Technical Data Sheet 1206 Package Phototransistor With Inner Lens PT11-21B/L41/TR8 Features ˙Fast response time ˙High photo sensitivity ˙Small junction capacitance Descriptions ˙PT11-21B/L41/TR8 is a phototransistor in miniature SMD package which is molded in black plastic with flat top view lens. The device is spectrally matched to infrared emitting diode. Applications ˙Automatic door sensor ˙Copier ˙Game machine ˙Infrared applied systm Device Selection Guide LED Part No. Chip Material Lens Color PT Silicon Black Everlight Electronics Co., Ltd. Device No：DTT-011-115 http:\\www.everlight.com Prepared date：03-17-2003 Rev 1.0 Page: 1 of 10 Prepared by：Jaine Tsai PT11-21B/L41/TR8 Package Dimensions Collector Emitter Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ± 0.1mm Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Units Collector-Emitter Voltage VCEO 60 Emitter-Collector-Voltage VECO 5 V V IC 20 mA Operating Temperature Topr -25 ~ +85 ℃ Storage Temperature Tstg -40 ~ +85 ℃ Soldering Temperature Tsol 260 ℃ Power Dissipation at(or below) 25℃Free Air Temperature Pc 75 mW Collector Current Notes: *1:Soldering time≦5 seconds. Everlight Electronics Co., Ltd. Device No：DTT-011-115 http:\\www.everlight.com Prepared date：03-17-2003 Rev 1.0 Page: 2 of 10 Prepared by：Jaine Tsai PT11-21B/L41/TR8 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Condition Min Typ Max Unit Rang Of Spectral Bandwidth λ0.5 --- 730 --- 1100 nm Wavelength Of Peak Sensitivity λP --- --- 940 --- nm Collector-Emitter Breakdown Voltage BVCEO IC=100μA Ee=0mW/cm2 60 --- --- V Emitter-Collector Breakdown Voltage BVECO 5 --- --- V Collector-Emitter Saturation Voltage VCE(sat) IC=2mA Ee=1m W/cm2 --- --- 0.4 V Collector Dark Current ICEO VCE=20V Ee=0mW/cm2 --- --- 100 nA On State Collector Current IC(ON) VCE=5V Ee=1mW /cm2 0.3 0.75 --- 15 --- --- 15 --- Rise Time tr Fall Time tf Everlight Electronics Co., Ltd. Device No：DTT-011-115 IE=100μA Ee=0mW/cm2 VCE=5V IC=1mA RL=1000Ω http:\\www.everlight.com Prepared date：03-17-2003 mA μS Rev 1.0 Page: 3 of 10 Prepared by：Jaine Tsai PT11-21B/L41/TR8 Typical Electro-Optical Characteristics Curves Fig.1Collector Power Dissipation vs. Ambient Temperature Fig.2 Spectral Sensitivity 1.0 100 Ta=25 C 80 0.8 60 0.6 40 0.4 20 0.2 0 -25 25 0 50 75 85 100 Fig.3 Relative Collector Current vs. Ambient Temperature 0 700 800 900 1000 1100 1300 Fig.4 Collector Current vs. Irradiance 10 160 C 2 140 1 120 100 80 0.1 60 40 0.01 20 0 0 10 20 30 40 50 60 70 0.001 0.01 0.1 1 10 2 Everlight Electronics Co., Ltd. Device No：DTT-011-115 http:\\www.everlight.com Prepared date：03-17-2003 Rev 1.0 Page: 4 of 10 Prepared by：Jaine Tsai PT11-21B/L41/TR8 Typical Electro-Optical Characteristics Curves Fig.5 Collector Dark Current vs. Ambient Temperature Fig.6 Collector Current vs. Collector-Emitter Voltage 10 14 12 10 10 8 10 6 4 10 2 10 0 25 50 Everlight Electronics Co., Ltd. Device No：DTT-011-115 75 100 0 0 http:\\www.everlight.com Prepared date：03-17-2003 1 2 Rev 1.0 3 Page: 5 of 10 Prepared by：Jaine Tsai 4 PT11-21B/L41/TR8 Package Dimensions Loaded Quantity Per Reel 2000PCS/Reel Collector Emitter Unit : mm Everlight Electronics Co., Ltd. Device No：DTT-011-115 http:\\www.everlight.com Prepared date：03-17-2003 Rev 1.0 Page: 6 of 10 Prepared by：Jaine Tsai PT11-21B/L41/TR8 Soldering heat reliability(DIP) Please refer to the following figure Soldering Iron Basic spec is ≦5 sec when 260℃. If temperature is higher , time should be shorter (+10℃ -1sec ).Power dissipation of Iron should be smaller than 15W ,and temperature should be controllable. Surface temperature of the device should be under 230℃. Rework 1.Customer must finish rework within 5 sec under 245℃ 2.The head of iron can not touch copper foil. 3.Twin-head type is preferred. Everlight Electronics Co., Ltd. Device No：DTT-011-115 http:\\www.everlight.com Prepared date：03-17-2003 Rev 1.0 Page: 7 of 10 Prepared by：Jaine Tsai PT11-21B/L41/TR8 Reflow Temp./Time Precautions For Use 1.Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change(Burn out will happen). 2.Storage 2.1 The operation of temperature and R.H are：5℃ ~ 35℃ ， R.H.60%. 2.2 Once the package is opened , the products be should be used within a week. Otherwise , they should be keep in a damp proof box with desiccation anent. Considering the tape life , we suggest our customers to use products within a year (from production date). 2-3.If opened more than one week in an atmosphere 5℃ ~35℃，R.H.60%.,they should be treated at 60℃± 5℃ for 15hrs. 2-4.When you discover that the desiccant in the package has a pink color(normal=blue), you should treat them in the same conditions as 2.3 Everlight Electronics Co., Ltd. Device No：DTT-011-115 http:\\www.everlight.com Prepared date：03-17-2003 Rev 1.0 Page: 8 of 10 Prepared by：Jaine Tsai PT11-21B/L41/TR8 Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% NO. Item Test Conditions Test Hours/ Sample Cycles Sizes TEMP.：240℃± 5℃ 6Mins 5secs 30mins 50Cycles 2 Temperature Cycle H : +85℃ 5mins L : -55℃ 30mins 1 REFLOW 3 Thermal Shock H :+100℃ 5mins 50Cycles 10secs 5mins L :-10℃ Failure Judgement Criteria Ac/Re 22pcs 22pcs 0/1 IC(ON)≦L× 0.8 0/1 L：Lower 22pcs Specification Limit 0/1 4 High Temperature Storage TEMP.：+100℃ 1000hrs 22pcs 0/1 5 Low Temperature Storage TEMP.：-55℃ 1000hrs 22pcs 0/1 1000hrs 22pcs 0/1 1000hrs 22pcs 0/1 6 DC Operating Life VCE=5V 7 High Temperature/ 85℃ / 85% R.H High Humidity Everlight Electronics Co., Ltd. Device No：DTT-011-115 http:\\www.everlight.com Prepared date：03-17-2003 Rev 1.0 Page: 9 of 10 Prepared by：Jaine Tsai PT11-21B/L41/TR8 Packing Quantity Specification 1.2000Pcs/1Volume，1Volume/1Bag 2.10Boxes/1Carton Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place PT11-21B/L41/TR8 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No：DTT-011-115 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com http:\\www.everlight.com Prepared date：03-17-2003 Rev 1.0 Page: 10 of 10 Prepared by：Jaine Tsai