Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com A GENERAL PURPOSE GLASS PASSIVATED RECTIFIER 1N4001G THRU 1N4007G FEATURES z UL 94V0 FLAME RETARDANT EPOXY MOLDING COMPOUND z GLASS PASSIVATED CHIP JUNCTION z LOW COST z HIGH SURGE CURRENT CAPABILITY 1.0(25.4) MIN .034(0.9) .028(0.7) .205(5.2) .166(4.2) .107(2.7) .080(2.0) MECHANICAL DATA z CASE: TRANSFER MOLDED, DO41, DIMENSIONS IN INCHES AND (MILLIMETERS) z LEADS: SOLDERABLE PER MIL-STD-202, METHOD 208 z POLARITY: CATHODE INDICATED BY COLOR BAND z WEIGHT: 0.34 GRAMS 1.0(25.4) MIN MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS SYMBOL 1N4001G 1N4002G 1N4003G 1N4004G 1N4005G 1N4006G 1N4007G UNITS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT 0.375” (9.5mm) LEAD LENGTH AT TA=55°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) VRRM VRMS VDC CJ 15 PF TYPICAL THERMAL RESISTANCE (NOTE 2) Rθja TSTG TOP 50 ºC /W -55 TO + 175 -55 TO + 175 ºC ºC STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V IO 1.0 A IFSM 30 A ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL 1N4001G 1N4002G 1N4003G 1N4004G 1N4005G 1N4006G 1N4007G UNITS MAXIMUM FORWARD VOLTAGE AT IO DC VF 1.1 MAXIMUM REVERSE CURRENT AT 25 ºC IR 5 MAXIMUM REVERSE CURRENT AT 100 ºC IR 50 NOTE: 1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS 2. BOTH LEADS ATTACHED TO HEAT SINK 20x20x1t(mm) COPPER PLATE AT LEAD LENGTH 5mm 1N4001G THRU 1N4007G V μA μA Page: 1 FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 8.3ms Single Half Sine-Wave (JEDEC Method) 10 .8 INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 1.0 TJ=25℃ Single Phase Half Wave 60Hz Resistive or Inductive Load .6 .4 .2 0 0 25 50 75 100 125 150 4 2 1.0 .4 .2 .1 TJ=25℃ Pulse Width=300us 1% Duty Cycle .04 .02 175 .01 .6 AMBIENT TEMPERATURE, (℃) .8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWRD VOLTAGE, (V) FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT INSTANTANEOUS REVERSE CURRENT, (UA) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 40 30 20 10 0 1 2 4 6 8 10 20 40 60 80100 NUMBER OF CYCLES AT 60HZ 10 4 TJ=100℃ 1.0 .4 .1 .04 TJ=25℃ .01 0 20 40 60 80 100 120 200 100 60 40 20 10 6 4 2 1 .1 1N4001G THRU 1N4007G .2 .4 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 -TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (PF) PEAK FORWARD SURGE CURRENT, (A) 50 1.0 2 4 10 REVERSE VOLTAGE, (V) 20 40 100 Page: 1