3.0 Amp Glass Passivated Sintered Fast Recovery Rectifiers RGFZ30A . . . 30M Series Preliminary Data Sheet Mechanical Dimensions Description 6.60/7.11 Package SMC 5.59/6.10 7.75/8.12 .15/.30 .171 1.91/2.41 .051/.152 Features n LOWEST COST FOR GLASS SINTERED FAST RECOVERY CONSTRUCTION n 3.0 AMP OPERATION @ TA = 55°C, WITH NO THERMAL RUNAWAY n LOWEST VF FOR GLASS SINTERED FAST RECOVERY CONSTRUCTION n SINTERED GLASS CAVITY-FREE JUNCTION n TYPICAL IR < 100 nAmps Electrical Characteristics @ 25 o C. Maximum Ratings Units RGFZ30A . . . 30M Series 30A 30B 30D 30G 30J 30K 30M 100 200 400 600 800 1000 Volts Peak Repetitive Reverse Voltage...VRRM 50 RMS Reverse Voltage...VR(rms) 35 70 140 280 420 560 700 Volts DC Blocking Voltage...VDC 50 100 200 400 600 800 1000 Volts Average Forward Rectified Current...IF(av) Current 3/8" Lead Length @ TA = 55°C ............................................. 3.0 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM 8.3mS, ½ Sine Wave Superimposed on Rated Load ............................................. 1 2 5 ............................................... Amps Forward Voltage @ 3.0A...VF ............................................. 1.3 ............................................... Volts Full Load Reverse Current...IR(av) Full Cycle Average @ TA = 55°C ............................................. 1 0 0 ............................................... µAmps ............................................. 5.0 ............................................... ............................................. 1 0 0 ............................................... µAmps Typical Junction Capacitance...CJ (Note 1) ............................................. 6 0 ............................................... pF Typical Thermal Resistance...RθJA (Note 2) ............................................. 1 5 ............................................... °C / W Maximum Reverse Recovery Time...tRR (Note 3) < ..................... 1 5 0 ................... > DC Reverse Current...IR(max) @ Rated DC Blocking Voltage T A = 25°C TA = 125°C < ....... 5 0 0 ...... > nS Operating & Storage Temperature Range...TJ, TSTRG ......................................... -65 to 175 .......................................... °C 250 Preliminary Data Sheet 3.0 Amp Glass Passivated Die Dimension (mils) Forward Current Derating Curve A RESISTIVE OR INDUCTIVE LOAD T Amps D Glass 0.375″″ (9.5mm) LEAD LENGTH G d D 126 TA = Ambient Temperature (°°C) d G 86 2+0.5 T 11 A 15+1 Typical Junction Capacitance Non-Repetitive Peak Forward Surge Current TJ = 25°°C f = 1.0 MHZ VSIG = 50mVp-p Amps pF TJ = TJ max. 8.3 mS Single Half Sine Wave (Jedec Method) RGFZ30A . . . 30M Series Sintered Fast Switching Rectifiers Number of Cycles @ 60 HZ Typical Instantaneous Forward Characteristics Typical Reverse Characteristics Amps µ Amps Reverse Voltage (Volts) Volts Ratings at 25 Deg. C ambient temperature unless otherwise specified. Percent of Rated Peak Voltage NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V. 2. 5.0mm2 (.013mm thick) land areas. 3. Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A. Single Phase Half Wave, 60 HZ Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%.