DIP Switches SPST Standard DIP Switches DX1 Series 0.60 1.1 3.2 MIN 7.10 MAX Ø0.97±0.05 1.40 2.54 TYP. CIRCUIT DX1RRA Raised Actuator Right Angle Type 2.54 x (N - 1) ± 0.10 1.30 2.54 x (N - 1) + 4.10 P.C.B. LAYOUT 10.30 MAX 12.57 Ø0.97±0.05 10.8 30° 2.54 TYP. 0.60 2.54 x (N - 1) 7.62 ± 0.50 DX1PSK Short Key DX1PLK Long Key 3.20 MIN 0.15 ± 0.05 1.84 DX1P 2.54 ± 0.10 2.54 x (N - 1) ± 0.10 1.0 3.50 2.54 ± 0.60 2.90 MIN 9.90 1.60 DIP Switches 0.15 ± 0.05 P.C.B. LAYOUT 1.50 2.54 x (N - 1) DX1R Ø0.97±0.05 CIRCUIT 2.54 x (N - 1) + 3.90 6.20 ± 0.60 2.54 TYP. 0.60 2.54 x (N - 1) DX1TRC Recessed Actuator DX1TRA Raised Actuator Top Type 2.54 x (N - 1) + 3.90 P.C.B. LAYOUT 7.62 ± 0.10 DX1T 0.15 ± 0.05 7.10 MAX 7.62 ± 0.50 9.90 3.50 1.4 7.62 ± 0.10 2.54 x (N - 1) ± 0.10 1.60 CIRCUIT Piano Type How to order: DX1 1 2 General Specifications: 3 4 5 6 7 FEATURES » 1P1T DIP switches with low contact resistance 1 T R P 2 RA RC SK LK 3 02 03 04 05 06 07 08 09 10 12 F01 SWITCH TYPE: Top Type Right Angle Type Piano Type ACTUATOR / KEY: Raised Actuator (Standard) (Only DX1T & DX1R) Recessed Actuator (Only DX1T) Short Key (Only DX1P) Long Key (Only DX1P) NO. OF POSITIONS: 2 Positions 3 Positions 4 Positions 5 Positions 6 Positions 7 Positions 8 Positions 9 Positions 10 Positions 12 Positions [email protected] 4 C G A 5 1 0 COLOR OF COVER: Red Blue Black (G & A: Subject to our final confirmation) ON/OFF-POSITION: Push Down on (Standard) Push Down off (Only DX1P) & high reliability. CONTACT MATERIALS » Phosphor bronze with gold plated over nickel MECHANICAL » Mechanical Life: 2000 operations per switch » Operation Force: 400 gf max. (DX1P) 1000 gf max. (DX1T & DX1R) » Stroke: 2.0 mm 6 N T SEAL: No Tape (Standard) Top Tape Sealed » Operation Temperature: -20°C to +70°C » Storage Temperature: -40°C to +85°C ELECTRICAL 7 TB PACKAGE STYLE: Tube » Electrical Life: 2000 operations per switch » Non-Switching Rating: 100mA, 50VDC » Switching Rating: 25mA, 24VDC » Circuit: Single pole single throw LEADFREE SOLDERING PROCESSES » Wave Soldering: Recommended solder temperature at 260°C max. 5 seconds N = No. of positions General Tolerance: ± 0.2 mm www.greatecs.com