Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 1A GENERAL PURPOSE PLASTIC RECTIFIER 1N4001 THRU 1N4007 FEATURES z UL 94V0 FLAME RETARDANT EPOXY MOLDING COMPOUND z DIFFUSED JUNCTION z LOW COST z HIGH SURGE CURRENT CAPABILITY 1.0(25.4) MIN .034(0.9) .028(0.7) .205(5.2) .166(4.2) .107(2.7) .080(2.0) MECHANICAL DATA z CASE: TRANSFER MOLDED, DO41, DIMENSIONS IN INCHES AND (MILLIMETERS) z LEADS: SOLDERABLE PER MIL-STD-202, METHOD 208 z POLARITY: CATHODE INDICATED BY COLOR BAND z WEIGHT: 0.34 GRAMS 1.0(25.4) MIN MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT 0.375” (9.5mm) LEAD LENGTH AT TA=55°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD TYPICAL JUNCTION CAPACITANCE (NOTE 1) STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V IO 1.0 A IFSM 30 A CJ TSTG TOP 15 -55 TO + 175 -55 TO + 175 PF ºC ºC ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS MAXIMUM FORWARD VOLTAGE AT IO DC VF 1.1 V MAXIMUM REVERSE CURRENT AT 25ººC IR 5 μA NOTE: 1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS 1N4001 THRU 1N4007 Page:1 6-5 1.0 A=20 mm 0.8 A=10 mm 0.6 0.2 A=5.5 mm 10mm 10mm 0.4 A=COPPER AREA P.C. BOARD 0 0 20 40 60 80 100 120 140 160 180 Fig. 5-MAXIMUM FORWARD SURGE VS NUMBER OF CYCLES FORWARD SURGE CURRENT AMPERES PK (HALF SINE-WAVE) 1.2 CURRENT (A) Io-AVERAGE RECTIFIED Fig. 1-MAXIMUM CURRENT RATING EFFECT OF COPPER AREA. RESISTIVE/INDUCTIVE 50 40 30 20 10 0 1 10 100 No. OF CYCLES AT 60 Hz TA-AMBIENT TEMPERATURE (OC) Fig. 6-TYPICAL REVERSE CHARACTERISTIC Fig. 2-MAXIMUM CURRENT RATING CAPACITIVE LOAD, 10 mm LEAD LENGTHS IPK IAV 1.0 RESISTIVE / INDUCTIVE LOADS 5 10 20 0.8 0.6 10mm 10mm 0.4 CAPACTIVE LOADS COPPER PC AREA BOARD 5.5mm 0.2 0 20 40 60 80 100 120 140 160 180 IR-REVERSE CURRENT (uA) Io-AVERAGE RECTIFIED CURRENT (A) 1.2 TA-AMBIENT TEMPERATURE (OC ) 1000 500 200 100 50 20 10 TJ=75oC 2 1 TJ=50oC .5 .2 .1 .05 .02 .01 L=5mm L=10mm L=20mm 0.8 0.6 0.4 0.2 10mm 10mm COPPER PC AREA BOARD 5.5mm 0 20 40 60 80 100 120 140 160 180 TJ=25oC 100 200 300 400 500 600 PEAK INVERSE VOLTAGE Fig. 7-TYPICAL JUNCTION CAPACITANCE CJ-JUNCTION CAPACITANCE IO-AVERAGE RECTIFIED CURRENT (A) L=LEAD LENTH 1.0 100 10 0 1 TA-AMBIENT TEMPERATURE (OC) 100 1000 Fig. 8-FORWARD PULSE CURRENT VS PULSE DURATION +150oC 10,000 +25oC 1.0 0.1 .01 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VF-FORWARD VOLTAGE(V) IP-PULSE CURRENT (A) IF-FORWARD CURRENT (A) 10 VR-REVERSE VOLTAGE (V) Fig. 4-TYPICAL FORWARD CHARACTERISTICS 10 TJ=100oC 5 Fig. 3 MAXIMUM CURRENT RATING EFFECT OF LEAD LENGTHS RESISTIVE / INDUCTIVE LOAD 1.2 TJ=125oC 1,000 100 10 0.1uS 1uS 10uS 100uS 1mS 10mS PULSE DURATION (Seconds) 1N4001 THRU 1N4007 Page:2