EVERLIGHT 19-217-T1D-JP1Q2QY-3T

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
0603 Package Chip LED (0.4mm Height)
19-217/T1D-JP1Q2QY/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain with in RoHS compliant version
Descriptions
․The 19-217 SMD LED is much smaller than lead
frame type components, thus enable smaller
board size, higher packing density, reduced
storage space and finally smaller equipment to be
obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Part No.
19-217/T1D-JP1Q2QY/3T
Revision
Chip
Material
Emitted Color
Resin Color
Pure White
Yellow Diffused
InGaN
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-197-T22
Prepared date: 13-Jul-2007
:1
LifecyclePhase:
Rev 1
Page: 1 of 12
Prepared by: Pengchunya
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/T1D-JP1Q2QY/3T
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-197-T22
Prepared date: 13-Jul-2007
:1
LifecyclePhase:
Rev 1
Page: 2 of 12
Prepared by: Pengchunya
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/T1D-JP1Q2QY/3T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
IFP
100
mA
Power Dissipation
Pd
110
mW
Electrostatic Discharge(HBM)
ESD
150
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Soldering Temperature
Tsol
Peak Forward Current
(Duty 1/10 @1KHz)
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Luminous Intensity
IV
45.0
-----
112
mcd
Viewing Angle
2θ1/2
-----
130
-----
deg
Forward Voltage
VF
2.70
-----
3.20
V
Reverse Current
IR
-----
-----
50
μA
Condition
IF=5mA
VR=5V
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Forward Voltage ±0.05V
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-197-T22
Prepared date: 13-Jul-2007
:1
LifecyclePhase:
Rev 1
Page: 3 of 12
Prepared by: Pengchunya
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/T1D-JP1Q2QY/3T
Bin Range Of Luminous Intensity
Bin Code
Min.
Max.
P1
45.0
57.0
P2
57.0
72.0
Q1
72.0
90.0
Q2
90.0
112
Unit
Condition
mcd
IF=5mA
Unit
Condition
V
IF=5mA
Bin Range Of Forward Voltage
Symbol
Bin Code
Q
Min.
Max.
29
2.70
2.80
30
2.80
2.90
31
2.90
3.00
32
3.00
3.10
33
3.10
3.20
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Forward Voltage ±0.05V
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-197-T22
Prepared date: 13-Jul-2007
:1
LifecyclePhase:
Rev 1
Page: 4 of 12
Prepared by: Pengchunya
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/T1D-JP1Q2QY/3T
Chromaticity Coordinates Specifications for Bin Grading
Groups
Bin Code
X4
X3
J
X2
X1
CIE_x
CIE_y
0.234
0.202
0.234
0.235
0.254
0.263
0.254
0.230
0.234
0.170
0.234
0.202
0.254
0.230
0.254
0.198
0.254
0.230
0.254
0.263
0.274
0.291
0.274
0.258
0.254
0.198
0.254
0.230
0.274
0.258
0.274
0.226
Condition
IF=5mA
Notes:
1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01).
2.The products are sensitive to static electricity and care must be fully taken when
handling products.
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-197-T22
Prepared date: 13-Jul-2007
:1
LifecyclePhase:
Rev 1
Page: 5 of 12
Prepared by: Pengchunya
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/T1D-JP1Q2QY/3T
CIE Chromaticity Diagram
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-197-T22
Prepared date: 13-Jul-2007
:1
LifecyclePhase:
Rev 1
Page: 6 of 12
Prepared by: Pengchunya
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/T1D-JP1Q2QY/3T
Typical Electro-Optical Characteristics Curves
S p e c tru m D is trib u tio n
F o rw a rd C u rre n t v s.
F o rw a rd V o lta g e
T a = 2 5 °C
Forward Current
75
50
25
0
400
500
600
700
40
30
20
10
0
2 .6
800
W a v e le n g th λ (n m )
F o rw a rd C u rre n t
A m b ie n t T e m p e ra tu re
Relative luminous intensity (%)
1000
100
10
1
-6 0 -4 0 -2 0
0
20
40
3 .0
3 .4
3 .8
4 .2
4 .5
F o rw a rd V o lta g e (VF)-v o lts
L u m in o u s In te n s ity v s
L u m in o u s In te n s ity v s.
Relative luminous intensity (%)
T a = 2 5 °C
50
IF (mA)
Relative luminous intensity (%)
100
60
80 100
1000
T a = 2 5 °C
f= 1 K H z
D u ty= 1 /1 0
100
10
1 0
10
1
10
2
10
F o rw a rd C u rre n t I F (m A )
A m b ie n t T e m p e ra tu re T a (°C )
R a d ia tio n D ia g ra m
F o rw a rd C u rre n t D e ra tin g C u rv e
T a = 2 5 °C
Forward Current I (mA)
F
50
40
30
25
20
10
0
Revision
20
0
40
60
85
A m b ie n t T e m p e ra tu re Ta (°C )
100
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-197-T22
Prepared date: 13-Jul-2007
:1
LifecyclePhase:
Rev 1
Page: 7 of 12
Prepared by: Pengchunya
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/T1D-JP1Q2QY/3T
Label explanation
CAT: Luminous Intensity Rank
HUE: Chromaticity Coordinates
REF: Forward Voltage Rank
RoHS
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-197-T22
Prepared date: 13-Jul-2007
:1
LifecyclePhase:
Rev 1
Page: 8 of 12
Prepared by: Pengchunya
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/T1D-JP1Q2QY/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Moisture Resistant Packaging
Label
Revision
Aluminum moisture-proof bag
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-197-T22
Prepared date: 13-Jul-2007
:1
LifecyclePhase:
Desiccant
Rev 1
Label
Page: 9 of 12
Prepared by: Pengchunya
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/T1D-JP1Q2QY/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Ac/Re
Items
Test Condition
1
Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec.
6 Min.
22 PCS.
0/1
Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles
22 PCS.
0/1
Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
2
3
High Temperature
Storage
Low Temperature
Storage
4
5
Revision
Test
Sample
Hours/Cycles
Size
No.
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-197-T22
Prepared date: 13-Jul-2007
:1
LifecyclePhase:
Rev 1
Page: 10 of 12
Prepared by: Pengchunya
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/T1D-JP1Q2QY/3T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Revision
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-197-T22
Prepared date: 13-Jul-2007
:1
LifecyclePhase:
Rev 1
Page: 11 of 12
Prepared by: Pengchunya
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever
EVERLIGHT ELECTRONICS CO.,LTD.
19-217/T1D-JP1Q2QY/3T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Revision
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No:SZDSE-197-T22
Prepared date: 13-Jul-2007
:1
LifecyclePhase:
Rev 1
Page: 12 of 12
Prepared by: Pengchunya
Release Date:2008-09-20 00:16:11.0
Expired Period: Forever