4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL825 Series Features: • Current transfer ratio (CTR: 600~7500% at I F =1mA, V CE =2V) • High isolation voltage between input and output (Viso=5000 V rms ) • Creepage distance >7.62 mm • Operating temperature up to +110°C • Compact small outline package • Pb free and RoHS compliant. • UL approved (No. E214129) • VDE approved (No. 132249) • SEMKO approved • NEMKO approved • DEMKO approved • FIMKO approved • CSA approved • CQC approved Description The EL825 series devices each consists of an infrared emitting diodes, optically coupled to a Darlington phototransistor detector. These devices are packaged in an 8-pin DIP package and available in wide-lead spacing and SMD option. Applications Schematic • Telephone set, telephone exchangers • Sequence controllers • System appliances, measuring instruments • Signal transmission between circuits of different potentials and impedances 1 8 2 7 3 6 4 5 Pin Configuration 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector Everlight Electronics Co., Ltd. Document No：DPC-0000025 1 Rev. 2 http://www.everlight.com December 28, 2009 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL825 Series Absolute Maximum Ratings (T a =25°C) Parameter Symbol Rating Unit Forward current IF 60 mA Peak forward current (1us, pulse) I FP 1 A Reverse voltage VR 6 V PD 100 mW 150 mW 5.8 mW/°C IC 80 mA Collector-Emitter voltage V CEO 40 V Emitter-Collector voltage V ECO 7 V Total power dissipation P TOT 200 mW Isolation voltage *1 V ISO 5000 V rms Operating temperature T OPR -55 ~ +110 °C Storage temperature T STG -55 ~ +125 °C Soldering temperature *2 T SOL 260 °C Input Power dissipation No derating required up to T a = 100°C Power dissipation PC Derating factor (above T a = 80°C) Output Collector current Notes *1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1 & 2 are shorted together, and pins 3 & 4 are shorted together. *2 For 10 seconds. Everlight Electronics Co., Ltd. Document No：DPC-0000025 2 Rev. 2 http://www.everlight.com December 28, 2009 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL825 Series Electrical Characteristics (T a =25°C unless specified otherwise) Input Parameter Symbol Min. Typ.* Max. Unit Condition Forward voltage VF - 1.2 1.4 V I F = 20mA Reverse current IR - - 10 µA V R = 4V Input capacitance C in - 30 250 pF V = 0, f = 1kHz Symbol Min. Typ.* Max. Unit I CEO - - 1 µA V CE = 10V, I F = 0mA Collector-Emitter breakdown voltage BV CEO 40 - - V I C = 0.1mA Emitter-Collector breakdown voltage BV ECO 7 - - V I E = 0.01mA Output Parameter Collector-Emitter dark current Condition Transfer Characteristics (T a =25°C unless specified otherwise) Parameter Symbol Min. Typ.* Max. Unit CTR 600 - 7500 % I F = 1mA ,V CE = 2V V CE(sat) - 0.8 1.0 V I F = 20mA ,I C = 5mA Isolation resistance R IO 5×1010 - - Ω V IO = 500Vdc, 40~60% R.H. Floating capacitance C IO - 0.6 1.0 pF V IO = 0, f = 1MHz fc - 6 - kHz Current Transfer ratio Collector-Emitter saturation voltage Cut-off frequency Rise time tr - 60 300 µs Fall time tf - 53 250 µs Condition V CE = 5V, I C = 2mA R L = 100Ω, -3dB V CE = 2V, I C = 10mA, R L = 100Ω * Typical values at T a = 25°C Everlight Electronics Co., Ltd. Document No：DPC-0000025 3 Rev. 2 http://www.everlight.com December 28, 2009 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL825 Series Typical Performance Curves Everlight Electronics Co., Ltd. Document No：DPC-0000025 4 Rev. 2 http://www.everlight.com December 28, 2009 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL825 Series V CC Input Pulse IF IC RL Output 10% Output Pulse Input R IN 90% tr ton tf toff Figure 7. Switching Time Test Circuit & Waveforms Everlight Electronics Co., Ltd. Document No：DPC-0000025 5 Rev. 2 http://www.everlight.com December 28, 2009 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL825 Series Order Information Part Number EL825(X)(Z)-V Note X Z V = Lead form option (S, S1, M or none) = Tape and reel option (TA, TB or none). = VDE safety (optional). Option Description Packing quantity None Standard DIP-4 45 units per tube M Wide lead bend (0.4 inch spacing) 45 units per tube S (TA) Surface mount lead form + TA tape & reel option 1000 units per reel S (TB) Surface mount lead form + TB tape & reel option 1000 units per reel S1 (TA) Surface mount lead form (low profile) + TA tape & reel option 1000 units per reel S1 (TB) Surface mount lead form (low profile) + TB tape & reel option 1000 units per reel Everlight Electronics Co., Ltd. Document No：DPC-0000025 6 Rev. 2 http://www.everlight.com December 28, 2009 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL825 Series Package Drawing (Dimensions in mm) Standard DIP Type Option M Type Everlight Electronics Co., Ltd. Document No：DPC-0000025 7 Rev. 2 http://www.everlight.com December 28, 2009 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL825 Series Option S Type Option S1 Type Everlight Electronics Co., Ltd. Document No：DPC-0000025 8 Rev. 2 http://www.everlight.com December 28, 2009 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL825 Series Recommended pad layout for surface mount leadform Device Marking EL 825 YWWV Notes EL 825 Y WW V denotes EVERLIGHT denotes Device Number denotes 1 digit Year code denotes 2 digit Week code denotes VDE optional Everlight Electronics Co., Ltd. Document No：DPC-0000025 9 Rev. 2 http://www.everlight.com December 28, 2009 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL825 Series Tape & Reel Packing Specifications Option TA Option TB Direction of feed from reel Direction of feed from reel Tape dimensions Dimension No. A B Do D1 E F Dimension(mm) 10.4±0.1 10.0±0.1 1.5±0.1 1.5±0.1 1.75±0.1 7.5±0.1 Dimension No. Po P1 P2 t W K Dimension(mm) 4.0±0.1 12.0±0.1 2.0±0.1 0.4±0.1 16.0+0.3/ -0.1 4.5±0.1 Everlight Electronics Co., Ltd. Document No：DPC-0000025 10 Rev. 2 http://www.everlight.com December 28, 2009 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL825 Series Solder Reflow Temperature Profile 260 °C (peak 10s Max) >255 °C (30s Max) 217°C 1-3 °C/Sec Max 200°C 60 – 140 Sec 150°C 70 – 170 Sec 1-3 °C/Sec Max TIME (S) Everlight Electronics Co., Ltd. Document No：DPC-0000025 11 Rev. 2 http://www.everlight.com December 28, 2009 4 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER EL825 Series DISCLAIMER 1. The specifications in this datasheet may be changed without notice. EVERLIGHT reserves the authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for use as outlined in this datasheet. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in this datasheet. 3. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without the specific consent of EVERLIGHT. Everlight Electronics Co., Ltd. Document No：DPC-0000025 12 Rev. 2 http://www.everlight.com December 28, 2009