.0
P2
57.0
72.0
Q1
72.0
90.0
Q2
90.0
112
Unit
Condition
mcd
IF =5mA
Bin Range Of Forward Voltage
Group
Bin Code
Min.
Max.
28
2.60
2.70
29
2.70
2.80
30
2.80
2.90
31
2.90
3.00
T
Unit
Condition
V
IF =5mA
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Forward Voltage ±0.05V
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-151-T06
Prepared date: 28-Dec-2006
:1
LifecyclePhase:
Rev 1
Page: 4 of 12
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Chromaticity Coordinates Specifications for Bin Grading
Groups
Bin Code
1
2
C
3
4
CIE_x
CIE_y
Condition
0.274
0.274
0.294
0.294
0.274
0.274
0.294
0.294
0.294
0.294
0.314
0.314
0.294
0.294
0.314
0.314
0.226
0.258
0.286
0.254
0.258
0.291
0.319
0.286
0.254
0.286
0.315
0.282
0.286
0.319
0.347
0.315
IF= 5mA
Notes:
1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01).
2.The products are sensitive to static electricity and care must be fully taken when
handling products.
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-151-T06
Prepared date: 28-Dec-2006
:1
LifecyclePhase:
Rev 1
Page: 5 of 12
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
CIE Chromaticity Diagram
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-151-T06
Prepared date: 28-Dec-2006
:1
LifecyclePhase:
Rev 1
Page: 6 of 12
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Typical Electro-Optical Characteristics Curves
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-151-T06
Prepared date: 28-Dec-2006
:1
LifecyclePhase:
Rev 1
Page: 7 of 12
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Label explanation
CAT: Luminous Intensity Rank
HUE: Chromaticity Coordinates
REF: Forward Voltage Rank
RoHS
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-151-T06
Prepared date: 28-Dec-2006
:1
LifecyclePhase:
Rev 1
Page: 8 of 12
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Revision
Aluminum moisture-proof bag
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-151-T06
Prepared date: 28-Dec-2006
:1
LifecyclePhase:
Desiccant
Rev 1
Label
Page: 9 of 12
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Ac/Re
Items
Test Condition
1
Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec.
6 Min.
22 PCS.
0/1
Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles
22 PCS.
0/1
Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
2
3
High Temperature
Storage
Low Temperature
Storage
4
5
Revision
Test
Sample
Hours/Cycles
Size
No.
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-151-T06
Prepared date: 28-Dec-2006
:1
LifecyclePhase:
Rev 1
Page: 10 of 12
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 ℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-151-T06
Prepared date: 28-Dec-2006
:1
LifecyclePhase:
Rev 1
Page: 11 of 12
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Revision
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-151-T06
Prepared date: 28-Dec-2006
:1
LifecyclePhase:
Rev 1
Page: 12 of 12
Release Date:2008-09-20 00:16:10.0
Prepared by: Linlin wu
Expired Period: Forever