EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 3mm Power LED 38-01-A74-YSC-A2T1U1DH-AM Feature ‧ ‧ ‧ ‧ ‧ ‧ ‧ RoHS compliant. Piranha package. Colorless clear resin. Low thermal resistance. Packaged in tubes for automatic insertion equipment. Total flux: 7150 to 14250 mlm at 70mA. Qualification according to AEC-Q101. This is a preliminary specification intended for design purposes and subject to change without prior notice. Applications ‧ Automotive Lighting ‧ Electronic signs and signals ‧ General lighting application Device Selection Guide Chip Material Emitted Color Resin Color Yellow Water Clear AlGaInP Everlight Electronics Co., Ltd. http://www.everlight.com Rev.: Device No.: Published date: 25-June.-2009 Created by: Revision :1 LifecyclePhase: DPE-0000136 1 Page: 1 of 12 Vicky Feng Release Date:2009-07-10 21:51:49.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 3mm Power LED 38-01-A74-YSC-A2T1U1DH-AM Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 70 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 160 mA Power Dissipation Pd 220 mW Junction Temperature Tj 115 ℃ Operating Temperature Topr -40 ~ +100 ℃ Storage Temperature Tstg -40 ~ +110 ℃ Thermal Resistance Rth J-A 150 K/W ESDHBM 2000 V ESDMM 200 V ESD (Classification acc. AEC Q101) Soldering Temperature Tsol Wave Soldering : 260 ℃ for 5 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.: Device No.: Published date: 25-June.-2009 Created by: Revision :1 LifecyclePhase: DPE-0000136 1 Page: 2 of 12 Vicky Feng Release Date:2009-07-10 21:51:49.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 3mm Power LED 38-01-A74-YSC-A2T1U1DH-AM Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Total Flux Φv 7150 --- 14250 mlm IF =70mA Viewing Angle 2θ1/2 --- 35 --- deg IF =70mA Peak Wavelength λp --- 592 --- nm IF =70mA Dominant Wavelength λd 586 --- 594 nm IF =70mA Spectrum Radiation Bandwidth Δλ --- 15 --- nm IF =70mA Forward Voltage VF 1.9 --- 2.9 V IF =70mA Reverse Current IR --- --- 10 μA VR =5V Note: 1. Tolerance of Total Flux: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.: Device No.: Published date: 25-June.-2009 Created by: Revision :1 LifecyclePhase: DPE-0000136 1 Page: 3 of 12 Vicky Feng Release Date:2009-07-10 21:51:49.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 3mm Power LED 38-01-A74-YSC-A2T1U1DH-AM Bin Range of Forward Voltage (Ta=25℃) Bin Code Min. Max. 1 1.9 2.1 2 2.1 2.3 3 2.3 2.5 4 2.5 2.7 5 2.7 2.9 Unit Condition V IF =70mA Unit Condition nm IF =70mA Unit Condition mlm IF =70mA Note: Tolerance of Forward Voltage: ±0.1V Bin Range of Dominant Wavelength (Ta=25℃) Bin Code Min. Max. 1 586 590 2 590 594 Note: Tolerance of Dominant Wavelength: ±1nm Bin Range of Total Flux (Ta=25℃) Bin Code Min. Max. T1 7150 9000 T2 9000 11250 U1 11250 14250 Note: Tolerance of Total Flux: ±11% Everlight Electronics Co., Ltd. http://www.everlight.com Rev.: Device No.: Published date: 25-June.-2009 Created by: Revision :1 LifecyclePhase: DPE-0000136 1 Page: 4 of 12 Vicky Feng Release Date:2009-07-10 21:51:49.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 3mm Power LED 38-01-A74-YSC-A2T1U1DH-AM Typical Electro-Optical Characteristics Curves Typical Curve of Spectral Distribution Relative Intensity (%) 100% 50% 0% 400 450 500 550 600 650 700 Wavelength (nm) Note: V(λ)=Standard eye response curve; IF =20mA Diagram Characteristics of Radiation 0 1.0 0 10 0 20 0 Relative Intensity (a.u.) 30 0 40 0.8 0 50 0 0.6 60 0.4 70 0.2 0.0 0 -90 0 0 80 0 90 -70 0 -50 0 -30 0 -10 0 0 View Angle (degree) Everlight Electronics Co., Ltd. http://www.everlight.com Rev.: Device No.: Published date: 25-June.-2009 Created by: Revision :1 LifecyclePhase: DPE-0000136 1 Page: 5 of 12 Vicky Feng Release Date:2009-07-10 21:51:49.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 3mm Power LED 38-01-A74-YSC-A2T1U1DH-AM Forward Current vs. Forward Voltage (Ta=25℃) Dominant Wavelength vs. Forward Current (Ta=25℃) 100 597 Dominant Wavelength (nm) 90 Forward Current (mA) 80 70 60 50 40 30 20 10 596 595 594 593 592 591 590 0 1.7 1.9 2.1 2.3 2.5 0 2.7 10 20 30 40 50 60 70 80 90 100 Forward Voltage (V) Forward Current (mA) Relative Luminous Intensity vs. Forward Current (Ta=25℃) Max. Permissible Forward Current vs. Ambient Temperature 100 1.2 Forward Current (mA) Relative Luminous Intensity (a.u.) 1.5 0.9 0.6 0.3 80 60 40 20 0.0 0 0 10 20 30 40 50 60 70 80 90 100 0 20 Forward Current (mA) http://www.everlight.com Rev.: Device No.: Published date: 25-June.-2009 Created by: Revision :1 LifecyclePhase: 60 80 100 120 Ambient Temperature (℃) Everlight Electronics Co., Ltd. DPE-0000136 40 1 Page: 6 of 12 Vicky Feng Release Date:2009-07-10 21:51:49.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 3mm Power LED 38-01-A74-YSC-A2T1U1DH-AM Package Dimension Notes: 1. An epoxy meniscus may extend about 1.5mm(0.059") down the leads 2. Tolerances unless dimensions ±0.25mm 3. All dimensions are in millimeters Everlight Electronics Co., Ltd. http://www.everlight.com Rev.: Device No.: Published date: 25-June.-2009 Created by: Revision :1 LifecyclePhase: DPE-0000136 1 Page: 7 of 12 Vicky Feng Release Date:2009-07-10 21:51:49.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 3mm Power LED 38-01-A74-YSC-A2T1U1DH-AM Antistic Packing Materials Tube Label area PART NO: QTY: LOT NO: CAT: Tube Label Explanation ‧ PART NO: Product Number ‧ QTY: Packing Quantity ‧ LOT No: Lot Number ‧ CAT: Rank of (VF)(Note*)(ΦV) Note: λd/CIE/Color temperature Note: Tolerances unless mentioned ±2.0mm. Unit = mm Standard Box Tube Label Explanation ‧ CPN: Customer’s Product Number ‧ P/N: Product Number ‧ QTY: Packing Quantity ‧ CAT: Rank of (VF)(Note*)(ΦV) ‧ Note: λd/CIE/Color temperature ‧ HUE/REF: Reference ‧ LOT No: Lot Number Note: Tolerances unless mentioned ±3.0mm. Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.: Device No.: Published date: 25-June.-2009 Created by: Revision :1 LifecyclePhase: DPE-0000136 1 Page: 8 of 12 Vicky Feng Release Date:2009-07-10 21:51:49.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 3mm Power LED 38-01-A74-YSC-A2T1U1DH-AM Packing Quantity Packing material Length × Width × height (mm) Tube Quantity (Pcs) LED Quantity (Pcs) Tube 485 x 9.5 x 1 60 Standard box 510 x 100 x 45 30 1800 Large box 510 x 150 x 90 105 6300 Note: 1. Normal packing specification is use standard box, unless already defined initially. 2. Vacuum packing with anti-static bag after packing in standard box. 3. Specifications are subject to change without prior notice. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.: Device No.: Published date: 25-June.-2009 Created by: Revision :1 LifecyclePhase: DPE-0000136 1 Page: 9 of 12 Vicky Feng Release Date:2009-07-10 21:51:49.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 3mm Power LED 38-01-A74-YSC-A2T1U1DH-AM Notes 1. Lead Forming During lead formation, the leads should be bent at a point at least 3mm from the base of the epoxy bulb. Lead forming should be done before soldering. Avoid stressing the LED package during leads forming. The stress to the base may damage the LED’s characteristics or it may break the LEDs. Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures may cause failure of the LEDs. When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the lead position of the LED. If the LEDs are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the LEDs. 2. Storage The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from Everlight and the storage life limits are 3 months. If the LEDs are stored for 3 months or more, they can be stored for a year in a sealed container with a nitrogen atmosphere and moisture absorbent material. Please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can occur. 3. Soldering Careful attention should be paid during soldering. Solder the LED no lower than 1.6mm from the base of stopper is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering DIP Soldering Temp. at tip of iron 300℃ Max. (30W Max.) Preheat temp. 100℃ Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. 260 Max. Distance No lower than 1.6mm from Bath time. 5 sec Max. Distance No lower than 1.6mm from the base of stopper the base of stopper Everlight Electronics Co., Ltd. http://www.everlight.com Rev.: Device No.: Published date: 25-June.-2009 Created by: Revision :1 LifecyclePhase: DPE-0000136 1 Page: 10 of 12 Vicky Feng Release Date:2009-07-10 21:51:49.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 3mm Power LED 38-01-A74-YSC-A2T1U1DH-AM Dip and hand soldering should not be done more than one time. After soldering the LEDs, the epoxy bulb should be protected from mechanical shock or vibration until the LEDs return to room temperature. A rapid-rate process is not recommended for cooling the LEDs down from the peak temperature. Although the recommended soldering conditions are specified in the above table, dip or handsoldering at the lowest possible temperature is desirable for the LEDs. Wave soldering parameter must be set and maintain according to recommended temperature and dwell time in the solder wave. 4. Cleaning When necessary, cleaning should occur only with isopropyl alcohol at room temperature for a duration of no more than one minute. Dry at room temperature before use. Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence of ultrasonic cleaning on the LEDs depends on factors such as ultrasonic power and the assembled condition. Ultrasonic cleaning shall be pre-qualified to ensure this will not cause damage to the LED 5. Heat Management Heat management of LEDs must be taken into consideration during the design stage of LED application. The current should be de-rated appropriately by referring to the de-rating curve found in each product specification. The temperature surrounding the LED in the application should be controlled. Please refer to the data sheet de-rating curve. 6. ESD (Electrostatic Discharge) Electrostatic discharge (ESD) or surge current (EOS) can damage LEDs. An ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling LEDs. All devices, equipment and machinery must be properly grounded. Use ion blower to neutralize the static charge which might have built up on surface of the LEDs plastic lens as a result of friction between LEDs during storage and handing. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.: Device No.: Published date: 25-June.-2009 Created by: Revision :1 LifecyclePhase: DPE-0000136 1 Page: 11 of 12 Vicky Feng Release Date:2009-07-10 21:51:49.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 3mm Power LED 38-01-A74-YSC-A2T1U1DH-AM 7. Other Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.: Device No.: Published date: 25-June.-2009 Created by: Revision :1 LifecyclePhase: DPE-0000136 1 Page: 12 of 12 Vicky Feng Release Date:2009-07-10 21:51:49.0 Expired Period: Forever