HIGH POWER FYLP FYLP-5W-UBL UBL Features: Instant light Relative Lumionous Intensity(LOP @max=1) Package Dimensions Applications 20(.787) 15(.59) 7.3（0.287）±0.1(.004) 4.5(.177) + - + + - 4 60° 1.5(.06) Reading lights (car,bus,aircraft) LCD Backlights /light Guides Fiber optic alternative/Decorative/Entertainment Mini-accent/Up lighters/Down lighters/ Orientation Indoor/Outdoor commerclal and Residentlal Architectural Cove/Under shelf /Task Bollards/Security/Garden Portable(flashlight,bicycle) Edge-lit signs (Exit, point of sale) Automotive Exit (stop –tail-Turn ,CHMSL,Mirror Side Repeat) Trafficsignaling /Beacons/railCrossing and Wayside. 7.85(.31) 6.8(.268)±0.1(.004) Long operating life Highest flux per Led family in the world. Available in Blue Lambertian radiation pattern More energy efficient than incandescent and most halogen lamps Low voltage DC operated Cool beam,safe to the touch Instant light (less than 100ns) Fully dimmable. No UV Superior ESD protection Eutectic die bonding ROHS compliant Radiation Pattern HIGH POWER Typical Optical/Electrical Characteristics@TJ=25℃ Item symbol Condition Min Typ Max Unit 3.2 -- 4.2 V 50 uA Forward Voltage VF IF=1.2A Reverse Current IR VR=5V 50% Power Angle 2θ1/2 IF=1.2mA 100 110 120 deg Luminous Intensity Фv IF=1.2mA 25 35 - LM Recommend Forward Current IF Wave length λd IF=1.2A Thermal Resistance,Junction to Case Rjp IF=1.2A 1.2 460 -- A 470 18 nm ℃/W Notes: 1. Tolerance of measurement of forward voltage±0.1v 2. Tolerance of measurement of peak Wavelength ±2.0nm 3. Tolerance of measurement of luminous intensity ±15%. Absolute Maximum Rating Item Forward Current Peak Forward Current* Reverse Voltage Power Dissipation Electrostatic discharge Operation Temperature Storage Temperature Lead Soldering Temperature* symbol Absolute Maximum Rating Unit IF IFD VR PD Esd TOPR TSTG TSOL 1.2 1.3 5 5 4500 A A V W V -30℃ to +80℃ -40℃ to +100℃ 260℃ for 3 Seconds Max IFP Conditions :Pulse Width≤10 msec duty≤1/10 All high Power emitter LED products mounted on aluminum metal-core printed circuit board, can be lighted directly ,but we do not recommend lighting the high power products for more than 5 seconds without a directly,but we do not recommend lighting the high powe products for more than 5 seconds without a appropriate heat dissipation equipment. Re-flow, wave peak and soak-stannum soldering etc. is not suitable for this products. Sueggest to solder it by professional high power LED soldering machine. Can use invariable –temperature searing-iron with soldering condition: ≤260 degreen less than 3 seconds. HIGH POWER Typical optical/Electrical Characteristics Curves (Tj=25℃ Unless Otherwise Noted)