Technical Data Sheet Opto Interrupter ITR ITR20004 █ Features ˙Fast response time ˙High sensitivity ˙Cut-Off visible wavelength ˙Thin ˙Compact ˙Pb free █ Descriptions ITR20004 is a light reflection switch which includes a GaAs IR-LED transmitter and a NPN photo transistor with a high photosensitive receiver for short distance, operating in the infrared range. Both components are mounted side- by- side in a plastic package. █ Applications ˙Camera ˙VCR ˙Floppy disk driver ˙Cassette type recorder ˙Various microcomputer control equipment █ Device Selection Guide Device No. Chip Material IR GaAs PT Silicon Everlight Electronics Co., Ltd. http:\\www.everlight.com Device No：DRX-004-106 Prepared date: 2007/08/08 Rev 2 Page: 1 of 9 Prepared by: Vic Liao ITR20004 █Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.25mm Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 2 of 8 Device No：DRX-004-106 Prepared date: 2007/8/8 Prepared by: Vic Liao ITR20004 █Absolute Maximum Ratings (Ta=25℃) Parameter Power Dissipation at(or below) 25℃ Free Symbol Ratings Unit Pd 130 mW Reverse Voltage VR 5 V Forward Current IF 50 mA Peak Forward Current (*1) Pulse width ≦100μs, Duty cycle=1% IFP 1 A Collector Power Dissipation PC 75 mW Collector Current IC 50 mA Collector-Emitter Voltage B VCEO 30 V Emitter-Collector Voltage B VECO 5 Operating Temperature Topr -25~+85 V ℃ Storage Temperature Tstg -30~+85 ℃ 260 ℃ Air Temperature Input Output Lead Soldering Temperature (*2) (＊1) tw=100 μsec. , T=10 msec. Tsol t=5 Sec (＊2) █Electro-Optical Characteristics (Ta=25℃) Parameter Input Output Symbol Min. Typ. Max. Unit Conditions Forward Voltage VF - 1.2 1.6 V IF=20mA Reverse Current IR - - 10 μA VR=5V Peak Wavelength λP - 940 - nm - ICEO - - 0.1 μA VCE=20V, B 34 - 71 uA C 20 - 90 VCE=2V, IF=4mA ICEOD - - 1 μA VCE=5V, IF=10mA Rise time tr - 20 - μs Fall time tf - 20 - μs Dark Current Collector Current IC(ON) Leakage Current Transfer Characteristics VCE=2V IC=100uA RL=1000Ω Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 3 of 8 Device No：DRX-004-106 Prepared date: 2007/8/8 Prepared by: Vic Liao ITR20004 █ Typical Electrical/Optical/Characteristics Curves for IR Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 4 of 8 Device No：DRX-004-106 Prepared date: 2007/8/8 Prepared by: Vic Liao ITR20004 █ Typical Electrical/Optical/Characteristics Curves for PT Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 5 of 8 Device No：DRX-004-106 Prepared date: 2007/8/8 Prepared by: Vic Liao ITR20004 █ Typical Electrical/Optical/Characteristics Curves for ITR (μ μ (kΩ ) Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 6 of 8 Device No：DRX-004-106 Prepared date: 2007/8/8 Prepared by: Vic Liao ITR20004 █Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% NO. Item 1 Solderability Test Conditions Test Hours/ Sample Failure Cycles Sizes Judgement Criteria TEMP.：230℃±5℃ 5secs 22pcs Ac/Re More than 90% of 0/1 lead to be covered 2 Temperature Cycle H : +85℃ L : -55℃ 3 Thermal Shock 30mins 50Cycles 5mins 30mins 22pcs 5mins 50Cycles 10secs 5mins 22pcs H :+100℃ L :-10℃ by soldering IR≧U×2 0/1 Ee≦L×0.8 VF≧U×1.2 0/1 U：Upper Specification Limit L：Lower 4 High Temperature Storage TEMP.：+100℃ 1000hrs 22pcs 5 Low Temperature Storage TEMP.：-55℃ 1000hrs 22pcs 1000hrs 22pcs 0/1 1000hrs 22pcs 0/1 6 DC Operating Life IF=20mA Vce=5V 7 High Temperature/ 85℃ / 85% R.H Specification Limit 0/1 0/1 High Humidity █Recommended Method of Storage z z z The following are general recommendations for moisture sensitive level (MSL) 4 storage and use: Shelf life in sealed bag: 12 months at < 40 °C and < 90% relative humidity (RH) After bag is opened, devices that will be subjected to reflow solder or other high temperature process must a) Mounted within 72 hours of factory conditions < 30 °C/60%RH, or b) Stored at <20% RH z Devices require bake, before mounting, if: Humidity Indicator Card is > 20% when read at 23 ± 5 °C If baking is required, devices may be baked: a) 192 hours at 40℃,and <5% RH(dry air/nitrogen) or b) 96 hours at 60℃,and <5% RH for all device containers c) 24 hours at 125 °C Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 7 of 8 Device No：DRX-004-106 Prepared date: 2007/8/8 Prepared by: Vic Liao ITR20004 █ Packing Specifications 1. 100 Pcs/1 Tube 2. 44 Tube /1 Box 3. 6 Box/ 1 Carton Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: None HUE: None REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2 Page: 8 of 8 Device No：DRX-004-106 Prepared date: 2007/8/8 Prepared by: Vic Liao