MUR180 ULTRAFAST EFFICIENT GLASS PASSIVATED RECTIFIER VOLTAGE: 800V CURRENT:1.0A DO-15 FEATURE Ultrafast Nanosecond Recovery Times 150°C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction MECHANICAL DATA Case: Epoxy, Molded Weight: 0.4 gram (approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable solder heat resistance :265degreeC Max. for 10 Seconds, 1/16 from case Polarity: Cathode Indicated by Polarity Band Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum Reverse Recovery Time (Note 1) Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical Junction Capacitance (Note 2) Typical thermal resistance junction to ambient (Note 3) Storage and Operating Temperature Range SYMBOL MUR180 units Vrrm Vrms Vdc If(av) 800 640 800 1.0 V V V A Ifsm 35 A Vf 1.75 V Trr nS µA µA Cj 75 10 50 25 Rth(ja) 50 °C/W Tstg, Tj -55 to +150 Ir pF °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES MUR180 Rev.A1 www.gulfsemi.com