DF005S - DF10S 0.255 (6.477) 0.245 (6.223) 0.042 (1.067) 0.038 (0.965) + Features • Surge overload rating: 50 amperes peak. • Glass passivated junction. • Low leakage. 0.335 (8.509) 0.320 (8.128) 0.205 (5.207) 0.195 (4.953) Dimensions are in: inches (mm) SDIP 0.310 (7.874) 0.290 (7.366) LOW PROFILE ALSO AVAILABLE 0.009 (0.229) Typical BODY - - 0.102 (2.591)* 0.095 (2.413)* 0.135 (3.429)* 0.115 (2.921)* 0.060 (1.524) 0.040 (1.016) 0.008 (0.203) 0.004 (0.102) 0.410 (10.414) 0.360 ( 9.144) 1.5 Ampere Bridge Rectifiers Absolute Maximum Ratings* Symbol IO TA = 25°C unless otherwise noted Parameter Value Units 1.5 A 50 A 3.1 25 40 W mW/°C °C/W RθJA Average Rectified Current @ TA = 40°C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient,** per leg Tstg Storage Temperature Range -55 to +150 °C TJ Operating Junction Temperature -55 to +150 °C if(surge) PD *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on PCB with 0.5 x 0.5" (13 x 13 mm). Electrical Characteristics TA = 25°C unless otherwise noted Parameter Device Units 005S 01S 02S 04S 06S 08S 10S Peak Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V DC Reverse Voltage (Rated VR) Maximum Reverse Leakage, total bridge @ rated VR TA = 25°C TA = 125°C Maximum Forward Voltage Drop, per bridge @ 1.0 A 2 I t rating for fusing t < 8.35 ms 50 100 200 400 600 800 1000 V Typical Junction Capacitance, per leg VR = 4.0 V, f = 1.0 MHz 1998 Fairchild Semiconductor Corporation 5.0 500 µA µA 1.1 10 V 2 A Sec 25 pF DF005S-DF10S, Rev. A DF005S - DF10S Discrete POWER & Signal Technologies (continued) Typical Characteristics Non-Repetitive Surge Current Output Rectified Current 1.5 FORWARD CURRENT (A) FORWARD SURGE CURRENT (A) 50 40 30 20 10 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 1 0.5 0 20 100 Forward Characteristics 160 10 REVERSE CURRENT ( µ A) FORWARD CURRENT (A) 60 80 100 120 140 AMBIENT TEMPERATURE (º C) Reverse Characteristics 10 1 0.1 TA = 25º C Pulse Width = 200µs 0.01 0.4 40 0.6 0.8 1 1.2 FORWARD VOLTAGE (V) 1.4 T A = 100 º C 1 0.1 TA = 25 º C 0.01 0 20 40 60 80 100 120 NORMALIZED REVERSE VOLTAGE (%) 140 DF005S-DF10S, Rev. A DF005S - DF10S Bridge Rectifiers TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.