Technical Data Sheet Chip LED with Bi-Color(Multi-Color) 18-225/R6G6C-A01/3T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 18-225 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Type Material Emitted Color R6 AlGaInP Brilliant Red G6 AlGaInP Brilliant Yellow Green Resin Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 1 of 12 Device No:DSE-00005366 Prepared date: 05-Jul-2011 Prepared by: Ashley kuo 18-225/R6G6C-A01/3T Package Outline Dimensions 1.6 2 0.8 3 1 + 2 Red Blue 4 - + 1 Red Yellow Green Polarity 0.5 4 3 - Recommend Soldering Pad 0.5 0.4 4 1 3 2 0.4 0.8 0.5 0.4 0.3 0.15 0.32 0.32 0.4 0.7 Cathode Mark Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 2 of 12 Device No:DSE-00005366 Prepared date: 05-Jul-2011 Prepared by: Ashley kuo 18-225/R6G6C-A01/3T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Peak Forward Current (Duty 1/10 @1KHz) R6:25 mA G6:25 R6:60 IFP mA G6:60 R6:60 Power Dissipation Pd mW Electrostatic Discharge (HBM) ESD R6:2000 G6:2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol G6:60 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 3 of 12 Device No:DSE-00005366 Prepared date: 05-Jul-2011 Prepared by: Ashley kuo 18-225/R6G6C-A01/3T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Iv Min. R6 Luminous Intensity G6 2θ1/2 Viewing Angle λp 45.0 28.5 ----- R6 Peak Wavelength ----- G6 λd Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current 120 632 575 Unit Condition mcd IF=20mA ----- deg IF=20mA ----- nm IF=20mA nm IF=20mA 112.0 72.0 ----- 624 ----- G6 567.5 ----- 575.5 ----- 20 ----- nm IF=20mA 1.7 1.7 2.0 2.0 2.4 2.4 V IF=20mA ----- ----- 10 μA VR=5V R6 G6 IR ----- Max. R6 △λ VF Typ. Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 4 of 12 Device No:DSE-00005366 Prepared date: 05-Jul-2011 Prepared by: Ashley kuo 18-225/R6G6C-A01/3T R6 Bin Range Of Luminous Intensity Bin Min Max P1 45.0 57.0 P2 57.0 72.0 Q1 72.0 90.0 Q2 90.0 112.0 Unit Condition mcd IF=20mA Unit Condition mcd IF=20mA G6 Bin Range Of Luminous Intensity Bin Min Max N1 28.5 36.0 N2 36.0 45.0 P1 45.0 57.0 P2 57.0 72.0 G6 Bin Range Of Dom. Wavelength Group B Bin Min Max C15 567.5 569.5 C16 569.5 571.5 C17 571.5 573.5 C18 573.5 575.5 Unit Condition nm IF=20mA Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 5 of 12 Device No:DSE-00005366 Prepared date: 05-Jul-2011 Prepared by: Ashley kuo 18-225/R6G6C-A01/3T Typical Electro-Optical Characteristics Curves R6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 6 of 12 Device No:DSE-00005366 Prepared date: 05-Jul-2011 Prepared by: Ashley kuo 18-225/R6G6C-A01/3T Typical Electro-Optical Characteristics Curves G6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 7 of 12 Device No:DSE-00005366 Prepared date: 05-Jul-2011 Prepared by: Ashley kuo 18-225/R6G6C-A01/3T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS REF: Forward Voltage Rank XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 8 of 12 Device No:DSE-00005366 Prepared date: 05-Jul-2011 Prepared by: Ashley kuo 18-225/R6G6C-A01/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel - - + + Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 9 of 12 Device No:DSE-00005366 Prepared date: 05-Jul-2011 Prepared by: Ashley kuo 18-225/R6G6C-A01/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Max. 10sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 10 of 12 Device No:DSE-00005366 Prepared date: 05-Jul-2011 Prepared by: Ashley kuo 18-225/R6G6C-A01/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 26 0°C M ax . 10 sec. M ax. A bo ve25 5°C 3 0sec.M ax . 3°C /sec.M ax . 6°C /sec.M ax . P re-h eatin g A b o v e 2 1 7 °C 6 0~ 1 5 0sec. 1 50 ~ 20 0 °C 6 0 ~ 1 2 0 sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 11 of 12 Device No:DSE-00005366 Prepared date: 05-Jul-2011 Prepared by: Ashley kuo 18-225/R6G6C-A01/3T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 12 of 12 Device No:DSE-00005366 Prepared date: 05-Jul-2011 Prepared by: Ashley kuo