UGFZ10A . . . 10G Series Preliminary Data Sheet 1.0 Amp Glass Passivated Sintered Ultra - Fast Rectifiers Mechanical Dimensions Description Package SMA Features n LOWEST COST FOR GLASS SINTERED ULTRA - FAST CONSTRUCTION n 1.0 AMP OPERATION @ T A = 55°C, WITH NO THERMAL RUNAWAY n LOWEST VF FOR GLASS SINTERED ULTRA - FAST CONSTRUCTION n SINTERED GLASS CAVITY-FREE JUNCTION n TYPICAL IR < 100 nAmps Electrical Characteristics @ 25 o C. Maximum Ratings Units UGFZ10A . . . 10G Series 10A 10B Peak Repetitive Reverse Voltage...VRRM 50 100 200 400 Volts RMS Reverse Voltage...VR(rms) 35 70 140 280 Volts 50 100 200 400 Volts DC Blocking Voltage...VDC 10D 10G Average Forward Rectified Current...IF(av) @ TA = 55°C (Note 2) ............................................. 1.0 ............................................... Amps Non-Repetitive Peak Forward Surge Current...IFSM ½ Sine Wave Superimposed on Rated Load ............................................. 3 0 ............................................... Amps Forward Voltage @ 1.0A...VF < ................................... 0.95 ............................... > Volts Full Load Reverse Current...IR(av) Full Cycle Average @ TA = 135°C ............................................. 3 0 ............................................... µAmps ............................................. 5.0 ............................................... ............................................. 2 0 0 ............................................... µAmps µAmps Typical Thermal Resistance...RθJA (Note 2) ............................................. 4 5 ............................................... °C / W Maximum Reverse Recovery Time...tRR (Note 3) ............................................. 3 5 ............................................... nS Operating & Storage Temperature Range...TJ, TSTRG ......................................... -65 to 175 .......................................... °C DC Reverse Current...IR(max) @ Rated DC Blocking Voltage TA = 25°C TA = 150°C NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V. 2. 5.0mm2 (.013mm thick) land areas. 3. Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A. 1.25