Technical Data Sheet 0.20" Single Digit SMD Display ELSS-206UYWA/S530-A3/S290 Features ․Packaged in tape and reel for SMT manufacturing. ․Design flexibility(common cathode or anode). ․Categorized for luminous intensity. ․The thickness is thinness than tradition display. ․Pb free ․The product itself will remain with RoHS compliant version. Descriptions ․The SMD type is much smaller than tradition type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Applications ․Suitable for indoor use. ․Audio system. ․Set top box. ․Game machine. ․Channel indicator of TV. Device Selection Guide Chip Material Emitted Color AlGaInP Brilliant Yellow Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DDF-0000357 Prepared date: 2009/06/05 Face Color Gray Rev. 2 Page 1 of 8 Prepared by: Sun Li Technical Data Sheet 0.20" Single Digit SMD Display ELSS-206UYWA/S530-A3/S290 Package Dimensions Land Pattern (Recommend) 7.20 5.76 1.00 2.50 2.88 9 8 1.44 1.15 CL 10 CL CL 0.50 7 6 C L 10.10 C L C L 1.05 B G E C D DP +0.05 REF 1 2 3 4 2.80 5.08 8.00 10.10 F 2.19 1.25 A 5 0.03-0.03 10-R0.33 0.40 PCB 0.80 10° 3. 20 3,8 Internal Connection Diagram 1. Cathode E 2. Cathode D 3. Comman Anode 4. Cathode C 5. Cathode DP 6. Cathode B 7. Cathode A A B C D E F G DP 8. Comman Anode 7 6 4 2 1 9 10 5 9. Cathode F 10. Cathode G Notes: ․All dimensions are in millimeters, tolerance is 0.25mm unless otherwise noted. ․Above specification may be changed without notice. Supplier will reserve authority on material change for above specification. Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Units IF 25 mA IFP 60 Operating Temperature Topr -40 ~ +105 mA ℃ Storage Temperature Tstg -40 ~ +105 ℃ Reflow Temperature*2 Tref 260 ℃ Electrostatic Discharge ESD 2000 V Pd 60 mW Forward Current Pulse Forward Current *1 Power Dissipation Reverse Voltage VR 5 Notes: *1:IFP Conditions--Pulse Width≦10msec and Duty≦1/10. *2:Reflow time≦5 seconds. Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DDF-0000357 Prepared date: 2009/06/05 V Rev. 2 Page 2 of 8 Prepared by: Sun Li Technical Data Sheet 0.20" Single Digit SMD Display ELSS-206UYWA/S530-A3/S290 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Units Condition Forward Voltage VF -- 2.0 2.4 V IF=20mA Reverse Current IR -- -- 10 μA VR=5V IV 7.8 16.7 mcd IF=10mA Per segment ---- Luminous Intensity Per decimal point IV 3.4 8.7 ---- Peak Wavelenght λp -- 591 -- nm IF=20mA Dominant Wavelenght λd -- 589 -- nm IF=20mA Spectrum Radiation Bandwidth △λ -- 15 -- nm IF=20mA Bin Range of Luminous Intensity (Unit: mcd) Rank Min. Max. Rank Min. Max. Q 7.8 12.5 T 21.0 34.0 R 11.0 17.6 U 30.0 48.0 S 15.0 24.0 V 42.0 67.0 Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DDF-0000357 Prepared date: 2009/06/05 Rev. 2 Page 3 of 8 Prepared by: Sun Li Technical Data Sheet 0.20" Single Digit SMD Display ELSS-206UYWA/S530-A3/S290 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DDF-0000357 Prepared date: 2009/06/05 Rev. 2 Page 4 of 8 Prepared by: Sun Li Technical Data Sheet 0.20" Single Digit SMD Display ELSS-206UYWA/S530-A3/S290 ■ Reflow Temp. / Time : ■ Soldering Iron : Basic spec is ≦5 sec when 260℃. If temperature is higher, time should be shorter (+10℃ → -1sec). Power dissipation of iron should be smaller than 15 W, and temperature should be controllable. Surface temperature of the device should be under 230 ℃. ■ Rework : 1. Customer must finish rework within 5 sec under 260℃. 2. The head of iron can not touch copper foil. Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DDF-0000357 Prepared date: 2009/06/05 Rev. 2 Page 5 of 8 Prepared by: Sun Li Technical Data Sheet 0.20" Single Digit SMD Display ELSS-206UYWA/S530-A3/S290 ■ Reliability test items and conditions: The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Failure Judgment Criteria NO Item Test Conditions Test Hours/Cycle Sample Size 1 Reflow Soldering TEMP:260°C±5°C 5~10 SEC 6 Min 22 PCS 0/1 Temperature Cycle H：+100°C 15min ∫ 5min L：-40°C 15min 300 Cycles 22 PCS 0/1 Thermal Shock H：+100°C 5min ∫ 10 sec L：-10°C 5min 300 Cycles 22 PCS 0/1 2 3 1000 HRS Iv≦Ivt*0.5 or 22PCS VF≧U or VF≦L 22 PCS 0/1 1000 HRS 22 PCS 0/1 4 High Temperature Storage TEMP:105°C 1000 HRS 5 Low Temperature Storage TEMP:-40°C DC Operating Life TEMP:25°C If＝10mA 6 Ac/Re High 85°C / 85% RH 7 Temperature / 1000 HRS 22 PCS High Humidity Note：Ivt：The test Iv value of the chip before the reliability test Iv：The test value of the chip that has completed the reliability test U：Upper Specification Limit L： Lower Specification Limit Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DDF-0000357 Prepared date: 2009/06/05 Rev. 2 0/1 0/1 Page 6 of 8 Prepared by: Sun Li Technical Data Sheet 0.20" Single Digit SMD Display ELSS-206UYWA/S530-A3/S290 Package Dimensions B(2.30) 03 03 03 03 03 8 9 10 C(100) 03 5 6 7 11 12 1 2 3 4 A(24.5) 1 2 3 6 P S 4 5 6 7 8 D( 33 0) F G E R1 P(12.0) B1(10.4) B0(11.4) D1(1.5) A1(7.5) A0(8.5) T B2(6.4) P0(4.0) D0 (1 .5 ) P2(2.0) W(24.0) F(11.5) E(1.75) Taping Dimensions K0(2.8) A2(4.0) Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DDF-0000357 Prepared date: 2009/06/05 Rev. 2 Page 7 of 8 Prepared by: Sun Li Technical Data Sheet 0.20" Single Digit SMD Display ELSS-206UYWA/S530-A3/S290 Packing Quantity Specification 1500PCS/Roll，1Roll/Small box, 7Small boxes/Box Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number DC: Year and weekly REFERENCE: Label identify code Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT Corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No: DDF-0000357 Prepared date: 2009/06/05 Rev. 2 Page 8 of 8 Prepared by: Sun Li