10 Amp SCHOTTKY BARRIER RECTIFIERS FBR1035&1045 Data Sheet Mechanical Dimensions Description JEDEC T0-220AC .150 .350 .240 .200 .390 .107 Features n HIGH CURRENT CAPABILITY WITH LOW VF n HIGH SURGE VOLTAGE AND TRANSIENT PROTECTION n SUPERIOR METAL PROCESS n MEETS UL SPECIFICATION 94V-0 Electrical Characteristics @ 25o C. Maximum Ratings Units FBR1035 & 1045 FBR1035 FBR1045 Peak Repetitive Reverse Voltage...VRRM 35 45 Volts Working Peak Reverse Voltage...VRWM 35 45 Volts DC Blocking Voltage...VDC 35 45 Volts RMS Reverse Voltage...VR(rms) 24 31 Volts Average Forward Rectified Current...IF(av) TC = 110°C ............................................. 1 0 ............................................... Amps Repetitive Peak Forward Surge Current...IFM ............................................. 2 0 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM @ Rated Load Conditions, ½ Wave, 60HZ, Single Phase ............................................. 1 5 0 ............................................... Amps ............................................. .84 ............................................... ............................................. .72 ............................................... ............................................. .57 ............................................... Volts Volts Volts Forward Voltage...VF @ IF = 20 Amps, 25°C @ IF = 20 Amps, 125°C @ IF = 10 Amps, 125°C DC Reverse Current...IR @ Rated DC Blocking Voltage TL = 25°C TL =125°C ............................................. . 1 ............................................... mAmps ............................................. 1 5 ............................................... mAmps Operating Temperature Range...T J ......................................... -65 to 150 .......................................... °C Storage Temperature Range...TSTRG ......................................... -65 to 175 .......................................... °C Page 7-14 Forward Current Derating Curve Amps Reverse Current (mA) Typical Reverse Characteristics Lead Temperature (oC) Reverse Voltage (Volts) Typical Junction Capacitance pF Amps Typical Forward Characteristics Forward Voltage (Volts) Case Positive, No Suffix Required Reverse Voltage (Volts) Case Negative, Use Suffix "R" Typical Forward Characteristics 2 Case 1 Amps 1 FBR1035&1045 10 Amp SCHOTTKY BARRIER RECTIFIERS Data Sheet 3 3 Forward Voltage (Volts) NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V. 2. Thermal Resistance Junction to Case, Jedec Method. 3. When Mounted to heat sink, from body. 2 Case Ratings at 25 Deg. C ambient temperature unless otherwise specified. Single Phase Half Wave, 60 HZ Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. Page 7-15