HMC264LC3B v03.1208 MIXERS - SUB-HARMONIC - SMT 8 GaAs MMIC SUB-HARMONIC SMT MIXER, 21 - 31 GHz Typical Applications Features The HMC264LC3B is ideal for: Integrated LO Amplifier: -4 to +4 dBm Input • Point-to-Point Radios Sub-Harmonically Pumped (x2) LO • Point-to-Multi-Point Radios & VSAT High 2LO/RF Isolation: 30 dB • Test Equipment & Sensors DC - 6 GHz Wideband IF • Military End-Use RoHS Compliant 3x3 mm SMT Package Functional Diagram General Description The HMC264LC3B is a 21 - 31 GHz Sub-harmonically Pumped (x2) MMIC Mixer with an integrated LO amplifier in a leadless “Pb Free” SMT package. The 2LO to RF isolation is excellent at 30 dB, eliminating the need for additional filtering. The LO amplifier is a single bias (+3V to +4V) design with only -4 to +4 dBm drive requirement. The RF and LO ports are DC blocked and matched to 50 Ohms for ease of use while the IF covers DC to 6 GHz. The HMC264LC3B eliminates the need for wire bonding, allowing use of surface mount manufacturing techniques. Electrical Specifi cations, TA = +25° C, As a Function of LO Drive & Vdd IF = 1 GHz LO = -4 dBm & Vdd = +4V Parameter Min. Typ. IF = 1 GHz LO = -4 dBm & Vdd = +3V Max. Min. Typ. Units Max. Frequency Range, RF 21 - 31 22 - 31 GHz Frequency Range, LO 10.5 - 15.5 11 - 15.5 GHz Frequency Range, IF DC - 6 DC - 6 GHz Conversion Loss 9 12 9 12 Noise Figure (SSB) 9 12 9 12 2LO to RF Isolation 20 30 18 30 2LO to IF Isolation 25 40 25 dB dB 40 dB IP3 (Input) 12 10 dBm 1 dB Compression (Input) +3 +1 dBm Supply Current (Idd) 28 25 mA *Unless otherwise noted, all measurements performed as downconverter, IF= 1 GHz. 8 - 16 dB For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC264LC3B v03.1208 GaAs MMIC SUB-HARMONIC SMT MIXER, 21 - 31 GHz Conversion Gain vs. Temperature @ LO = -4 dBm, Vdd= +3V 0 0 -5 -5 -10 -15 +25 C +85 C -40 C -20 -25 8 -10 -15 +25 C +85 C -40 C -20 -25 19 21 23 25 27 29 31 33 19 21 23 RF FREQUENCY (GHz) 0 0 -5 -5 -10 -15 -8 dBm -6 dBm -4 dBm -2 dBm 0 dBm -25 29 31 33 31 33 -10 -15 -8 dBm -6 dBm -4 dBm -2 dBm 0 dBm -20 -25 19 21 23 25 27 29 31 33 19 21 RF FREQUENCY (GHz) 25 27 29 Isolation @ LO = -4 dBm, Vdd = +3V 10 -10 -10 ISOLATION (dB) 10 -30 RF/IF LO/RF LO/IF 2LO/RF 2LO/IF -50 23 RF FREQUENCY (GHz) Isolation @ LO = -4 dBm, Vdd = +4V ISOLATION (dB) 27 Conversion Gain vs. LO Drive @ Vdd = +3V CONVERSION GAIN (dB) CONVERSION GAIN (dB) Conversion Gain vs. LO Drive @ Vdd = +4V -20 25 RF FREQUENCY (GHz) MIXERS - SUB-HARMONIC - SMT CONVERSION GAIN (dB) CONVERSION GAIN (dB) Conversion Gain vs. Temperature @ LO = -4 dBm, Vdd= +4V -30 RF/IF LO/RF LO/IF 2LO/RF 2LO/IF -50 -70 -70 19 21 23 25 27 FREQUENCY (GHz) 29 31 33 19 21 23 25 27 29 31 33 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 17 HMC264LC3B v03.1208 GaAs MMIC SUB-HARMONIC SMT MIXER, 21 - 31 GHz Input IP3 vs. LO Drive @ Vdd = +3V * 20 15 15 IP3 (dBm) 20 10 5 -6 dBm -4 dBm -2 dBm 0 10 5 -6 dBm -4 dBm -2 dBm 0 -5 -5 19 21 23 25 27 29 31 33 19 21 23 RF FREQUENCY (GHz) 27 29 50 50 40 40 IP2 (dBm) 60 30 33 30 20 -6 dBm -4 dBm -2 dBm 10 0 19 21 23 25 27 -6 dBm -4 dBm -2 dBm 10 29 31 0 19 33 21 23 RF FREQUENCY (GHz) 27 29 31 33 31 33 Input P1dB vs. Temperature @ LO = -4 dBm, Vdd = +3V 10 6 6 P1dB (dBm) 10 2 -2 +25 C +85 C -40 C -6 25 RF FREQUENCY (GHz) Input P1dB vs. Temperature @ LO = -4 dBm, Vdd = +4V 2 -2 +25 C +85 C -40 C -6 -10 -10 19 21 23 25 27 29 31 33 RF FREQUENCY (GHz) 19 21 23 25 27 29 RF FREQUENCY (GHz) * Two-tone input power = -10 dBm each tone, 1 MHz spacing. 8 - 18 31 Input IP2 vs. LO Drive @ Vdd = +3V * 60 20 P1dB (dBm) 25 RF FREQUENCY (GHz) Input IP2 vs. LO Drive @ Vdd = +4V * IP2 (dBm) MIXERS - SUB-HARMONIC - SMT 8 IP3 (dBm) Input IP3 vs. LO Drive @ Vdd = +4V * For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC264LC3B v03.1208 GaAs MMIC SUB-HARMONIC SMT MIXER, 21 - 31 GHz IF Bandwidth @ LO = -4 dBm 0 0 -5 -5 -10 -15 Vdd=+3V Vdd=+4V -20 -25 8 -10 -15 Vdd=+3V Vdd=+4V -20 -25 19 21 23 25 27 29 31 33 0 2 4 RF FREQUENCY (GHz) 6 8 10 8 10 IF FREQUENCY (GHz) RF & LO Return Loss @ LO = -4 dBm IF Return Loss @ LO = -4 dBm 0 0 RETURN LOSS (dB) RETURN LOSS (dB) -2 -5 -10 -15 -4 -6 -8 -10 -12 RF LO -20 -14 0 4 8 12 16 20 24 28 32 0 2 RF FREQUENCY (GHz) MxN Spurious Outputs @ LO = -4 dBm, Vdd = +4V ±5 -2 30 -1 60 ±4 ±3 39 31 0 17 1 2 3 82 46 42 80 82 RF = 30 GHz @ -10 dBm LO = 13.5 GHz @ -4 dBm All values in dBc below IF power level. ±2 6 Absolute Maximum Ratings nLO mRF 4 RF FREQUENCY (GHz) MIXERS - SUB-HARMONIC - SMT CONVERSION GAIN (dB) CONVERSION GAIN (dB) Upconverter Performance Conversion Gain @ LO = -4 dBm ±1 14 -17 X 35 64 64 0 25 RF / IF Input (Vdd = +5V) +13 dBm LO Drive (Vdd = +5V) +13 dBm Vdd 5.5V Channel Temperature 175 °C Continuous Pdiss (Ta = 85 °C) (derate 2.52 mW/°C above 85 °C) 227 mW Thermal Resistance (junction to ground paddle) 397 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 19 HMC264LC3B v03.1208 GaAs MMIC SUB-HARMONIC SMT MIXER, 21 - 31 GHz Outline Drawing MIXERS - SUB-HARMONIC - SMT 8 8 - 20 NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA. 2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL. 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR LASER MARK LOCATED APPROX. AS SHOWN. 6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C – 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Pin Descriptions Pin Number Function Description 1 Vdd Power supply for the LO Amplifier. External RF bypass capacitors are required as close to the package as possible. 2, 3 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 4, 6, 7, 9, 10, 12 GND Package bottom must also be connected to RF/DC ground. 5 LO LO Port. This pin is AC coupled and matched to 50 Ohms from 10.5 - 15.5 GHz. 8 IF IF Port. This pin is DC coupled and should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. Any applied DC voltage to this pin will result in die non-function and possible die failure. 11 RF RF Port. This pin is AC coupled and matched to 50 Ohms from 21 - 31 GHz. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC264LC3B v03.1208 GaAs MMIC SUB-HARMONIC SMT MIXER, 21 - 31 GHz Evaluation PCB MIXERS - SUB-HARMONIC - SMT 8 List of Materials for Evaluation PCB 108779 [1] Item Description J1 - J3 PCB Mount SMA Connector J4, J5 DC Pin C1 100 pF Capacitor, 0402 Pkg. C2 1000 pF Capacitor, 0603 Pkg C3 2.2 μF Capacitor, Tantalum U1 HMC264LC3B Mixer PCB [2] 108777 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 21