Technical Data Sheet 0402 Package Chip LED (0.2mm Height) 16-219A/T2D-AR2T1QY/3T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. ․The maximum height is 0.25mm Descriptions ․The 16-219A SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General Device Selection Guide Chip Part No. 16-219A/T2D-AR2T1QY/3T Resin Color Material Emitted Color InGaN Pure White Yellow Diffused Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 1 of 12 Device No. : DSE-0001281 Prepared date:26-Oct-2010 Prepared by: Jacky Wu 16-219A/T2D-AR2T1QY/3T Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 2 of 12 Device No. : DSE-0001281 Prepared date:26-Oct-2010 Prepared by: Jacky Wu 16-219A/T2D-AR2T1QY/3T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 10 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 20 mA Power Dissipation Pd 30 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity Iv 140 ---- 360 mcd Viewing Angle 2θ1/2 ---- 130 ---- deg Forward Voltage VF 2.7 ---- 3.2 V Reverse Current IR ---- ---- 50 μA Condition IF=5mA VR=5V Note : 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 3 of 12 Device No. : DSE-0001281 Prepared date:26-Oct-2010 Prepared by: Jacky Wu 16-219A/T2D-AR2T1QY/3T Bin Range Of Luminous Intensity Bin Min Max R2 140 180 S1 180 225 S2 225 285 T1 285 360 Unit Condition mcd IF=5mA Bin Range Of Forward Voltage Group Q Bin Min Max 29 2.70 2.80 30 2.80 2.90 31 2.90 3.00 32 3.00 3.10 33 3.10 3.20 Unit Condition V IF=5mA 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 4 of 12 Device No. : DSE-0001281 Prepared date:26-Oct-2010 Prepared by: Jacky Wu 16-219A/T2D-AR2T1QY/3T Chromaticity Coordinates Specifications for Bin Grading Group Bin Code 1 2 3 A 4 5 6 CIE_x 0.274 0.274 0.294 0.294 0.274 0.274 0.294 0.294 0.294 0.294 0.314 0.314 0.294 0.294 0.314 0.314 0.314 0.314 0.334 0.334 0.314 0.314 0.334 0.334 CIE_y 0.226 0.258 0.286 0.254 0.258 0.291 0.319 0.286 0.254 0.286 0.315 0.282 0.286 0.319 0.347 0.315 0.282 0.315 0.343 0.311 0.315 0.347 0.376 0.343 Condition IF=5mA Notes: 1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). 2.The products are sensitive to static electricity and care must be fully taken when handling products. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 5 of 12 Device No. : DSE-0001281 Prepared date:26-Oct-2010 Prepared by: Jacky Wu 16-219A/T2D-AR2T1QY/3T CIE Chromaticity Diagram Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 6 of 12 Device No. : DSE-0001281 Prepared date:26-Oct-2010 Prepared by: Jacky Wu 16-219A/T2D-AR2T1QY/3T Typical Electro-Optical Characteristics Curves Spectrum Distribution Forward Voltage Ta=25°C Relative luminous intensity (%) Forward Current FI (mA) Ta=25°C Wavelength λ (nm) Forward Voltage VF (V) Luminous Intensity vs. Forward Current Luminous Intensity vs. Ta=25°C Relative luminous intensity (% ) Relative luminous intensity (% ) Ambient Temperature Ambient Temperature Ta (°C) Radiation Diagram F I (mA) Ta=25°C Forward Current FI (mA) Forward Current Derating Curve Forward Current Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 7 of 12 Device No. : DSE-0001281 Prepared date:26-Oct-2010 Prepared by: Jacky Wu 16-219A/T2D-AR2T1QY/3T Label Explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS REF: Forward Voltage Rank XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 8 of 12 Device No. : DSE-0001281 Prepared date:26-Oct-2010 Prepared by: Jacky Wu 16-219A/T2D-AR2T1QY/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 9 of 12 Device No. : DSE-0001281 Prepared date:26-Oct-2010 Prepared by: Jacky Wu 16-219A/T2D-AR2T1QY/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Ac/Re Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 10sec. 2 H : +100℃ 15min Temperature Cycle ∫ 5 min 300 Cycles L : -40℃ 15min 6 Min. 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 300 Cycles Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 10 of 12 Device No. : DSE-0001281 Prepared date:26-Oct-2010 Prepared by: Jacky Wu 16-219A/T2D-AR2T1QY/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 26 0°C M ax . 10 sec. M ax. A bo ve25 5°C 3 0sec.M ax . 3°C /sec.M ax . 6°C /sec.M ax . P re-h eatin g A b o v e 2 1 7 °C 6 0~ 1 5 0sec. 1 50 ~ 20 0 °C 6 0 ~ 1 2 0 sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 11 of 12 Device No. : DSE-0001281 Prepared date:26-Oct-2010 Prepared by: Jacky Wu 16-219A/T2D-AR2T1QY/3T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 12 of 12 Device No. : DSE-0001281 Prepared date:26-Oct-2010 Prepared by: Jacky Wu