SMD FYLS- 0805PGC Radiation pattern. Features: z z Compatible with automatic placement equipment. Compatible with reflow solder process. Applications: z z z z Automotive-Telecommunication. Indicators. Water clear Illuminations. Relative Lumionous Intensity(LOP @max=1) Descriptions: z z z Dice material: InGaN Emitting Color: Super bright Pure Green Lens Color: Water clear. Absolute maximum ratings(Ta=25 ゜с) Parameter MAX. Unit 70 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current 100 mA 20 mA Derating Linear From 25℃ 0.4 mA/℃ Power Dissipation Operating Temperature Range -30℃ to +80℃ Storage Temperature Range -40℃ to +85℃ Electrical and optical characteristics(Ta=25 ゜с) Parameter Symbol Min. Typ. Max. Unit IV -- 200 -- mcd Viewing Angle 2θ1/2 -- 140 -- Deg Peak Emission λp 515 520 525 nm Dominant Wavelength λd 520 -- 525 nm Spectral Line Half-Width △λ 25 30 35 nm Forward Voltage VF 3.2 3.6 V Reverse Current IR 10 µA Luminous Intensity Test Condition IF=20mA VR=5V SMD Typical Electrical Characteristics Curves (25 ゜с Ambient Temperature Unless Otherwise Noted) Normalized Response (1) (1)peak@520nm/pure green Wave Length(nm) Relative Luminous intensity vs Forward current Forward Current Derating Curve Relative Intensity (Lop@20mA=1) Forward Current(mA) 60 50 40 30 20 10 0 0 10 20 30 40 50 60 Ambient Temperature TA ( 70 80 90 Forward Current IF(mA) ) luminous Intensity Vs.Ambient Temperature °C luminous Intensity (IV) Forward Current If(mA) Forward Current vs.Forward Voltage Forward Voltage VF( V) -20 0 20 40 Ambient Temperature C 60 80 SMD Precautions For Use 1.Suggest the LEDs should be kept between 5℃ and 30℃and 60%RH or less before opening the package, The max. storage period before opening the package is 1 year. 2. After opening the package, the LEDs should be kept at 30℃/35%RH or less, and it should be used within3 hours. In the event of incomplete usage, it is advised that user preheat the remaining devices at 60±5℃ for 8 hours prior to use. 3. Reflow soldering should not be done more than twice. When soldering, don’t tress on LEDs during heating. After soldering, don’t warp the circuit board. 4. Repair should not be done after the LEDs have been soldered. When repair is unavoidable, Double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will be damaged by repair or not. Soldering Iron: z Temperature at tip of iron:300 ゜с Max.(25W Max) z Soldering time: 3±1sec. Please refer to the following figure： SMD Package Dimensions of Device l a n i m r e T g n i r e d l o S 0.3 1.25 0.4 1.2 1.25 2.0 lED Die 1.0 1.4 Cathode Mark PCB 0.9 1.2 1.2 Resin 0.3 0.8 0.625 0.4 Unit:mm Tape Specification: 3000pcs Per Reel. Packing Size Item W P1 E F D0 D1 P0 Unit Spec. 8.00 4.00 1.75 3.50 1.50 1.00 4.00 mm Tolerance ±0.20 ±0.10 ±0.10 ±0.05 +0.1/-0 ±0.05 ±0.05 mm Item 10P0 P2 A0 B0 K0 T Unit Spec. 40.00 2.00 1.85 3.45 1.27 0.22 mm Tolerance ±0.20 ±0.05 ±0.10 ±0.10 ±0.10 ±0.05 mm Cathode P2 P0 K0 E A' F D0 W D1 5° P1 A0 t A' SEC:A-A' 13.5±0.2 178±1.0 60+0.5/-0 Package Dimensions of Reel: Unit:mm 12±0.15 9±0.1 Packing and Shipping Spec. SMD L1 sb W1 sb Zip-lock Desiccant Antistatic Bag Spec. Spec. Spec. 203.0. 198.0 Unit:mm ) s c p ( Y T ' Q Box Dimension(cm):30 * 19* 11.5 Desiccant . O N T R A P 10 Reels per box CARTON Dimension(cm):39*32*38 6boxs/carton 0603B/0603/0805: 4000pcs*10Reels*6boxs S G K S G K M C 8 3 * 1 3 * 8 3 W W : S . G . N A E M C/NO 0805B/1206B/1206 1210/1204: 3000pcs*10Reels*6boxs* 3528:2000pcs*10Reels*6boxs 5050:1000pcs*8Reels*6boxs