Technical Data Sheet Chip LED with Bi-Color(Multi-Color) 18-225A/R6GHW-B01/3T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 18-225A SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Type Material Emitted Color R6 AlGaInP Brilliant Red GH InGaN Brilliant Green Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0000996 Prepared date: 19-Dec-2008 Revision :1 LifecyclePhase: Resin Color White Diffused Rev 1 Page: 1 of 12 Prepared by: Ashley Kuo Release Date:2009-03-05 23:40:59.0 Expired Period: Forever 18-225A/R6GHW-B01/3T Package Outline Dimensions 1.6 4 0.8 2 4 - + 2 Red 3 - + 1 Green Polarity 1 0.5 3 For Reflow Soldering(Propose) 0.7 0.4 0.3 0.4 0.8 0.5 0.5 Cathode Mark Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0000996 Prepared date: 19-Dec-2008 Revision :1 LifecyclePhase: Rev 1 Page: 2 of 12 Prepared by: Ashley Kuo Release Date:2009-03-05 23:40:59.0 Expired Period: Forever 18-225A/R6GHW-B01/3T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Peak Forward Current (Duty 1/10 @1KHz) R6:25 mA GH:25 R6:60 IFP mA GH:100 R6:60 Power Dissipation Pd mW Electrostatic Discharge (HBM) ESD R6:2000 GH:150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol GH:110 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0000996 Prepared date: 19-Dec-2008 Revision :1 LifecyclePhase: Rev 1 Page: 3 of 12 Prepared by: Ashley Kuo Release Date:2009-03-05 23:40:59.0 Expired Period: Forever 18-225A/R6GHW-B01/3T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Iv Min. R6 Luminous Intensity GH 2θ1/2 Viewing Angle λp Typ. 28.5 72 ----- R6 Peak Wavelength ----- GH λd Dominant Wavelength △λ Spectrum Radiation Bandwidth 632 518 Condition mcd IF=10mA deg IF=10mA nm IF=10mA nm IF=10mA ----- nm IF=10mA 72 180 --------- ----- 624 ----- GH 520 ----- 535 R6 VF R6 GH IR R6 Reverse Current 130 Unit R6 ----- GH Forward Voltage ----- Max. GH 20 35 1.7 2.7 2.0 3.3 2.4 3.7 V IF=10mA ----- ----- 10 50 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0000996 Prepared date: 19-Dec-2008 Revision :1 LifecyclePhase: Rev 1 Page: 4 of 12 Prepared by: Ashley Kuo Release Date:2009-03-05 23:40:59.0 Expired Period: Forever 18-225A/R6GHW-B01/3T R6 Bin Range Of Luminous Intensity Bin Min Max N 28.5 45 P 45 72 Unit Condition mcd IF=10mA Unit Condition mcd IF=10mA Unit Condition nm IF=10mA GH Bin Range Of Luminous Intensity Bin Min Max Q1 72 90 Q2 90 112 R1 112 140 R2 140 180 Bin Range Of Dom. Wavelength Bin Min Max 1 520 525 2 525 530 3 530 535 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0000996 Prepared date: 19-Dec-2008 Revision :1 LifecyclePhase: Rev 1 Page: 5 of 12 Prepared by: Ashley Kuo Release Date:2009-03-05 23:40:59.0 Expired Period: Forever 18-225A/R6GHW-B01/3T Typical Electro-Optical Characteristics Curves R6 Forward Current vs. Forward Voltage Ta=25°C 75 50 25 0 500 1000 550 600 650 Wavelength λ (nm) 40 30 25 20 10 0 1.2 700 Luminous Intensity vs. Luminous Intensity vs. Forward Current 100 10 1 -60 -40 -20 0 100 20 40 60 80 100 10 1 0 10 Forward Current IF (mA) 10 1 10 2 Forward Current IF (mA) Radiation Diagram 0° 10° 50 Ta=25°C 20° 30° 40 30 25 40° 1.0 20 10 0 0.9 50° 0.8 60° 70° 0.7 20 0 40 60 85 100 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0000996 Prepared date: 19-Dec-2008 LifecyclePhase: Ta=25°C 1000 Forward Current Derating Curve :1 1.6 2.0 2.4 2.8 3.0 Forward Voltage V F (V) Ambient Temperature Ambient Temperature Ta (°C) Revision Ta=25°C 50 Forward Current IF (mA) 100 Relative luminous intensity (%) Relative luminous intensity (%) Relative luminous intensity (%) Spectrum Distribution 80° 90° 0.5 0.3 0.1 0.2 0.4 Rev 1 0.6 Page: 6 of 12 Prepared by: Ashley Kuo Release Date:2009-03-05 23:40:59.0 Expired Period: Forever 18-225A/R6GHW-B01/3T Typical Electro-Optical Characteristics Curves GH I (mA) 40 F 75 50 25 0 400 450 500 550 30 25 20 10 0 2.6 600 Luminous Intensity vs. Relative luminous intensity (%) Ambient Temperature 1000 100 10 1 -60 -40 -20 0 20 3.0 3.4 1000 f=1KHz Duty=1/10 10 1 10 40 60 80 100 10 10 Forward Current IF(mA) IF(mA) Forward Current Ta=25°C Radiation Diagram 0° 50 10° 20° 30° 40 40° 30 25 1.0 20 0.9 50° 0.8 60° 10 70° 0.7 0 20 0 40 60 85 100 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0000996 Prepared date: 19-Dec-2008 LifecyclePhase: 4.5 100 Forward Current Derating Curve :1 4.2 Luminous Intensity vs Forward Current Ta=25°C Ambient Temperature Ta (°C) Revision 3.8 Forward Voltage V F (V) W avelength λ (nm) Relative luminous intensity (%) Forward Current vs. Forward Voltage Ta=25°C 50 100 Forward Current Relative luminous intensity (%) Spectrum Distribution Ta=25°C 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Rev 1 Page: 7 of 12 Prepared by: Ashley Kuo Release Date:2009-03-05 23:40:59.0 Expired Period: Forever 18-225A/R6GHW-B01/3T Label Explanation CAT: Luminous Intensity Rank Pb HUE: Dom. Wavelength Rank CPN : P N : XXXXXXXXXXXXX REF: Forward Voltage Rank XXXXXXXXXXXXX EVERLIGHT RoHS CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0000996 Prepared date: 19-Dec-2008 Revision :1 LifecyclePhase: Rev 1 Page: 8 of 12 Prepared by: Ashley Kuo Release Date:2009-03-05 23:40:59.0 Expired Period: Forever 18-225A/R6GHW-B01/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel - - + + Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0000996 Prepared date: 19-Dec-2008 Revision :1 LifecyclePhase: Desiccant Label Rev 1 Page: 9 of 12 Prepared by: Ashley Kuo Release Date:2009-03-05 23:40:59.0 Expired Period: Forever 18-225A/R6GHW-B01/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Ac/Re Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 High Temperature Storage Low Temperature Storage 4 5 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0000996 Prepared date: 19-Dec-2008 Revision Test Sample Hours/Cycles Size No. :1 LifecyclePhase: Rev 1 Page: 10 of 12 Prepared by: Ashley Kuo Release Date:2009-03-05 23:40:59.0 Expired Period: Forever 18-225A/R6GHW-B01/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0000996 Prepared date: 19-Dec-2008 Revision :1 LifecyclePhase: Rev 1 Page: 11 of 12 Prepared by: Ashley Kuo Release Date:2009-03-05 23:40:59.0 Expired Period: Forever 18-225A/R6GHW-B01/3T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No:DSE-0000996 Prepared date: 19-Dec-2008 Revision :1 LifecyclePhase: Rev 1 Page: 12 of 12 Prepared by: Ashley Kuo Release Date:2009-03-05 23:40:59.0 Expired Period: Forever